With our huge inventory of new, used and rental equipment, WesTrac has the right machine for the job.
Articulated Trucks
Compare Models
UNITS:
Metric
Imperial
Engine
Engine Model
Cat C9.3
Cat C9.3
Cat® C13
Cat® C13
Cat® C13
Cat® C13
Bore
115 mm
4.5 in
130 mm
5.1 in
130 mm
5.1 in
Stroke
1149 mm
45.2 in
157 mm
6.2 in
157 mm
6.2 in
Displacement
9.3 l
567.5 in³
12.5 l
762.8 in³
12.5 l
763 in³
Peak Engine Torque Gross (SAE J1995)
1729 N·m
1275 ft·lbf
2141 N·m
1579 ft·lbf
1830 N·m
1350 ft·lbf
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV
Cat® C9.3
Cat® C9.3
-
-
No Engine De-rating Below
914 m
3000 ft
3810 m
12500 ft
3990 m
13100 ft
Peak Engine Torque Net (SAE J1349)
1712 N·m
1263 ft·lbf
2120 N·m
1564 ft·lbf
-
Peak Engine Torque Speed
1200 r/min
1200 r/min
1200 r/min
1200 r/min
1200 r/min
1200 r/min
Note (1)
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Emissions
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
The 730 meets Tier 4 Final and Stage V emission standards.
The 730 meets Tier 4 Final and Stage V emission standards.
The 730 EJ meets either Tier 2/Stage II or Tier 3/Stage IIIA equivalent emission standards.
The 730 EJ meets either Tier 2/Stage II or Tier 3/Stage IIIA equivalent emission standards.
Note (3)
Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions.
Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions.
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Net power when the fan is at maximum speed is 274 kW (367 hp) per the SAE reference conditions.
Net power when the fan is at maximum speed is 274 kW (367 hp) per the SAE reference conditions.
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (4)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
-
Net Power - ISO 14396
-
276 kW
370 HP
276 kW
370 HP
Gross Power - SAE J1995
-
280 kW
375 HP
280 kW
375 HP
Net Power - SAE J1349
-
274 kW
367 HP
274 kW
367 HP
Engine Model - U.S. EPA Tier 4 Final/EU Stage V
-
Cat C13
Cat C13
-
Note (5)
-
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
-
Engine Model - Either U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage IIIA equivalent
-
-
Cat C13
Cat C13
Peak Engine Torque Net (ISO 14396)
-
-
1810 N·m
1335 ft·lbf
Weights
Rated Payload
24 t
26.5 ton (US)
28 t
31 ton (US)
27.1 t
30 ton (US)
Body Capacities
Heaped (SAE 2:1)
15 m³
19.6 yd³
17.5 m³
23 yd³
16.9 m³
22.1 yd³
Struck
11 m³
14.4 yd³
13.3 m³
17.4 yd³
13.5 m³
17.7 yd³
Tailgate Heaped SAE 2:1
15.6 m³
20.4 yd³
18.8 m³
24.6 yd³
-
Tailgate Struck
11.1 m³
14.5 yd³
13.9 m³
18.2 yd³
-
Transmission
Forward - 1
8.1 km/h
5 mT/hr
8 km/h
5 mile/h
8 km/h
5 mile/h
Forward - 2
15.2 km/h
9.4 mT/hr
15 km/h
9 mile/h
15 km/h
9 mile/h
Forward - 3
23.2 km/h
14.4 mT/hr
22 km/h
14 mile/h
22 km/h
14 mile/h
Forward - 4
35.5 km/h
22.1 mT/hr
34 km/h
21 mile/h
34 km/h
21 mile/h
Forward - 5
49.4 km/h
30.7 mT/hr
47 km/h
29 mile/h
47 km/h
29 mile/h
Forward - 6
58.4 km/h
36.3 mT/hr
55 km/h
34 mile/h
55 km/h
34 mile/h
Reverse - 1
8.9 km/h
5.5 mT/hr
9 km/h
6 mile/h
9 km/h
6 mile/h
Sound Levels
Interior Cab
69 dB(A)
69 dB(A)
72 dB(A)
72 dB(A)
72 dB(A)
72 dB(A)
Note (1)
The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Operating Weights
Total - Loaded
47122 kg
103886 lb
51900 kg
114420 lb
53310 kg
117528 lb
Rear Axle - Rated Load
10750 kg
23699 lb
12360 kg
27249 lb
13225 kg
29156 lb
Total - Empty
23122 kg
50975 lb
23900 kg
52690 lb
26210 kg
57783 lb
Total - Rated Load
24000 kg
52910 lb
28000 kg
61729 lb
27100 kg
59745 lb
Center Axle - Loaded
15397 kg
33944 lb
16920 kg
37302 lb
18825 kg
41502 lb
Front Axle - Rated Load
2500 kg
5511 lb
3280 kg
7231 lb
650 kg
1433 lb
Center Axle - Rated Load
10750 kg
23699 lb
12360 kg
27249 lb
13225 kg
29156 lb
Center Axle - Empty
4646 kg
10242 lb
4560 kg
10053 lb
5600 kg
12346 lb
Rear Axle - Loaded
15176 kg
33457 lb
16700 kg
36817 lb
18605 kg
41017 lb
Front Axle - Loaded
16549 kg
36484 lb
18280 kg
40300 lb
15880 kg
35009 lb
Rear Axle - Empty
4426 kg
9757 lb
4340 kg
9568 lb
5380 kg
11861 lb
Front Axle - Empty
14050 kg
30974 lb
15000 kg
33069 lb
15230 kg
33576 lb
Body Plate Thickness
Side Plates
11 mm
0.43 in
11 mm
0.43 in
Front Plate
7 mm
0.28 in
7 mm
0.28 in
Base Plate
13 mm
0.51 in
13 mm
0.51 in
Service Refill Capacities
Fuel Tank
412 l
91 gal (US)
412 l
108.8 gal (US)
412 l
108.8 gal (US)
Cooling System
83 l
18 gal (US)
83 l
21.9 gal (US)
83 l
21.9 gal (US)
Hydraulic System
110 l
29.1 gal (US)
110 l
29.1 gal (US)
110 l
29.1 gal (US)
Engine Crankcase
38 l
8 gal (US)
38 l
10 gal (US)
38 l
10 gal (US)
Transmission
47 l
10 gal (US)
47 l
12.4 gal (US)
47 l
12.4 gal (US)
Final Drives/Differential
125 l
33 gal (US)
125 l
33 gal (US)
125 l
33 gal (US)
Output Transfer Gear Box
24 l
5 gal (US)
24 l
6.3 gal (US)
24 l
6.3 gal (US)
Steering/Hoist Hydraulic System
110 l
24 gal (US)
-
-
Final Drive - Each
7.5 l
1.6 gal (US)
-
-
DEF Tank
-
20 l
5.3 gal (US)
-
Body Hoist
Raise Time
10 s
10 s
12 s
12 s
Lower Time
8 s
8 s
8 s
8 s
Steering
Lock to Lock
4.75 seconds @ 60 rpm
4.75 seconds @ 60 rpm
4.75 seconds @ 60 rpm
4.75 seconds @ 60 rpm
4.75 seconds @ 60 rpm
4.75 seconds @ 60 rpm
Standards
Brakes
ISO 3450 – 2011
ISO 3450 – 2011
ISO 3450 – 2011
ISO 3450 – 2011
ISO 3450 – 2011
ISO 3450 – 2011
Cab - FOPS
ISO 3449 Level II – 2008
ISO 3449 Level II – 2008
ISO 3449 Level II – 2005
ISO 3449 Level II – 2005
ISO 3449 Level II – 2005
ISO 3449 Level II – 2005
Cab - ROPS
ISO 3471 – 2008
ISO 3471 – 2008
ISO 3471 – 2008
ISO 3471 – 2008
ISO 3471 – 2008
ISO 3471 – 2008
Steering
ISO 5010 – 2007
ISO 5010 – 2007
ISO 5010 – 2007
ISO 5010 – 2007
ISO 5010 – 2007
ISO 5010 – 2007
Body Plate
Type
High strength Brinell HB450 wear resistant steel
High strength Brinell HB450 wear resistant steel
High strength Brinell HB450 wear resistant steel
High strength Brinell HB450 wear resistant steel
High strength Brinell HB450 wear resistant steel
High strength Brinell HB450 wear resistant steel
Turning Circle
Turning Dimensions - Inside Radius
3879 mm
153 in
3879 mm
153 in
3849 mm
152 in
Turning Dimensions - Aisle Width
5332 mm
210 in
5332 mm
210 in
5424 mm
214 in
Turning Dimensions - SAE Turning Radius
7470 mm
294 in
7470 mm
294 in
7470 mm
294 in
Turning Dimensions - Clearance Radius
8075 mm
318 in
8075 mm
318 in
8075 mm
318 in
Turning Dimensions - Steer Angle - Left/Right
45°
45°
45°
45°
45°
45°
Note
Dimensions are for machines equipped with 23.5R25 tires.
Dimensions are for machines equipped with 23.5R25 tires.
Dimensions are for machines equipped with 23.5R25 tires.
Dimensions are for machines equipped with 23.5R25 tires.
Dimensions are for machines equipped with 750/65 R25 tires.
Dimensions are for machines equipped with 750/65 R25 tires.
Optimal Loader/Truck Pass Matching
Wheel Loader: 950M - Passes
5
5
5
5
5
5
Wheel Loader: 962M - Passes
4-5
4-5
4–5
4–5
4–5
4–5
Wheel Loaders: 966M/966M XE - Passes
4
4
4
4
4
4
Hydraulic Excavators: 336F/336F XE - Passes
5-6
5-6
5–6
5–6
5–6
5–6
Wheel Loaders: 972M/972M XE - Passes
3-4
3-4
3–4
3–4
3–4
3–4
Hydraulic Excavators: 349F/349F XE - Passes
4-5
4-5
4–5
4–5
4–5
4–5
Note
-
An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
An optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
An optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Eject/Retract Times
Eject Time
12 s
12 s
Retract Time
15 s
15 s