735

    
• The Cat® C13B engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.

    

• Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.

    

• Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.

    

• VisionLink® displays the CO2 emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.

    

• Don’t waste fuel idling. Cat VisionLink® online fleet monitoring helps you manage idle time and reduce fuel burn and greenhouse gas emissions.

    

• Cat® Stability Assist for Articulated Trucks helps improve machine safety and uptime by increasing awareness of machine stability during operation.

    

• Cat® Production Measurement provides real-time payload weighing which help you maximize productivity, reduce fuel burn and greenhouse gas emissions, all while improving job site efficiency and lowering costs.

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).

NOTE

1. Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

1. Retractable belt: Operator seat and second seat
2. Touchscreen display incorporating the rearview camera video feed
3. Windshield wiper and washer, two speed, intermittent (front)
4. Mirrors: exterior
5. Windows opening side, tinted
6. Heater and defroster with four-speed fan
7. Glass windows:
   – Front, laminated and tinted
   – Sides and rear, toughened and tinted
8. Sun visor
9. Secondary steering – electro hydraulic
10. Machine operation monitoring system includes:
    – Action lamp
    – Engine oil pressure
    – Primary steering system
    – Left and right turn signal
    – High beam
    – Coolant temperature
    – Tachometer
    – Parking brake
    – Fuel level
    – Transmission oil temperature
    – Brake system
    – Transmission hold
    – Hoist control
    – Hydraulic system
    – Charging system
    – Retarder
    – Transmission fault
    – Traction control system
    – Check engine lamp
11. Air conditioning
12. Combined gear selection and hoist control lever
13. Seats:
    – Operator: fully adjustable, air suspension
    – Trainer: padded with lap belt
14. Liquid Crystal Display (LCD):
    – Alert indicator
    – Selected gear and direction
    – Speed or auto shift
    – Review Operation and Maintenance Manual (OMM)
    – Primary steering failure warning
    – Seat belt warning
    – Secondary steering failure warning
    – Diesel Particulate Filter (DPF) regeneration filter
    – Secondary steering energy source engaged
    – Hour meter
    – Retarder active
15. Storage:
    – Cup holder
    – Flask receptacle
    – Under seat storage
    – Door pocket
    – Behind operator seat storage
    – Coat hook
16. Tilt and telescopic steering wheel
17. Adjustable air vents

TECHNOLOGY

1. Product Link Cellular PLE643
2. Cat® Detect with Stability Assist

ELECTRICAL AND LIGHTING

1. Remote starting receptacle (cables not included)
2. Electrical system: 24-volt, 10A 24- to 12-volt converter
3. Horn
4. Lighting systems:
   – Cab interior
   – Two head lamps
   – Two width marker
   – Two reversing
   – Work light/cab access light
   – Two stop/tail lights
   – Front and rear direction indicators
5. Main disconnect switch
6. Batteries (x2) maintenance free

POWERTRAIN

1. Cat Clean Emission Module (CEM) and exhaust aftertreatment package
2. Three axle, six-wheel drive
3. Auto shift six-speed forward and single-speed reverse transmission
4. Retarder: engine compression brake and hydraulic
5. Dual circuit oil immersed, enclosed brakes – all wheels
6. Cat C13B engine
7. Differentials: standard with automatic clutched inter- and cross-axle differential locks

SAFETY

1. Rollover protective structure/Falling objects protective structure (ROPS/FOPS) cab
2. Rearview camera
3. Reverse alarm

GUARDS

1. Crankcase
2. Front dump body spill guard, integral part of fabricated body
3. Rear window
4. Radiator

OTHER STANDARD EQUIPMENT

1. Vandalism protection: lockable caps
2. Tires, six 750/65 R25
3. Mud flaps: wheel arch and body mounted with transportation tiebacks
4. Scheduled Oil Sampling (S•O•S) sampling valves
5. Sound suppression (standard in some countries*)
   *Countries are EU countries plus Iceland, Norway, Lichtenstein, Switzerland, Türkiye and UK.

NOTE

1. Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

1. Seat, heated/cooled
2. Mirrors, heated motorized
3. Infrared glass – high ambient cab
4. Window blinds
5. Radio, Bluetooth® stereo system
6. Operator seat belt, four-point
7. Windshield wiper and washer, two speed (rear)

TECHNOLOGY

1. Cat® Payload monitoring system
2. Product Link Dual PLE683
3. Operator Coaching

ELECTRICAL AND LIGHTING

1. Cold weather start attachment (2 additional batteries)
2. Engine block heater
3. Ether start
4. Flashing LED beacon
5. Roof mounted LED work lights

OPTIONAL EQUIPMENT

1. Fuel additive – anti-waxing
2. Scissor tailgate
3. Exhaust heated body
4. Cold weather coolant –51° C (–60° F)
5. Auto lube installation for automatic greasing of bearings
6. Bare chassis (no body) standard wheel base
7. Bare chassis (no body) long wheel base
8. Wheel chocks
9. Body liners
10. Fast fuel fill