730 EJ

    
• Cat C13B engine delivers proven reliability across a variety of applications.

    

• Terrain-based throttle control smooths throttle input over rough terrain to improve ride quality.

    

• Enhanced reliability through commonality and design simplicity with long life to overhaul.

    

• Minimized impact of emission control system allows excellent response and ample power.

    

• Engine compression brake improves response and increases retarding power for controlled descent of grades.

    

• Aftertreatment technologies reduce emissions, including reducing NOx emissions by 80%.

    
• The truck can eject and spread the material while moving, reducing additional spreading and dozing equipment. “On-the-go” ejecting results in faster cycle times.

    

• Ejecting the load without raising the body maintains machine stability, allowing load dispersal on inclines, side slopes, and in very soft underfoot conditions, especially on landfill sites.

    

• The truck can eject in areas with reduced overhead clearance, such as around overhead lines or in tunneling and underground operations.

    

• The body design virtually eliminates material sticking to the body, which increases productivity, improves fuel efficiency, and lowers cost per ton.

    

• The ejector blade is made from high-strength steel and uses technology similar to that proven in Cat wheel tractor-scrapers.

    

• A three-stage, high-speed, double-acting cylinder is specifically designed for horizontal mounting and smooth load ejection.

    
• All structures and components are proven through extensive testing and customer experience.

    

• Advanced suspension allows for greater speed over rough terrain, while softening impact loads.

    

• Front suspension oscillates ±6 degrees for a smooth ride.

    

• Frames are designed to handle torque loads, decrease hitch area stress, and optimize suspension geometry.

    

• Frames are robot-welded for maximum durability.

    
• Advanced Automatic Traction Control (AATC) decreases wheel slippage, delivering maximum traction and productivity. Fully automatic, no operator action.

    

• Automatic Retarder Control (ARC) manages the retarder without any operator interaction. Fully automatic, 100% of the time.

    

• Assisted Hoisting Control allows automatic ejecting of the load.

    

• Combined eject/transmission lever, exclusive to Caterpillar, places multiple controls on the transmission lever, incorporates park brake, and reduces operator interaction by as much as 50%.

    
• Economy mode reduces fuel use without affecting productivity and can be engaged with a single button.

    

• This machine design improves fuel economy with minimized maintenance costs and the same great power and response.

    

• Innovative air-management systems optimize airflow and enhance power and fuel efficiency.

    

• Fully automatic retarder control helps prevent engine overspeed, protects powertrain components without any operator intervention.

    
• Tilt and telescopic steering column designed for operator comfort and control. This adjustable column allows drivers to fine-tune the steering wheel position for optimal ergonomics, especially during long shifts or rough terrain operations.

    

• Simple, intuitive control and display layouts allow the operator to focus on safe machine operation, while maintaining productivity.

    

• Spacious cab with seats positioned for optimal operator and trainer visibility.

    

• Touchscreen allows easy monitoring and adjustment of systems.

    

• Make and receive hands-free calls via the optional Bluetooth® equipped stereo.

    

• The HVAC system is now managed through the primary display with controls accessible via the jog dial or touchscreen for enhanced operator convenience.

    

• The cab features dedicated storage solutions for everyday items, ensuring convenience and organization for the operator.

    
• Integrated systems give you the ability to make timely, fact-based decisions to maximize efficiency, improve productivity, and lower costs.

    

• Product Link™ system connects to each machine wirelessly, allowing you to monitor location, hours, fuel use, productivity, idle time, and diagnostic codes.

    

• Improved payload technology allows operators to view real-time load weights on the integrated display. Updated software and sensors provide accurate data.

    

• External payload indicator lights alert the loader when to stop, reducing the risk of machine overloading.

    

• Stability Assist software reports information via online VisionLink™, increasing awareness of machine history if a rollover has occurred.

    
• Unique safety feature Dynamic Roll Protection supports rollover prevention and works in parallel with the already successful Cat Detect with Stability Assist, reducing downtime and safety repairs from machine rollover events.

    

• Operator-presence detection system applies parking brake if gear is engaged and operator is not seated.

    

• In-cab tertiary switch allows operator to bring the machine to a safe stop in the unlikely event of both main and secondary brake circuits failing.

    

• Hill Assist reduces potential rollback on grades.

    

• Auto Wait Brake applies the service brakes when neutral is selected and button is pressed, allowing quick and easy control of the machine while dumping and loading.

    

• Ground-level fuel fill and diesel exhuast fluid (DEF) fill tanks.

    

• Integrated payload lights [when Cat Payload Monitoring (CPM) option is fitted] with wide angle beam lights on all cab roof corners provide clear visibility to loading tool operator and site controllers.

    

• Secondary steering activates automatically if low pressure is sensed in primary system.

    

• Seat belt indicator provides audible and visible alert if seatbelt is not latched while the machine is on.

    
• Durable design and easier servicing mean maximized uptime and reduced service costs.

    

• Universal joints are lubricated for life, eliminating any greasing during the product lifetime.

    

• Coolant formula improves component life by reducing corrosion.

    

• Entire machine is designed for greater ease of maintenance with side-tilting cab, electrically raised hood, access panels, and data connector.

    

• Extended service intervals for the engine and transmission: 1,000 and 2,000 hours, respectively. Doubled from previous models and resulting in lower total cost of ownership.

    

• Durable flexi fender reduces the risk of permanent damages and reduces repair costs.

NOTE

1. Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

1. Adjustable air vents
2. Combined gear selection and hoist control lever
3. Glass windows:
   – Front, laminated and tinted
   – Sides and rear, toughened and tinted
4. Air conditioning
5. Heater and defroster with four-speed fan
6. Mirrors, exterior
7. Machine operation monitoring system includes:
   – Action lamp
   – Engine oil pressure
   – Primary steering system
   – Left and right turn signal
   – High beam
   – Coolant temperature
   – Tachometer
   – Parking brake
   – Fuel level
   – Transmission oil temperature
   – Brake system
   – Transmission hold
   – Eject control
   – Hydraulic system
   – Charging system
   – Retarder
   – Transmission fault
   – Traction control system
   – Check engine lamp
8. Liquid Crystal Display (LCD):
   – Alert indicator
   – Selected gear and direction
   – Speed or auto shift
   – Review Operation and Maintenance Manual (OMM)
   – Primary steering failure warning
   – Seat belt warning
   – Secondary steering failure warning
   – Diesel Particulate Filter (DPF) regeneration filter
   – Secondary steering energy source engaged
   – Hour meter
   – Retarder active
9. Seats:
   – Operator: fully adjustable, air suspension
   – Trainer: padded with lap belt
10. Secondary steering – electro hydraulic
11. Storage:
    – Cup holder
    – Flask receptacle
    – Under seat storage
    – Door pocket
    – Behind operator seat storage
    – Coat hook
12. Sun visor
13. Tilt and telescopic steering wheel
14. 10-inch touchscreen display with Cat® rearview camera
15. Retractable belt: Operator seat and second seat
16. Windows opening both sides, tinted
17. Windshield wiper and washer, two speed, intermittent (front)
18. Windshield wiper and washer, two speed (rear)

TECHNOLOGY

1. Product Link Cellular PLE643
2. Cat Detect with Stability Assist

ELECTRICAL AND LIGHTING

1. Batteries (x2) maintenance free
2. Electrical system: 24-volt, 5A 24- to 12-volt converter
3. Horn
4. Lighting systems:
   – Cab interior
   – Two head lamps
   – Two width marker
   – Two reversing
   – Work light/cab access light
   – Two stop/tail lights
   – Front and rear direction indicators
5. Main disconnect switch
6. Remote starting receptacle (cables not included)

POWERTRAIN

1. Auto shift six-speed forward and single reverse transmission
2. Cat C13B engine
3. Clean Emission Module (CEM) and exhaust aftertreatment package
4. Differentials: standard with automatic clutched inter- and cross-axle differential locks
5. Dual circuit oil immersed, enclosed brakes – all wheels
6. Retarder: engine compression brake
7. Three axle, six-wheel drive

SAFETY

1. Reverse alarm
2. Rearview camera
3. Rollover protective structure (ROPS)/falling objects protective structure (FOPS) cab
4. Dynamic Rollover Protection

GUARDS

1. Rear window
2. Radiator
3. Crankcase
4. Front dump body spill guard, integral part of fabricated body

OTHER STANDARD EQUIPMENT

1. Mud flaps: wheel arch and body mounted with transportation tiebacks
2. S·O·S sampling valves
3. Tires, six 750/65 R25 radial
4. Vandalism protection: lockable caps
5. Sound suppression (standard in some countries*)
   *Countries are EU countries plus Iceland, Norway, Lichtenstein, Switzerland, Türkiye and UK.
6. Underslung tailgate

NOTE

1. Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

1. Infrared glass – high ambient cab
2. Radio, Bluetooth® stereo system
3. Window blinds
4. Mirrors, heated motorized
5. Secondary touchscreen display
6. Operator seat belt, four-point
7. Seat, heated/cooled

TECHNOLOGY

1. Cat Payload monitoring system
2. Product Link Dual PLE683
3. Operator Coaching

ELECTRICAL AND LIGHTING

1. Roof mounted LED work lights
2. Ether start
3. Cold weather start attachment (2 additional batteries)
4. Engine block heater
5. Flashing LED beacon

OPTIONAL EQUIPMENT

1. Fast fuel fill
2. Auto lube installation for automatic greasing of bearings
3. Cold weather coolant –51° C (–60° F)
4. Exhaust heated body
5. Fuel additive – anti-waxing
6. Wheel chocks