1300 881 064 
FIND A BRANCH
DIGITAL TOOLS
Product Compare
Please use a desktop browser to compare products.
Engine 
Net Power
699 hp
521 kW
Engine Model
Cat® C27 ™
Cat® C15
Cat® C18
Bore
5.4 in
137.2 mm
5.4 in
137 mm
5.7 in
145 mm
Stroke
6.0 in
152.4 mm
6.75 in
171.5 mm
7.2 in
183 mm
Displacement
1649.5 in³
27.03 l
927 in²
15.2 l
1105 in³
18.1 l
Torque Rise
18.0 %
18.0 %
16%
58 %
58 %
Rated Speed
1,800/min
2000
1700/rpm
Rated Speed - Gross - ISO 14396
752 hp
561 kW
Gross - ISO 14396
752 hp
561 kW
Net Power - SAE J1349:2011
699 hp
521 kW
373 hp
278 kW
538 hp
401 kW
Rated Speed - Net Power - SAE J1349 - Standard Ambient
699 hp
521 kW
Rated Speed - Net Power - SAE J1349 - High Ambient
648 hp
483 kW
Peak Torque - 1,200 rpm
2624 lb/ft
3557 N·m
2104 lbf·ft
2852 N·m
Rated Speed - Gross - SAE J1995
766 hp
571 kW
Emissions
U.S. EPA Tier 4 Final or Tier 2 equivalent
Operating Specifications
Operating Weight
202398 lb
91807 kg
112574 lb
51062 kg
Tipping Load - Straight
92990 lb
42180 kg
Tipping Load - Articulated 35°
81896 lb
37148 kg
Transmission
Transmission Type
Cat-Planetenlastschaltgetriebe
Cat planetary power shift
Cat planetary powershift
Forward - 1
4.5 mile/h
7.3 km/h
5 mile/h
7.3 km/h
4.0 mile/h
6.5 km/h
Forward - 2
8.3 mile/h
13.3 km/h
8 mile/h
12.2 km/h
7.2 mile/h
11.6 km/h
Forward - 3
14.2 mile/h
22.9 km/h
12.7 mile/h
20.4 km/h
Reverse - 1
4.9 mile/h
7.9 km/h
5 mile/h
7.6 km/h
4.7 mile/h
7.5 km/h
Reverse - 2
9.1 mile/h
14.7 km/h
8 mile/h
13.6 km/h
8.3 mile/h
13.3 km/h
Reverse - 3
15.5 mile/h
24.9 km/h
14.4 mile/h
23.2 km/h
Direct Drive - Forward 3
15.2 mile/h
24.5 km/h
14 mile/h
22 km/h
13.9 mile/h
22.3 km/h
Direct Drive - Forward 1
Lock-up disabled
Lock-up disabled
Direct Drive - Reverse 3
16.4 mile/h
26.4 km/h
16 mile/h
25 km/h
15.8 mile/h
25.5 km/h
Direct Drive - Reverse 1
5.4 mile/h
8.7 km/h
5.0 mile/h
8.0 km/h
Direct Drive - Reverse 2
9.6 mile/h
15.4 km/h
9 mile/h
14.1 km/h
8.9 mile/h
14.3 km/h
Direct Drive - Forward 2
8.5 mile/h
13.7 km/h
8 mile/h
12.7 km/h
7.8 mile/h
12.5 km/h
Note
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
- All dimensions are approximate.
- Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester)* – 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. • Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** • For pre-Tier 4 engines: Cat engines are compatible with diesel fuel blended with the following lower-carbon intensity fuels** up to: – 100% biodiesel FAME (fatty acid methyl ester)* – 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * For use of blends higher than 20% biodiesel, consult your Cat dealer. ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Hydraulic System - Lift/Tilt
Maximum Flow at 1,800 rpm (1)
216 gpm
817 L/min
Lift/Tilt System - Circuit
Positive flow control
Load Sense
EH- Positive Flow Control, Flow Sharing
Relief Valve Setting - Lift/Tilt
4786 psi
33000 kPa
4050 psi
27900 kPa
4757 psi
32800 kPa
Maximum Flow at 1,800 rpm (2)
22.2 gpm
84 L/min
Relief Valve Setting - Main
507 psi
3500 kPa
551 psi
3800 kPa
Pilot System
Open loop and pressure reducing
Variable displacement piston
Lift/Tilt System
Variable displacement piston
Cylinders, Double Acting - Tilt, Bore and Stroke
317.5 mm × 819 mm (12.5 in × 32.2 in)
266 mm × 685 mm (8.7 in × 27 in)
Cylinders, Double Acting - Lift, Bore and Stroke
254 mm × 1264 mm (10.0 in × 49.8 in)
210 mm × 1050 mm (8.7 in × 41.3 in)
Hydraulic Cycle Times
Raise
9.4 s
9.4 s
9 s
9 s
8.0 s
8.0 s
Dump
2.9 s
2.9 s
3.5 s
3.5 s
2.2 s
2.2 s
Lower Float Down
3.6 s
3.6 s
4.3 s
4.3 s
3.5 s
3.5 s
Lower
3.7 s
3.7 s
5.2 s
5.2 s
Rack Back
4.8 s
4.8 s
4.5 s
4.5 s
4.5 s
4.5 s
Service Refill Capacities
Fuel Tank
294.3 gal (US)
1114.0 l
141 gal (US)
535 l
188 gal (US)
712 l
Cooling System
54.9 gal (US)
208.0 l
31.7 gal (US)
120 l
Transmission
29.1 gal (US)
110.0 l
20 gal (US)
75 l
24.3 gal (US)
92 l
Hydraulic Tank - Steering and Braking
34.9 gal (US)
132 l
Differential - Final Drives - Rear
68.9 gal (US)
261 l
49.1 gal (US)
186 l
Engine Crankcase
20.0 gal (US)
75.7 l
Differential - Final Drives - Front
71.6 gal (US)
271 l
49.1 gal (US)
186 l
Hydraulic Tank - Implement and Hydraulic Fan
68.9 gal (US)
261 l
Hydraulic System Factory Fill
210.0 gal (US)
795 l
87 gal (US)
330 l
125.5 gal (US)
475 l
Axles
Front
Fixed
Fixed
Fixed
Rear
Trunnion
Trunnion
Trunnion
Oscillation Angle
8.5°
±12.5°
13 °
Brakes
Brakes
SAE J1473 OKT90, ISO 3450:1992
ISO 3450:2011
ISO 3450:2011
Hydraulic System - Steering
Relief Valve Setting - Steering
4641 psi
32000 kPa
4351 psi
30000 kPa
Maximum Flow at 1,400 rpm
94.5 gpm
358 L/min
52 gpm
200 L/min
Steering System - Circuit
Pilot, load sensing
Load Sense
Pilot, load sensing
Total Steering Angle
70°
70°
86 °
Steering System - Pump
Piston, variable displacement
Piston, variable displacement
Piston, variable displacement
Sound Performance - Standard
Machine Sound Level (ISO 6395:2008)
115 dB(A)
115 dB(A)
Operator Sound Level (ISO 6396:2008)
69 dB(A)
69 dB(A)
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008)
69 dB(A)
69 dB(A)
Machine Sound Level (ISO 6395:2008)
115 dB(A)
115 dB(A)
Dimensions - Millyard Linkage - Approximate
Ground to Top of Exhaust Stacks
16.6 ft
5049 mm
13.3 ft
4060 mm
14.8 ft
4521 mm
Fork Height at Maximum Lift
18.3 ft
5591 mm
Ground to Top of Hood
12.7 ft
3862 mm
10.7 ft
3270 mm
10.9 ft
3334 mm
Ground to Top of ROPS
17.2 ft
5240 mm
13.5 ft
4100 mm
13.8 ft
4202 mm
Fork Top Clamp Opening
12.3 ft
3745 mm
Maximum Overall Length
45.4 ft
13840 mm
36.6 ft
11143 mm
39.3 ft
11991 mm
Ground to Lower Hitch Clearance
2.0 ft
596 mm
1.5 ft
459 mm
1.9 ft
568 mm
Ground to Bumper Clearance
3.1 ft
959 mm
Fork Height with Level Arms
8.9 ft
2708 mm
Front Axle Centerline to Fork Tip
17.6 ft
5362 mm
Rear Axle - Centerline to Bumper
12.5 ft
3795 mm
10.3 ft
3132 mm
10.5 ft
3187 mm
Ground to Center of Front Axle
3.9 ft
1186 mm
3.2 ft
978 mm
Hinge Pin Height at Maximum Lift
19.4 ft
5903 mm
Wheel Base
15.1 ft
4600 mm
12.5 ft
3810 mm
14.9 ft
4550 mm
Dump Angle at Maximum Lift
29.3 degrees
Forks
Fork End Area
78 ft²
7.2 m²