973

• Largest track loader in the industry provides the power, breakout force and capacity to take on tough construction utility, forestry and quarry jobs.
• Track loader power, traction and agility mean you can use one machine and one operator to do everything from clearing the site to installing utilities and finishing around buildings.
• Fusion™ Quick Coupler option lets you make fast attachment changes with a wide range of tools like forks, buckets, etc. from wheel loaders and other Fusion compatible machines.
• Bucket/tooth, undercarriage, track shoe and attachment choices help you equip your machine for optimal performance in your applications.
• Purpose-built Waste Handler, Low Ground Pressure (LGP), Ship Hold and Steel Mill configurations stand up to the toughest tasks.

    
• 973 uses up to 10% less fuel per hour than the previous model.

    

• Larger fuel tank means you can work longer before refueling.

    

• Automatic, Eco and Power modes match performance to the job for optimal efficiency.

    

• Performance Series bucket option boosts productivity up to 20% compared to General Purpose bucket.

    

• Cat Payload* technology delivers precise bucket load information with on-the-go weighing. More accurate loading reduces cycle times to help save time, labor and fuel costs.

    

• Advansys™ bucket tips are built to give you maximum productivity and the lowest bucket lifecycle cost for your toughest applications.

    

• Smoother implement and steering response, and improved steering performance provide more controllability.

    

• Load sensing hydraulics and position sensing cylinders offer precise, responsive performance.

All comparisons to 973K track loader.
*Not legal for trade.

    
• Comfortable cab and an intuitive 10-inch (254 mm) touchscreen dash display help make the job easier.

    

• Standard High Definition rearview camera shows prominently in the main display.

    

• Slope Indicate helps make operation easier by showing machine mainfall and cross slope right on the display.

    

• Enjoy operator comforts like suspension seat and adjustable armrests and controls.

    

• Choose either joystick or two-lever implement controls to match operator preference or application.

    

• Speed/steering control choices include either a joystick or a v-lever and foot pedals.

    

• Set implement response – fine, normal, coarse – to match operator preference or application.

    

• Emissions reduction technology (when equipped) is designed to work in the background, with no action required from the operator.

    
• Maximize your track loader versatility with a broad selection of Work Tool attachments to help you take on just about any task.

    

• Fusion Quick Coupler option lets you make fast attachment changes with a wide range of tools from wheel loaders and other Fusion compatible machines.
      
          
  • General Purpose, Multi-Purpose, Performance buckets

          

  • Waste/Landfill buckets

          

  • Trim Blades

          

  • Slag, Side Dump, Specialty buckets

          

  • Forks

          

  • Material Handling Arm

          

  • Grapple

      

      

Check with your Cat dealer to learn more about the variety of attachments you can use on your track loader.

    
• Excellent visibility to the bucket and all around the machine enhances safety and helps operators work more confidently.

    

• Handles and steps help operators climb on and off the machine more easily, from the front or the back of the tracks.

    

• Standard rear vision camera enhances visibility behind the machine.

    

• Seat belt indicator gives an alarm and registers fault code through Product Link if the operator fails to buckle up, enhancing job site safety.

    

• Ergonomics, a quiet engine and low-effort controls help lessen fatigue, so operators are better able to remain fresh and focused.

• Equip your loader from the factory to take on extra-challenging tasks like soft footing, waste handling, ship hold and steel mill work.
• For added flotation and traction, or work in more sensitive ground conditions, choose a Low Ground Pressure (LGP) loader with wider tracks.
• Waste Handler configuration is a versatile machine for loading, sorting, excavation and spreading cover, and well suited to the landfill or transfer station. Specialized guarding, striker bars and seals help protect the machine and components from impact and airborne debris. Enhanced Cleaning Package reduces cleaning time, adds machine protection and increases compaction.
• Traction, high reach and machine balance make track loaders ideal for working in ship holds and port handling duties. Specialized guarding and seals help protect the machine, while attachments like coal buckets and trim blades help you get the job done.

Note: 963 Waste Handler model shown

• Factory-designed and installed features equip your 973 track loader for the extreme heat and harsh conditions of steel mill work.
• Maneuverability, visibility and the breakout force needed for fast cycle times make crawler loaders a rugged and efficient choice for handling slag.
• Specialized heavy duty guarding, insulation, thermal deflectors and high temperature seals throughout the machine.
• Steel mill cab with heavy duty, laminated windshield glass and steel roof plate.
• Insulated Steel Mill fuel tank.
• Welded side bars reduce thermal distortion of the track roller frame.
• High capacity slag bucket features thicker structures and stronger teeth/cutting edges for longer service life.

Steel Mill Operating Recommendations: Caterpillar recommends that Steel Mill machines be exposed to hot slag for less than 15 minutes each hour to allow for adequate cooling time between cycles. Typically, two machines per furnace and a backup machine for the site provide the best uptime. The timing, frequency and duration of the work and cooling cycles varies by job site, but exceeding the recommended exposure time will prevent the machine from meeting expected performance levels.

• Designed to help you take care of routine maintenance and get back to work.
• Grouped service points located behind large access doors.
• Daily grease points in easy reach at ground level.
• Service mode in the operator display shows hydrostatic and implement pressure for easier troubleshooting and servicing.
• Demand fan provides efficient cooling plus easy fold-down service access.
• Handy bracket holds a shovel for quick undercarriage clean-out.
• Tilt cab and convenient service access points for easier maintenance and repair.
• Diesel Particulate Filter in the Clean Emissions Module (when equipped) designed to work for the life of the engine without needing to clean or replace the filter.

• Product Link™ collects machine data that can be viewed online through web and mobile applications.
• Access information anytime, anywhere with VisionLink® and use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your job site.
• The Cat App helps you manage your assets, at any time, right from your smartphone. See fleet location and hours, get critical required maintenance alerts, and even request service from your local Cat dealer.
• Remote Troubleshoot saves time and money by allowing your Cat dealer to perform diagnostic testing remotely.
• Remote Flash updates on-board software without a technician being present, at a time that is convenient for you, potentially reducing update time by as much as 50%.

NOTE

1. Standard and optional equipment may vary. Consult your Cat dealer for details.

Power Train

1. Cat C9.3B Diesel Engine
2. Hydraulic demand fan
3. Hydrostatic transmission
4. Load sensing implement pump
5. Modular cooling system

Operator Environment

1. 12V power outlet and 5V USB port
2. Adjustable armrests
3. Configurable implement levers
4. Full-color 254 mm (10 in) touchscreen display with integrated rear camera, machine slope indicator, bucket angle indicator
5. Grab handle on dash
6. Heat/Air conditioning
7. Integrated rearview HD camera
8. Lights – 4 halogen
9. Standard cab with one sliding side window and four halogen lights: two facing forward, roof mounted, two facing rearward, integrated in the air conditioner unit
10. 24V radio ready
11. Storage areas throughout cab
12. Lunch box storage with strap holder

Cat Technology

1. Slope Indicate
2. Product Link™ ready

Undercarriage

1. HDXL track
2. Oscillating track roller frames

Buckets

1. Pin-on
2. Cat Advansys™ bucket tips/Ground Engaging Tools

Service and Maintenance

1. 4 x 2 Easy tie-down points on chassis
2. Metallic fuel tank
3. Ecology drains
4. Ground level service center
5. Hinged radiator guard and swing out fan
6. Shovel holder

NOTE

1. Standard and optional equipment may vary. Consult your Cat dealer for details.

Power Train

1. Cat C9.3B diesel engine with engine-mounted aftertreatment to meet U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV, Japan 2014 emission standards
2. Cat C9.3B diesel engine to meet Eurasian Economic Union Stage IIIA, UN ECE R96 Stage IIIA emission standards, equivalent to Tier 3/Stage IIIA

Operator Environment

1. Communication radio ready – FM
2. Deluxe seat
3. Joystick or two-lever implement controls
4. Joystick or V-lever-and-pedal steering controls
5. LED flashing beacon
6. Lights – 2 LED front/bottom of cab, access light
7. Lights – 8 LED
8. Premium seat
9. Radio AM/FM Bluetooth
10. Radio AM/FM/DAB+ Bluetooth
11. Radio AM/FM/Sirius XM Bluetooth
12. Deluxe cab package with two sliding side windows and eight LED lights: four roof-mounted facing forward, two facing rearward and two facing side integrated in the air conditioner unit
13. Steel Mill cab with thermal protection, all sealed windows, windshield and front light protection, eight halogen lights: four facing forward, two facing sideways, two facing rearward integrated into air conditioner unit

Cat Technology

1. Remote Flash/Remote Troubleshoot
2. Product Link, Cellular
3. Product Link — Dual Cellular/Satellite
4. Cat Payload
5. Grade control mast

Undercarriage

1. Single, Double or Triple Grouser track shoes
2. Waste or Low Ground Pressure (LGP) undercarriage
3. Steel Mill undercarriage

Buckets

1. Fusion quick coupler
2. General Purpose bucket
3. Landfill bucket
4. Multi-Purpose bucket
5. Performance bucket
6. Slag bucket

Service and Maintenance

1. Cold weather package
2. Fast fuel fill
3. Insulated metallic fuel tank (Steel Mill)
4. High Speed oil change
5. Hydraulic reversing fan
6. Hydraulic tilt cab
7. Refueling pump

Attachments

1. Bumper
2. Counterweights
3. Multi-shank ripper
4. Ripper hitch
5. Ripper-ready rear hydraulics
6. Striker bar box

Special Arrangements

1. Low Ground Pressure (LGP) Arrangement
2. Waste Handler
3. Ship Hold Arrangement
4. Steel Mill Arrangement