Hydraulic Mining Shovels

Compare Models

6040/6040 FS
UNITS:
Metric
Imperial
Engine Output - SAE J1995
1516 kW
2032 HP
 
1880 kW
2520 HP
 
2256 kW
3023 HP
Bucket Payload
39.6 t
43.7 ton (US)
 
50.4 t
55.6 ton (US)
 
61 t
67 ton (US)
Operating Weight
407.3 t
449 ton (US)
 
537 t
591.9 ton (US)
 
599 t
660 ton (US)
Note
Specifications above apply to Backhoe configuration. Face Shovel and Frontless configurations are also available.
Specifications above apply to Backhoe configuration. Face Shovel and Frontless configurations are also available.
 
Specifications above apply to Backhoe configuration. Face Shovel and Frontless configurations are also available.
Specifications above apply to Backhoe configuration. Face Shovel and Frontless configurations are also available.
 
Specifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available.
Specifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available.
Hydraulic Tank Capacity - AC Version - Approximately
4000 l
1057 gal (US)
 
5000 l
1320 gal (US)
 
-
Maximum Pressure - Swing Pumps
350 bar
5080 psi
 
350 bar
5080 psi
 
350 bar
5075 psi
Swing Pumps - Maximum Oil Flow - AC Version
3 × 491 L/min (3 × 130 gal/min)
3 × 491 L/min (3 × 130 gal/min)
 
3 × 491 L/min (3 × 131 gal/min)
3 × 491 L/min (3 × 131 gal/min)
 
-
Main Pumps - Diesel Version
4 × variable swash plate pumps
4 × variable swash plate pumps
 
-
 
8 variable swash plate pumps
8 variable swash plate pumps
Main Pumps - AC Version
4 × variable flow axial piston pumps
4 × variable flow axial piston pumps
 
-
 
-
Maximum Pressure - Travel
350 bar
5080 psi
 
340 bar
4930 psi
 
360 bar
5220 psi
Hydraulic Tank Capacity - Diesel Version - Approximately
3400 l
898 gal (US)
 
5500 l
1450 gal (US)
 
-
Maximum Pressure - Attachment
300 bar
4350 psi
 
300 bar
4350 psi
 
320 bar
4640 psi
Swing Pumps - Maximum Oil Flow - Diesel Version
4 × 321 L/min (4 × 85 gal/min)
4 × 321 L/min (4 × 85 gal/min)
 
4 × 351 L/min (4 × 93 gal/min)
4 × 351 L/min (4 × 93 gal/min)
 
4 x 352 L/min (4 x 93 gal/min)
4 x 352 L/min (4 x 93 gal/min)
Total Volume of Hydraulic Oil - AC Version - Approximately
6400 l
1585 gal (US)
 
7300 l
1930 gal (US)
 
-
Total Volume of Hydraulic Oil - Diesel Version - Approximately
5800 l
1532 gal (US)
 
7800 l
2060 gal (US)
 
-
Swing Pumps - AC Version
3 × reversible swash plate pump
3 × reversible swash plate pump
 
3 × reversible swash plate pumps
3 × reversible swash plate pumps
 
-
Main Pumps - Maximum Oil Flow - AC Version
4 × 746 L/min (4 × 197 gal/min)
4 × 746 L/min (4 × 197 gal/min)
 
4 × 933 L/min (4 × 246 gal/min)
4 × 933 L/min (4 × 246 gal/min)
 
-
Swing Pumps - Diesel Version
4 × reversible swash plate pump
4 × reversible swash plate pump
 
4 × reversible swash plate pumps
4 × reversible swash plate pumps
 
4 reversible swash plate pumps
4 reversible swash plate pumps
Main Pumps - Maximum Oil Flow - Diesel Version
4 × 724 L/min (4 × 191 gal/min)
4 × 724 L/min (4 × 191 gal/min)
 
4 × 912 L/min (4 × 241 gal/min)
4 × 912 L/min (4 × 241 gal/min)
 
8 x 650 L/min (8 x 172 gal/min)
8 x 650 L/min (8 x 172 gal/min)
Main Pumps
-
 
4 × variable flow axial piston pumps
4 × variable flow axial piston pumps
 
-
Features (1)
Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
 
Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
 
Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
Components (1)
Gear type cooling pumps supplying high-volume, low-pressure oil to aluminum coolers
Gear type cooling pumps supplying high-volume, low-pressure oil to aluminum coolers
 
-
 
-
Oil Flow of Cooling Pumps - AC Version
4 × 379 L/min (4 × 100 gal/min)
4 × 379 L/min (4 × 100 gal/min)
 
4 × 491 L/min (4 × 130 gal/min)
4 × 491 L/min (4 × 130 gal/min)
 
-
Features (2)
Fan speed is thermostatically controlled
Fan speed is thermostatically controlled
 
Fan speed and flow of oil to the coolers are thermostatically controlled
Fan speed and flow of oil to the coolers are thermostatically controlled
 
Fan speed and flow of oil to the coolers are thermostatically controlled
Fan speed and flow of oil to the coolers are thermostatically controlled
Components (2)
Variable axial piston pumps supplying low-volume, high-pressure oil to fans
Variable axial piston pumps supplying low-volume, high-pressure oil to fans
 
-
 
-
Diameter - Fan
2 × 1524 mm (2 × 60 in)
2 × 1524 mm (2 × 60 in)
 
4 × 1170 mm (4 × 46 in)
4 × 1170 mm (4 × 46 in)
 
1170 mm
46 in
Oil Flow of Cooling Pumps - Diesel Version
2 × 799 L/min (2 × 211 gal/min)
2 × 799 L/min (2 × 211 gal/min)
 
4 × 488 L/min (4 × 129 gal/min)
4 × 488 L/min (4 × 129 gal/min)
 
-
Features (3)
Extremely high cooling efficiency to ensure optimum oil temperature
Extremely high cooling efficiency to ensure optimum oil temperature
 
Extremely high cooling efficiency to ensure optimum oil temperature
Extremely high cooling efficiency to ensure optimum oil temperature
 
Extremely high cooling efficiency to ensure optimum oil temperature
Extremely high cooling efficiency to ensure optimum oil temperature
Components
-
 
Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
 
4 cooling fans
4 cooling fans
Oil Flow of Cooling Pumps
-
 
-
 
4 x 488 L/min (4 x 129 gal/min)
4 x 488 L/min (4 x 129 gal/min)
Features (4)
-
 
-
 
Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
Board Control System (BCS III) Features (6)
Graphic charts of logged data
Graphic charts of logged data
 
-
 
-
Components (4)
Windshield with parallel intermittent wiper/washer
Windshield with parallel intermittent wiper/washer
 
All-round safety glass, armored windshield and sliding side window
All-round safety glass, armored windshield and sliding side window
 
Independently adjustable seat consoles with integrated joysticks
Independently adjustable seat consoles with integrated joysticks
Board Control System (BCS III) Features (1)
USB, Lan (TCP/IP) and CAN BUS interfaces for data export
USB, Lan (TCP/IP) and CAN BUS interfaces for data export
 
-
 
-
Components (5)
All-round safety glass, armored windshield and sliding side window
All-round safety glass, armored windshield and sliding side window
 
FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure
FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure
 
Operator Protective Guard (Top Guard) (ISO 10262:1998)
Operator Protective Guard (Top Guard) (ISO 10262:1998)
Components (7)
Under roof mounted heating ventilating and air conditioning system
Under roof mounted heating ventilating and air conditioning system
 
External sun shields at side and rear windows
External sun shields at side and rear windows
 
Additional fold-away auxiliary seat with safety belt
Additional fold-away auxiliary seat with safety belt
Board Control System (BCS III) Features (5)
On-screen troubleshooting assistance
On-screen troubleshooting assistance
 
-
 
-
Board Control System (BCS III) Features (3)
Robust instrument panel including large (12 in) colored touch screen for intuitive handling
Robust instrument panel including large (12 in) colored touch screen for intuitive handling
 
-
 
-
Internal Dimensions of Cab - Height
2150 mm
7.05 ft
 
-
 
2070 mm
6.75 ft
Components (11)
Sliding emergency ladder (kick-down type) with ladder cage
Sliding emergency ladder (kick-down type) with ladder cage
 
Emergency rescue seat
Emergency rescue seat
 
Emergency egress ladder
Emergency egress ladder
Internal Dimensions of Cab - Width
1600 mm
5.25 ft
 
-
 
1625 mm
5.33 ft
Components (10)
External sun shields at side and rear windows
External sun shields at side and rear windows
 
Robust instrument panel including large colored BCS screen with transflective technology
Robust instrument panel including large colored BCS screen with transflective technology
 
Powered 45 degree access stairway
Powered 45 degree access stairway
Components (3)
Roller blinds at all windows
Roller blinds at all windows
 
Windshield with parallel intermittent wiper/washer
Windshield with parallel intermittent wiper/washer
 
Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support
Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support
Operator's Eye Level - Approximately
6.8 m
22.31 ft
 
7.6 m
24.93 ft
 
7.6 m
24.91 ft
Components (1)
Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
 
Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head and armrests
Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head and armrests
 
Single hydraulically driven HVAC System, with dual system option
Single hydraulically driven HVAC System, with dual system option
Components (2)
Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests
Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests
 
Under roof mounted heating ventilating and air conditioning system
Under roof mounted heating ventilating and air conditioning system
 
In-floor window with removable grate
In-floor window with removable grate
Board Control System (BCS III) Features (7)
Fault memory with storage of related conditions
Fault memory with storage of related conditions
 
-
 
-
Internal Dimensions of Cab - Length
2200 mm
7.22 ft
 
-
 
2230 mm
7.33 ft
Components (6)
FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure
FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure
 
Fold-away auxiliary seat with safety belt
Fold-away auxiliary seat with safety belt
 
Elevated full-size trainer seat with safety belt and laptop desk
Elevated full-size trainer seat with safety belt and laptop desk
Components (9)
Fold-away auxiliary seat with safety belt
Fold-away auxiliary seat with safety belt
 
Joystick controls integrated in independently adjustable seat consoles
Joystick controls integrated in independently adjustable seat consoles
 
Monitoring system with 254 mm (10 in) touch screen
Monitoring system with 254 mm (10 in) touch screen
Components (12)
Machine access via retractable access stairway, stairway angle approximately 45°, hydraulically operated
Machine access via retractable access stairway, stairway angle approximately 45°, hydraulically operated
 
Emergency ladder mounted to the A-frame
Emergency ladder mounted to the A-frame
 
FM/AM radio with USB and AUX input
FM/AM radio with USB and AUX input
Board Control System (BCS III) Features (2)
On-screen PDF documentation (e.g. operating instructions, technical handbook, spare parts catalog, electric circuit diagram)
On-screen PDF documentation (e.g. operating instructions, technical handbook, spare parts catalog, electric circuit diagram)
 
-
 
-
Components (8)
Joystick controls integrated in independently adjustable seat consoles
Joystick controls integrated in independently adjustable seat consoles
 
Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
 
Operator Presence switch
Operator Presence switch
Board Control System (BCS III) Features (4)
Electronic monitoring, data logging & diagnostic system for vital signs & service data of engines, hydraulic & lube systems
Electronic monitoring, data logging & diagnostic system for vital signs & service data of engines, hydraulic & lube systems
 
-
 
-
Components (13)
Robust instrument panel including large colored BCS screen with transflective technology
Robust instrument panel including large colored BCS screen with transflective technology
 
Machine access via retractable boarding ladder, hydraulically operated
Machine access via retractable boarding ladder, hydraulically operated
 
Roller blinds on 3 front windows
Roller blinds on 3 front windows
Internal Dimensions - Height
-
 
2150 mm
7.05 ft
 
-
Internal Dimensions - Length
-
 
2200 mm
7.22 ft
 
-
Components (14)
-
 
Roller blinds at all windows
Roller blinds at all windows
 
3 cup holders
3 cup holders
Board Control System (BCS) Features
-
 
Electronic monitoring & data logging system for vital signs & service data of engines, hydraulic systems & lubrication systems
Electronic monitoring & data logging system for vital signs & service data of engines, hydraulic systems & lubrication systems
 
-
Internal Dimensions - Width
-
 
1600 mm
5.25 ft
 
-
Components (15)
-
 
-
 
Cat Electronic Technician service port
Cat Electronic Technician service port
Features (4)
All raceways and the internal gearing of swing ring supplied by automatic central lubrication system
All raceways and the internal gearing of swing ring supplied by automatic central lubrication system
 
All raceways and the internal gearing of swing ring supplied by automatic central lubrication system
All raceways and the internal gearing of swing ring supplied by automatic central lubrication system
 
All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system
All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system
Features (1)
Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
 
Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
 
Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
Swing Ring
Triple-race roller bearing with sealed internal gearing
Triple-race roller bearing with sealed internal gearing
 
Triple-race roller bearing with sealed internal gearing
Triple-race roller bearing with sealed internal gearing
 
Triple-race roller bearing with sealed internal gearing
Triple-race roller bearing with sealed internal gearing
Maximum Swing Speed - Diesel Version
4.7 r/min
4.7 r/min
 
3.8 r/min
3.8 r/min
 
-
Swing Drive
3 compact planetary transmissions with axial piston motors
3 compact planetary transmissions with axial piston motors
 
4 compact planetary transmissions with axial piston motors
4 compact planetary transmissions with axial piston motors
 
4 compact planetary transmissions with axial piston motors
4 compact planetary transmissions with axial piston motors
Maximum Swing Speed - AC Version
5.1 r/min
5.1 r/min
 
4 r/min
4 r/min
 
-
Parking Brake
Wet multiple disc brake, spring-loaded/hydraulically released
Wet multiple disc brake, spring-loaded/hydraulically released
 
-
 
-
Features (3)
Hydraulic braking of the swing motion by counteracting control
Hydraulic braking of the swing motion by counteracting control
 
Hydraulic braking of the swing motion by counteracting control
Hydraulic braking of the swing motion by counteracting control
 
Hydraulic braking of the swing motion by counteracting control
Hydraulic braking of the swing motion by counteracting control
Features (2)
Closed-loop swing circuit with torque control
Closed-loop swing circuit with torque control
 
Closed-loop swing circuit with torque control
Closed-loop swing circuit with torque control
 
Closed-loop swing circuit with torque control
Closed-loop swing circuit with torque control
Parking Brakes
-
 
Wet multiple disc brake, spring-loaded/hydraulically released
Wet multiple disc brake, spring-loaded/hydraulically released
 
Wet multiple disc brake, spring loaded/hydraulically released
Wet multiple disc brake, spring loaded/hydraulically released
Maximum Swing Speed
-
 
-
 
3.8 r/min
3.8 r/min
Components (6)
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
 
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
 
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
Gradeability - Travel Drives - Maximum
57 %
57 %
 
50 %
50 %
 
39 %
39 %
Components (5)
Fully hydraulic self-adjusting track tensioning system with membrane accumulator
Fully hydraulic self-adjusting track tensioning system with membrane accumulator
 
Fully hydraulic, self-adjusting track tensioning system with membrane accumulator
Fully hydraulic, self-adjusting track tensioning system with membrane accumulator
 
Fully hydraulic, self-adjusting track tensioning system with piston accumulator
Fully hydraulic, self-adjusting track tensioning system with piston accumulator
Components (1)
All running surfaces of sprockets, idlers, rollers and track links are hardened
All running surfaces of sprockets, idlers, rollers and track links are hardened
 
All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened
All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened
 
HD tracks with cast double-grouser track pad
HD tracks with cast double-grouser track pad
Track Pads - Each Side
42
42
 
39
39
 
42
42
Components (4)
All teeth contact areas of sprocket and pad links are hardened
All teeth contact areas of sprocket and pad links are hardened
 
Bottom rollers are connected to the automatic lubrication system
Bottom rollers are connected to the automatic lubrication system
 
Acoustic travel alarm (forward and reverse)
Acoustic travel alarm (forward and reverse)
Travel Speed - 1st Stage - Maximum
1.5 km/h
0.93 mile/h
 
1.6 km/h
0.99 mile/h
 
1.1 km/h
0.68 mile/h
Travel Speed - 2nd Stage - Maximum
2.5 km/h
1.55 mile/h
 
2.3 km/h
1.44 mile/h
 
1.6 km/h
0.99 mile/h
Bottom Rollers - Each Side
7
7
 
6
6
 
7
7
Travel Drives - Each Side
1 planetary transmission with 2 two-stage axial piston motors
1 planetary transmission with 2 two-stage axial piston motors
 
1 planetary transmission with 2 two-stage axial piston motors
1 planetary transmission with 2 two-stage axial piston motors
 
1 planetary transmission with 2 two-stage axial piston motors
1 planetary transmission with 2 two-stage axial piston motors
Maximum Tractive Force
2097 kN
471260 lb
 
2576 kN
578900 lb
 
2942 kN
661160 lb
Components (2)
Acoustic travel alarm
Acoustic travel alarm
 
Acoustic travel alarm
Acoustic travel alarm
 
HD fixed axle rollers and idlers
HD fixed axle rollers and idlers
Parking Brake
Wet multiple disc brake, spring applied/hydraulically released
Wet multiple disc brake, spring applied/hydraulically released
 
-
 
-
Support Rollers - Each Side
2 plus a skid plate in between
2 plus a skid plate in between
 
2 plus a skid plate in between
2 plus a skid plate in between
 
2 plus a skid plate in between
2 plus a skid plate in between
Components (3)
Cast double-grouser combined pad-links with bushings connected by hardened full floating pins
Cast double-grouser combined pad-links with bushings connected by hardened full floating pins
 
Cast double-grouser combined pad links with bushings connected by hardened full floating pins
Cast double-grouser combined pad links with bushings connected by hardened full floating pins
 
Hardened running surfaces of sprockets, idlers, rollers, pad links, and teeth contact areas
Hardened running surfaces of sprockets, idlers, rollers, pad links, and teeth contact areas
Parking Brakes
-
 
Wet multiple disc brake, spring-applied/hydraulically released
Wet multiple disc brake, spring-applied/hydraulically released
 
-
Type (2)
System failures displayed by Board Control System
System failures displayed by Board Control System
 
System failures displayed by Board Control System
System failures displayed by Board Control System
 
System failures displayed by monitoring system
System failures displayed by monitoring system
Type (4)
Connected to the lubrication system are: - pivot points of attachment, bucket and cylinders
Connected to the lubrication system are: - pivot points of attachment, bucket and cylinders
 
Connected to the lube system are: - pivot points of attachment, bucket and cylinders - bottom rollers of undercarriage
Connected to the lube system are: - pivot points of attachment, bucket and cylinders - bottom rollers of undercarriage
 
Main lube system connections include: pivot points of attachment, bucket and cylinders, raceways of swing roller bearing, and 2 greasing pinions for the internal gearing of swing ring
Main lube system connections include: pivot points of attachment, bucket and cylinders, raceways of swing roller bearing, and 2 greasing pinions for the internal gearing of swing ring
Capacity - Grease Container
1000 l
264 gal (US)
 
1000 l
264 gal (US)
 
710 l
188 gal (US)
Type (5)
Connected to the lubrication system are: - raceways of the swing roller bearing - two greasing pinions for the internal gearing of the swing ring
Connected to the lubrication system are: - raceways of the swing roller bearing - two greasing pinions for the internal gearing of the swing ring
 
Connected to the lube system are: - raceways of the swing roller bearing - two greasing pinions for the internal gearing of the swing ring
Connected to the lube system are: - raceways of the swing roller bearing - two greasing pinions for the internal gearing of the swing ring
 
-
Type (1)
Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control adjust the pause/lube times
Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control adjust the pause/lube times
 
Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times
Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times
 
Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times
Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times
Type (3)
Grease filters (200 μm) between service station and container, as well as directly behind grease pump
Grease filters (200 μm) between service station and container, as well as directly behind grease pump
 
Grease filters (200 μm) between service station and container, as well as directly behind grease pump
Grease filters (200 μm) between service station and container, as well as directly behind grease pump
 
Grease filters (200 µm) between service station and container as well as directly behind grease pump
Grease filters (200 µm) between service station and container as well as directly behind grease pump
6040 FS - Ground Pressure
24.1 N/cm2 (35.0 psi)
24.1 N/cm2 (35.0 psi)
 
-
 
-
6040 - Ground Pressure
24.3 N/cm2 (35.3 psi)
24.3 N/cm2 (35.3 psi)
 
-
 
-
6040 - Note
Other track pads available on request
Other track pads available on request
 
-
 
-
6040 - Operating Weight
407300 kg
897930 lb
 
-
 
-
6040 FS - Operating Weight
404600 kg
891980 lb
 
-
 
-
6040 FS - Note
Other track pads available on request
Other track pads available on request
 
-
 
-
6040 FS - Standard Track Pads
1200 mm
3.9 ft
 
-
 
-
6040 - Standard Track Pads
1200 mm
3.9 ft
 
-
 
-
6050 - Standard Track Pads
-
 
1400 mm
4.59 ft
 
-
6050 FS - Ground Pressure
-
 
25.9 N/cm2 (37.5 psi)
25.9 N/cm2 (37.5 psi)
 
-
6050 FS - Operating Weight
-
 
527600 kg
1163150 lb
 
-
6050 - Operating Weight
-
 
537000 kg
1183870 lb
 
-
6050 - Note
-
 
Other track pads available on request
Other track pads available on request
 
-
6050 FS - Standard Track Pads
-
 
1400 mm
4.59 ft
 
-
6050 - Ground Pressure
-
 
26.3 N/cm2 (38.1 psi)
26.3 N/cm2 (38.1 psi)
 
-
6050 FS - Note
-
 
Other track pads available on request
Other track pads available on request
 
-
6060 FS - Standard Track Pads
-
 
-
 
1400 mm
4.58 ft
6060 FS - Operating Weight
-
 
-
 
598800 kg
1320110 lb
6060 FS - Ground Pressure
-
 
-
 
26.6 N/cm2 (38.5 psi)
26.6 N/cm2 (38.5 psi)
Backhoe - Standard Track Tads
-
 
-
 
1400 mm
4.58 ft
Backhoe - Operating Weight
-
 
-
 
600500 kg
1323860 lb
Backhoe - Ground Pressure
-
 
-
 
26.7 N/cm2 (38.7 psi)
26.7 N/cm2 (38.7 psi)
Note
-
 
-
 
Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants.
Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants.
Batteries in Series/Parallel Installation
6 × 210 Ah - 12V each; 630 Ah - 24V in total
6 × 210 Ah - 12V each; 630 Ah - 24V in total
 
6 × 210 Ah - 12V each; 630 Ah - 24V in total
6 × 210 Ah - 12V each; 630 Ah - 24V in total
Components (4)
10 LED high-brightness working flood lights - 8 for working area - 2 for rear end
10 LED high-brightness working flood lights - 8 for working area - 2 for rear end
 
Ten (10) LED high-brightness working flood lights - Eight (8) for working area - Two (2) for rear end
Ten (10) LED high-brightness working flood lights - Eight (8) for working area - Two (2) for rear end
Components (1)
13 LED service lights
13 LED service lights
 
Thirteen (13) LED service lights
Thirteen (13) LED service lights
Components (2)
Battery isolation relays and switches
Battery isolation relays and switches
 
Battery isolation relays
Battery isolation relays
Components (5)
2 LED high-brightness access flood lights
2 LED high-brightness access flood lights
 
Two (2) LED high-brightness access flood lights
Two (2) LED high-brightness access flood lights
Components (3)
Emergency stop switches accessible from ground level, in engine module and in operator's cab
Emergency stop switches accessible from ground level, in engine module and in operator's cab
 
Emergency stop switches accessible from ground level, in engine module and in operator's cab
Emergency stop switches accessible from ground level, in engine module and in operator's cab
System Voltage
24V
24V
 
24V
24V
Alternators
-
 
2 × 175A each
2 × 175A each
Installation
Retractable service station installed underneath the engine module and easily accessible from ground
Retractable service station installed underneath the engine module and easily accessible from ground
 
Retractable service station installed underneath the engine module and easily accessible from ground.
Retractable service station installed underneath the engine module and easily accessible from ground.
 
Retractable service station installed underneath the engine module and easily accessible from ground.
Retractable service station installed underneath the engine module and easily accessible from ground.
Equipped With (1)
-
 
-
 
Quick couplings for: Diesel fuel, Engine coolant - left/righ engine, Pump transmission gear oil - left/right engine, Engine oil - left/righ engine, Hydraulic oil tank, and grease container
Quick couplings for: Diesel fuel, Engine coolant - left/righ engine, Pump transmission gear oil - left/right engine, Engine oil - left/righ engine, Hydraulic oil tank, and grease container
Equipped With (2)
-
 
-
 
Cat jump-start socket
Cat jump-start socket
Equipped With (3)
-
 
-
 
Indicator lights
Indicator lights
All buckets (FS and BH) are equipped with a wear package consisting of: (2)
- Wing shrouds on side walls - Heel shrouds at bottom edges
- Wing shrouds on side walls - Heel shrouds at bottom edges
 
- Wing shrouds on side walls - Heel shrouds at bottom edges
- Wing shrouds on side walls - Heel shrouds at bottom edges
 
Wing shrouds on side walls and heel shrouds at bottom edges
Wing shrouds on side walls and heel shrouds at bottom edges
Type (8)
Guards for shovel cylinders (FS)
Guards for shovel cylinders (FS)
 
Special wear packages for highly abrasive materials on request
Special wear packages for highly abrasive materials on request
 
Special wear packages for highly abrasive materials available upon request
Special wear packages for highly abrasive materials available upon request
Type (1)
Inspection hole in monoboom BH
Inspection hole in monoboom BH
 
Inspection hole in booms
Inspection hole in booms
 
Catwalks with rails at booms (FS and BH)
Catwalks with rails at booms (FS and BH)
Type (2)
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
 
Catwalks with rails at booms
Catwalks with rails at booms
 
Guards for shovel cylinders (FS)
Guards for shovel cylinders (FS)
Shovel attachment with unique TriPower kinematics ensuring the following main features: (1)
- Automatic roll-back limiter to prevent material spillage - Kinematic assistance to hydraulic forces
- Automatic roll-back limiter to prevent material spillage - Kinematic assistance to hydraulic forces
 
- Automatic roll-back limiter to prevent material spillage - Kinematic assistance to hydraulic forces
- Automatic roll-back limiter to prevent material spillage - Kinematic assistance to hydraulic forces
 
Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces
Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces
Type (7)
Boom and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel casting at pivot areas
Boom and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel casting at pivot areas
 
Booms and sticks are torsion-resistant, welded box design of high tensile steel with massive steel castings at pivot areas
Booms and sticks are torsion-resistant, welded box design of high tensile steel with massive steel castings at pivot areas
 
Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas
Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas
Type (5)
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
 
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
 
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Type (3)
Special wear packages for highly abrasive materials on request
Special wear packages for highly abrasive materials on request
 
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
 
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
Type (6)
Boom and sticks are stress-relieved after welding
Boom and sticks are stress-relieved after welding
 
Booms and sticks are stress-relieved after welding
Booms and sticks are stress-relieved after welding
 
Booms and sticks are stress-relieved after welding
Booms and sticks are stress-relieved after welding
Shovel attachment with unique TriPower kinematics ensuring the following main features: (3)
- Constant boom momentum throughout the whole lift arc - Crowd force assistance
- Constant boom momentum throughout the whole lift arc - Crowd force assistance
 
- Constant boom momentum throughout the entire lift arc - Crowd force assistance
- Constant boom momentum throughout the entire lift arc - Crowd force assistance
 
Constant boom momentum throughout the entire lift arc; Crowd force assistance
Constant boom momentum throughout the entire lift arc; Crowd force assistance
All buckets (FS and BH) are equipped with a wear package consisting of: (1)
- Special liner material covering main wear areas inside and outside of bucket - Lip shrouds between teeth
- Special liner material covering main wear areas inside and outside of bucket - Lip shrouds between teeth
 
- Special liner material covering main wear areas inside and outside of bucket - Lip shrouds between teeth
- Special liner material covering main wear areas inside and outside of bucket - Lip shrouds between teeth
 
Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth
Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth
Shovel attachment with unique TriPower kinematics ensuring the following main features: (2)
- Horizontal automatic constant-angle bucket guidance - Vertical automatic constant-angle bucket guidance
- Horizontal automatic constant-angle bucket guidance - Vertical automatic constant-angle bucket guidance
 
- Horizontal automatic constant-angle bucket guidance - Vertical automatic constant-angle bucket guidance
- Horizontal automatic constant-angle bucket guidance - Vertical automatic constant-angle bucket guidance
 
Horizontal Automatic constant-angle bucket guidance; Vertical Automatic constant-angle bucket guidance
Horizontal Automatic constant-angle bucket guidance; Vertical Automatic constant-angle bucket guidance
Type (4)
Catwalks with rails at boom (FS and BH)
Catwalks with rails at boom (FS and BH)
 
Guards for shovel cylinders (FS)
Guards for shovel cylinders (FS)
 
Service access holes from both sides in boom in booms (FS and BH) and stick (FS)
Service access holes from both sides in boom in booms (FS and BH) and stick (FS)
Maximum Altitude - Without Deration - At 10° C Above Sea Level
2500 m
8200 ft
 
-
Bore
145 mm
5.71 in
 
170 mm
6.69 in
Components (1)
Additional high-capacity water separator
Additional high-capacity water separator
 
Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs)
Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs)
Emissions
U.S. EPA flex
U.S. EPA flex
 
-
Fuel Tank Capacity
7800 l
2060 gal (US)
 
-
Total Rated Net Power - ISO 3046/1
1516 kW 1,750 min-1 (2,032 hp 1,750 min-1)
1516 kW 1,750 min-1 (2,032 hp 1,750 min-1)
 
-
Components (3)
Heavy-duty air filters
Heavy-duty air filters
 
Two-stage fuel filter with series filtration
Two-stage fuel filter with series filtration
Components (4)
Microprocessed engine management
Microprocessed engine management
 
Heavy-duty air filters
Heavy-duty air filters
Total Rated Gross Power - SAE J1995
1516 kW 1,750 min-1 (2,032 hp 1,750 min-1)
1516 kW 1,750 min-1 (2,032 hp 1,750 min-1)
 
-
Displacement
32.1 l
1959 in³
 
58.6 l
3574 in³
Alternators
2 × 150 A
2 × 150 A
 
-
Make/Model
2 × Cat C32 (Tier 2)
2 × Cat C32 (Tier 2)
 
-
Stroke
162 mm
6.38 in
 
215 mm
8.46 in
Number of Cylinders - Each Engine
12
12
 
12
12
Components (2)
Two-stage fuel filter including water separator
Two-stage fuel filter including water separator
 
High-capacity water separator
High-capacity water separator
Aspiration
Turbocharged and air-to-air aftercooled
Turbocharged and air-to-air aftercooled
 
Turbocharged and charge air-cooled
Turbocharged and charge air-cooled
Components (5)
Hydraulically driven radiator fan with electronically controlled fan speed
Hydraulically driven radiator fan with electronically controlled fan speed
 
Microprocessed engine management
Microprocessed engine management
Total Rated Net Power - SAE J1349
1516 kW 1,750 min-1 (2,032 hp 1,750 min-1)
1516 kW 1,750 min-1 (2,032 hp 1,750 min-1)
 
-
Rated Speed
-
 
1,800 min-1 (1,800 rpm)
1,800 min-1 (1,800 rpm)
Components (6)
-
 
Hydraulically driven radiator fan with electronically controlled fan speed
Hydraulically driven radiator fan with electronically controlled fan speed
Components (7)
-
 
Exhaust manifold and turbo heat shields
Exhaust manifold and turbo heat shields
Gross Power - SAE J1995
1516 kW
2032 HP
 
1880 kW
2520 HP
 
-
Note
Electric drive option available (1400 kW) on 6040 AC/6040 AC FS
Electric drive option available (1400 kW) on 6040 AC/6040 AC FS
 
Electric drive option available (1600 kW) on 6050 AC/6050 AC FS
Electric drive option available (1600 kW) on 6050 AC/6050 AC FS
 
-
Net Power - SAE J1349
1516 kW
2032 HP
 
1880 kW
2520 HP
 
-
Engine Model
2 × Cat® C32
2 × Cat® C32
 
2 × Cummins K1500E or 2 × Cummins QSK 38
2 × Cummins K1500E or 2 × Cummins QSK 38
 
2 x Cat 3512E
2 x Cat 3512E
Bucket Capacity - Face Shovel (heaped 2:1)
22 m³
28.8 yd³
 
26 m³
34 yd³
Bucket Capacity - Backhoe (heaped 1:1)
22 m³
28.8 yd³
 
28 m³
36.6 yd³
Operating Weight - Backhoe
407 t
449 t
 
537 t
592 t
Bucket Payload
40 t
44 t
 
-
Operating Weight - Face Shovel
405 t
446 t
 
528 t
582 t
Bucket Payload - Backhoe
-
 
50 t
55 t
Bucket Payload - Face Shovel
-
 
47 t
52 t
Voltage
6.6 kV ±10% (other on request)
6.6 kV ±10% (other on request)
Type (2)
Custom-made electric motor with increased gap between rotor and stator to withstand severe mining conditions
Custom-made electric motor with increased gap between rotor and stator to withstand severe mining conditions
Frequency
50 Hz (60 Hz on request)
50 Hz (60 Hz on request)
Rated Current IN
156 A (at 6.6 kV)
156 A (at 6.6 kV)
Output
1400 kW
1877 HP
Type (1)
Power limit control by Pump Managing System
Power limit control by Pump Managing System
Type (3)
Squirrel cage induction motor
Squirrel cage induction motor
Starting current
350% of IN (197% of IN Optional)
350% of IN (197% of IN Optional)
Revolutions
1,500 min-1 (1,800 min-1 at 60 Hz)
1,500 min-1 (1,800 min-1 at 60 Hz)
Total Rated Net Power - ISO 3046/1
1880 kW 1,800 min-1 (2,520 hp 1,800 min-1)
1880 kW 1,800 min-1 (2,520 hp 1,800 min-1)
Fuel Tank Capacity
10700 l
2820 gal (US)
Total Rated Gross Power - SAE J1995
1880 kW 1,800 min-1 (2,520 hp 1,800 min-1)
1880 kW 1,800 min-1 (2,520 hp 1,800 min-1)
Components (5)
Hydraulically driven radiator fan with electronically controlled fan speed
Hydraulically driven radiator fan with electronically controlled fan speed
Components (4)
Eliminator with centrifuge for engine oil filtration
Eliminator with centrifuge for engine oil filtration
Components (1)
Additional high-capacity water separator
Additional high-capacity water separator
Bore
159 mm
6.25 in
Number of Cylinders - Each Engine
12
12
Stroke
159 mm
6.25 in
Maximum Altitude - Without Deration - Above Sea Level
2438 m
8000 ft
Components (3)
Pre-lube starting system
Pre-lube starting system
Total Rated Net Power - SAE J1349
1880 kW 1,800 min-1 (2,520 hp 1,800 min-1)
1880 kW 1,800 min-1 (2,520 hp 1,800 min-1)
Displacement
37.8 l
2300 in³
Components (6)
Heavy-duty air filters with automatic dust evacuation
Heavy-duty air filters with automatic dust evacuation
Components (7)
Microprocessed engine control
Microprocessed engine control
Emissions
U.S. EPA Flex
U.S. EPA Flex
Make/Model
2 × Cummins K1500E
2 × Cummins K1500E
Aspiration
Turbocharged and aftercooled
Turbocharged and aftercooled
Components (2)
Two-stage fuel filter including water separator
Two-stage fuel filter including water separator
Maximum Altitude - Without Deration - Above Sea Level
3200 m
10500 ft
Make/Model
2 × Cummins QSK38
2 × Cummins QSK38
Components (6)
Heavy-duty air filters with automatic dust evacuation
Heavy-duty air filters with automatic dust evacuation
Total Rated Net Power - ISO 3046/1
1880 kW 1,800 min-1 (2,520 hp 1,800 min-1)
1880 kW 1,800 min-1 (2,520 hp 1,800 min-1)
Emissions
U.S. EPA Flex
U.S. EPA Flex
Fuel Tank Capacity
10700 l
2820 gal (US)
Total Rated Net Power - SAE J1349
1880 kW 1,800 min-1 (2,520 hp 1,800 min-1)
1880 kW 1,800 min-1 (2,520 hp 1,800 min-1)
Components (4)
Pre-lube starting system
Pre-lube starting system
Total Rated Gross Power - SAE J1995
1880 kW 1,800 min-1 (2,520 hp 1,800 min-1)
1880 kW 1,800 min-1 (2,520 hp 1,800 min-1)
Components (7)
Two-stage fuel filter including water separator
Two-stage fuel filter including water separator
Aspiration
Turbocharged and aftercooled
Turbocharged and aftercooled
Bore
159 mm
6.25 in
Components (2)
Hydraulically driven radiator fan with electronically controlled fan speed
Hydraulically driven radiator fan with electronically controlled fan speed
Stroke
159 mm
6.25 in
Number of Cylinders - Each Engine
12
12
Components (3)
Eliminator with centrifuge for engine oil filtration
Eliminator with centrifuge for engine oil filtration
Components (5)
Microprocessed engine control
Microprocessed engine control
Displacement
37.8 l
2300 in³
Components (1)
Additional high-capacity water separator
Additional high-capacity water separator
Rated Current IN
174 A (at 6.6 kV)
174 A (at 6.6 kV)
Type (1)
Power limit control by Pump Management System
Power limit control by Pump Management System
Type (3)
Custom-made electric motor with increased gap between rotor and stator to withstand severe mining conditions
Custom-made electric motor with increased gap between rotor and stator to withstand severe mining conditions
Frequency
50 Hz (60 Hz on request)
50 Hz (60 Hz on request)
Type (2)
Squirrel cage induction motor
Squirrel cage induction motor
Voltage
6.6 kV ± 10% (other on request)
6.6 kV ± 10% (other on request)
Revolutions
1,500 min-1 (1,800 min-1 at 60 Hz)
1,500 min-1 (1,800 min-1 at 60 Hz)
Starting current
350% of IN (197% of IN optional)
350% of IN (197% of IN optional)
Output
1600 kW
2146 HP
Gross Power - SAE J1995
2256 kW
3023 HP
Net Power - SAE J1349
2221 kW
2977 HP
Emissions
Optimized for fuel consumption.
Optimized for fuel consumption.
Net Power - ISO 9249
2235 kW
2995 HP
Gross Power - SAE J1995
2256 kW
3023 HP
Net Power - SAE J1349
2214 kW
2967 HP
Net Power - ISO 9249
2228 kW
2986 HP
Emissions
Meets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions.
Meets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions.
System Voltage
24 V
24 V
Batteries in Series/Parallel Installation
6 x 210 Ah; 12 V each; 630 Ah 24 V in total
6 x 210 Ah; 12 V each; 630 Ah 24 V in total
Components (1)
6 maintenance-free batteries
6 maintenance-free batteries
Components (2)
Lockable battery isolator switch
Lockable battery isolator switch
Components (3)
Lockable starter isolator switch
Lockable starter isolator switch
Components (4)
13 LED high-brightness working flood lights
13 LED high-brightness working flood lights
Components (5)
16 LED service lights
16 LED service lights
Components (6)
2 electric horns (1 cab module; 1 oil cooler module)
2 electric horns (1 cab module; 1 oil cooler module)
Fuel Tank
11870 l
3136 gal (US)
Hydraulic Tank
7100 l
1876 gal (US)
Hydraulic System - Including Tank
9400 l
2483 gal (US)
Engine Oil
328 l
86.6 gal (US)
Cooling System
800 l
211.4 gal (US)
Swing Drive
160 l
42.4 gal (US)
Grease Tank
710 l
188 gal (US)
Maximum Crowd Force
2200 kN
494410 lb
Maximum Breakout Force
1730 kN
388780 lb
Maximum Digging Height
15.6 m
51.17 ft
Maximum Digging Reach
6.5 m
54.17 ft
Maximum Digging Depth
2.8 m
9.17 ft
Face Shovel (heaped 2:1)
34 m³
44.5 yd³
Backhoe (heaped 1:1)
34 m³
44.5 yd³
Stick Digging Force - ISO
1316 kN
295740 lb
Bucket Digging Force - ISO
1223 kN
274840 lb
Maximum Digging Height
16.1 m
52.83 ft
Maximum Digging Reach
19 m
62.33 ft
Maximum Digging Depth
8.9 m
29.17 ft
X
This site uses and sets "cookies" on your computer to help make this website better. By continuing to use this site without changing your settings, you are agreeing to our use of cookies.
Confirm