Cat® Product Compare

Products

Equipment

Wheel Loaders

Compact Wheel Loaders

Product Compare

Please use a desktop browser to compare products.

Metric | Imperial

Compact Wheel Loaders

908

GET A QUOTE

Compact Wheel Loaders

906

GET A QUOTE

Engine

Maximum Gross Power

75.1 hp 60 kW

Engine Model

Cat C2.8*

Maximum Engine Speed

2550 rpm

Maximum Gross Power - Rated Engine Speed

2400 r/min 2400 r/min

Maximum Gross Power - SAE J1995

75.1 hp 60 kW

Maximum Gross Power - ISO 14396

74.3 hp 55.4 kW

Maximum Gross Power - ISO 14396 (metric)

75.3 mhp 75.3 mhp

Rated Net Power - Rated Engine Speed

2400 r/min 2400 r/min

Rated Net Power - SAE J1349

73 hp 54.4 kW

Rated Net Power - ISO 9249

72.1 hp 53.8 kW

Rated Net Power - 2,400 rpm - ISO 9249 (metric)

73.1 mhp 73.1 mhp

Maximum Gross Torque - SAE J1995

222 lb/ft 301 N·m

Maximum Gross Torque - ISO 14396

221 lb/ft 300 N·m

Maximum Net Torque - SAE J1349

218 lb/ft 296 N·m

Maximum Net Torque - ISO 9249

217 lb/ft 295 N·m

Displacement

171 in³ 2.8 l

Bore

3.54 in 90 mm

Stroke

4.33 in 110 mm

Note

*Equivalent to U.S. EPA Tier 3 and EU Stage IIIA.

Note (1)

Maximum gross and net torque measured at 1,600 rpm.

Note (2)

Net power ratings are tested at the reference conditions for the specified standard.

Note (3)

Net power advertised is the power available at the flywheel.

Weights

Operating Weight

14617 lb 6632 kg

12628 lb 5730 kg

Buckets

Bucket Capacities

0.75-1.55 m³ (1.0-2.0 yd³)

Bucket Capacities - General Purpose

0.80-1.35 m³ (1.0-1.7 yd³)

Bucket Capacities - Light Material

1.25-1.55 m³ (1.6-2.0 yd³)

Multi-Purpose

0.75-1.1 m³ (1.0-1.4 yd³)

Note

*Equivalent to U.S. EPA Tier 3 and EU Stage IIIA.

Note (1)

Maximum gross and net torque measured at 1,600 rpm.

Service Refill Capacities

Fuel Tank

24 Gal 90 l

18.5 Gal 70 l

Cooling System

3.2 Gal 12 l

Engine Crankcase

2.3 Gal 8.8 l

Axles - Front Center Differential

2.3 Gal 8.8 l

Axles - Rear Center Differential

2.3 Gal 8.8 l

Hydraulic System - Including Tank

18.6 Gal 70.5 l

17.8 Gal 67.5 l

Hydraulic Tank

11.8 Gal 44.6 l

Transmission

0.6 Gal 2.4 l

Note

*Equivalent to U.S. EPA Tier 3 and EU Stage IIIA.

Axles

Front

Fixed (standard)

Rear

Fixed (standard)

Note

*Equivalent to U.S. EPA Tier 3 and EU Stage IIIA.

Steering

Steering Articulation Angle - Each Direction

39 ° 39 °

Maximum Flow - Steering Pump

12.3 gpm 46.7 L/min

Maximum Working Pressure - Steering Pump

3336 psi 23000 kPa

Steering Cycle Times – (full left to full right) – at High Idle

2.8 s 2.8 s

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left

3.25 turns or 4.00 turns

Transmission

Forward and Reverse - Speed Range Creep#

6 mile/h 10 km/h

Forward and Reverse - Speed Range 1*

6 mile/h 10 km/h

Forward and Reverse - Speed Range 2** - High Speed

11 mile/h 18 km/h

10.5 mile/h 17 km/h

Forward and Reverse - Speed Range 2** - Standard

12 mile/h 20 km/h

Forward and Reverse - Speed Range 3***

25 mile/h 40 km/h

Note

*Equivalent to U.S. EPA Tier 3 and EU Stage IIIA.

Note (1)

Maximum gross and net torque measured at 1,600 rpm.

Note (2)

Net power ratings are tested at the reference conditions for the specified standard.

Note (3)

Net power advertised is the power available at the flywheel.

Tires

Tire Size - Standard

*405/70 R20 SPT9

*405/70 R18 SPT9

Tire Size - Optional

405/70 R20 Powerloads

405/70 R18 Powerloads

Tire Size - Optional (1)

400/70 R20 XMCL/Bibload

340/80 R18 XMCL/Bibload

Tire Size - Optional (2)

360/80 R20 TRI 2

340/80 R18 TRI 2

Tire Size - Optional (3)

40X14-20 TL, SM/TR

Note

*Equivalent to U.S. EPA Tier 3 and EU Stage IIIA.

Note (1)

Maximum gross and net torque measured at 1,600 rpm.

Note (2)

Net power ratings are tested at the reference conditions for the specified standard.

Note (3)

Net power advertised is the power available at the flywheel.

Cab

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 Level II

Note (1)

Maximum gross and net torque measured at 1,600 rpm.

Note (2)

Net power ratings are tested at the reference conditions for the specified standard.

Note (3)

Net power advertised is the power available at the flywheel.

Note (4)

The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 101 dB(A). 99 dB(A) Low Sound – Option available.

Loader Hydraulic System

Main Relief - 1st Auxiliary (3rd slice)

3408 psi 23500 kPa

Main Relief - 1st Auxiliary (3rd slice) - Standard Flow*

24 gpm 90 L/min

21 gpm 80 L/min

Main Relief - 1st Auxiliary (3rd slice) - High Flow*

33 gpm 125 L/min

32 gpm 120 L/min

Main Relief - 2nd Auxiliary (4th slice)

3408 psi 23500 kPa

Main Relief - 2nd Auxiliary (4th slice) - Flow

12 gpm 45 L/min

Hydraulic Cycle Time - Rackback

2.5 s 2.5 s

2.2 s 2.2 s

Hydraulic Cycle Time - Lift

5.8 s 5.8 s

5 s 5 s

Hydraulic Cycle Time - Dump

1.8 s 1.8 s

1.6 s 1.6 s

Hydraulic Cycle Time - Float Down

3.6 s 3.6 s

2.8 s 2.8 s

Note

*Equivalent to U.S. EPA Tier 3 and EU Stage IIIA.

Dimensions - With HPL-V Coupler - Approximate#

Height: Ground to Cab**

8.75 ft 2670 mm

8.08 ft 2468 mm

Height: Ground to Beacon**

9.33 ft 2853 mm

8.67 ft 2651 mm

Height: Ground Axle Center**

1.67 ft 519 mm

1.5 ft 480 mm

Height: Ground Clearance**

1 ft 320 mm

0.92 ft 300 mm

Length: Overall*

18.17 ft 5549 mm

17.58 ft 5369 mm

Length: Rear Axle to Bumper

4.5 ft 1391 mm

Length: Hitch to Front Axle

3.5 ft 1085 mm

Length: Wheel Base

7.08 ft 2170 mm

Clearance: Bucket at 45° *

8.5 ft 2615 mm

8.17 ft 2499 mm

Clearance: Load over Height**

9.67 ft 2957 mm

9.5 ft 2900 mm

Clearance: Level Bucket**

10.42 ft 3197 mm

9.92 ft 3038 mm

Height: Bucket Pin**

11.08 ft 3404 mm

10.58 ft 3244 mm

Height: Overall**

14.08 ft 4304 mm

13.5 ft 4115 mm

Reach: Bucket at 45° *

2.5 ft 770 mm

2.33 ft 725 mm

Carry Height: Bucket Pin

1.08 ft 353 mm

1 ft 311 mm

Dig Depth**

0.42 ft 109 mm

0.25 ft 77 mm

Width: Bucket

6.75 ft 2080 mm

6.17 ft 1890 mm

Width: Tread Center

5.08 ft 1570 mm

4.58 ft 1420 mm

Turning Radius: Over Bucket

14.92 ft 4570 mm

14.42 ft 4406 mm

Width: Over Tires

6.5 ft 1990 mm

6 ft 1840 mm

Turning Radius: Outside of Tires

13.33 ft 4087 mm

13.08 ft 4007 mm

Turning Radius: Inside of Tires

6.67 ft 2033 mm

6.92 ft 2128 mm

Rack Angle at Full Lift

53°

56°

Dump Angle at Full Lift

45°

Rack Angle at Carry

51°

Departure Angle - Degrees

30°

Articulation Angle - Degrees

39°

Operating Weight: Bucket ^

14617 lb 6632 kg

12628 lb 5730 kg

Tipping Load - Straight - ISO 14397-1 †

10604 lb 4812 kg

9756 lb 4427 kg

Tipping Load - Full Turn - ISO 14397-1 †

8947 lb 4060 kg

8157 lb 3701 kg

Operating Weight: Carriage and Tines ^^

14252 lb 6467 kg

12236 lb 5552 kg

Tipping Load - Straight †

8639 lb 3920 kg

7745 lb 3514 kg

80% of Tip: Firm and Level EN474-3 ††

5813 lb 2638 kg

5209 lb 2364 kg

Note (1)

Maximum gross and net torque measured at 1,600 rpm.

Note (2)

Net power ratings are tested at the reference conditions for the specified standard.

Note (3)

Net power advertised is the power available at the flywheel.

Note (4)

Note (5)

†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.

Note (6)

††Full compliance to EN474-3 and SAE J1197.

Note (7)

#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.

Note (8)

Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).

Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9EM 405/70 R18 tires and 0.95 m3 (1.2 yd3) general purpose bucket with bolt-on cutting edge or a class II fork carriage and tines (tire supplier variability can impact dimensions by 2%).

Dimensions - With SSL Coupler - Approximate

Height - Ground to Cab

8.75 ft 2670 mm

8.08 ft 2468 mm

Height: Ground to Beacon**

9.33 ft 2853 mm

8.67 ft 2651 mm

Height: Ground Axle Center**

1.67 ft 519 mm

1.5 ft 480 mm

Height - Ground Clearance

1 ft 320 mm

0.92 ft 300 mm

Length - Overall with Bucket

18.67 ft 5707 mm

18.08 ft 5527 mm

Length: Rear Axle to Bumper

4.5 ft 1391 mm

Length: Hitch to Front Axle

3.5 ft 1085 mm

Length - Wheel Base

7.08 ft 2170 mm

Clearance - Bucket at 45°

8.17 ft 2502 mm

7.75 ft 2385 mm

Clearance: Load over Height**

9.67 ft 2957 mm

9.5 ft 2900 mm

Clearance - Level Bucket

10.42 ft 3189 mm

9.92 ft 3030 mm

Height - Bucket Pin

11.08 ft 3404 mm

10.58 ft 3244 mm

Height: Overall**

14.08 ft 4304 mm

13.5 ft 4115 mm

Reach - Bucket at 45°

2.83 ft 872 mm

2.67 ft 822 mm

Carry Height: Bucket Pin

1.08 ft 353 mm

1 ft 311 mm

Dig Depth

0.45 ft 117 mm

0.275 ft 85 mm

Width - Bucket

6.75 ft 2080 mm

6.17 ft 1890 mm

Width - Tread Center

5.08 ft 1570 mm

4.58 ft 1420 mm

Turning Radius - Over Bucket

15.08 ft 4613 mm

14.67 ft 4481 mm

Width - Over Tires

6.5 ft 1990 mm

6 ft 1840 mm

Turning Radius: Outside of Tires

13.33 ft 4087 mm

13.08 ft 4007 mm

Turning Radius - Inside Tire

6.67 ft 2033 mm

6.92 ft 2128 mm

Rack Angle at Full Lift

53°

56°

Dump Angle at Full Lift

45°

Rack Angle at Carry

51°

Departure Angle - Degrees

30°

Articulation Angle - Degrees

39°

Operating Weight: Bucket ^

14617 lb 6632 kg

12628 lb 5730 kg

Tipping Load – Straight – ISO 14397-1 †

9581 lb 4347 kg

8610 lb 3907 kg

Tipping Load – Full Turn – ISO 14397-1 †

7985 lb 3623 kg

7158 lb 3248 kg

Operating Weight: Carriage and Tines ^^

14252 lb 6467 kg

12236 lb 5552 kg

Tipping Load - Straight †

8639 lb 3920 kg

7745 lb 3514 kg

80% of Tip: Firm and Level EN474-3 ††

5813 lb 2638 kg

5209 lb 2364 kg

Note (1)

Maximum gross and net torque measured at 1,600 rpm.

Note (2)

Net power ratings are tested at the reference conditions for the specified standard.

Note (3)

Net power advertised is the power available at the flywheel.

Note (4)

Note (5)

†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.

Note (6)

††Full compliance to EN474-3 and SAE J1197.

Note (7)

#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.

Note (8)

Dimensions - High Lift - With HPL-V Coupler - Approximate#

Height: Ground to Cab**

8.75 ft 2670 mm

8.08 ft 2468 mm

Height: Ground to Beacon**

9.33 ft 2853 mm

8.67 ft 2651 mm

Height: Ground Axle Center**

1.67 ft 519 mm

1.5 ft 480 mm

Height: Ground Clearance**

1 ft 320 mm

0.92 ft 300 mm

Length: Overall*

18.17 ft 5549 mm

17.58 ft 5369 mm

Length: Rear Axle to Bumper

4.5 ft 1391 mm

Length: Hitch to Front Axle

3.5 ft 1085 mm

Length: Wheel Base

7.08 ft 2170 mm

Clearance: Bucket at 45° *

8.5 ft 2615 mm

8.17 ft 2499 mm

Clearance: Load over Height**

9.67 ft 2957 mm

9.5 ft 2900 mm

Clearance: Level Bucket**

10.42 ft 3197 mm

9.92 ft 3038 mm

Height: Bucket Pin**

11.08 ft 3404 mm

10.58 ft 3244 mm

Height: Overall**

14.08 ft 4304 mm

13.5 ft 4115 mm

Reach: Bucket at 45° *

2.5 ft 770 mm

2.33 ft 725 mm

Carry Height: Bucket Pin

1.08 ft 353 mm

1 ft 311 mm

Dig Depth**

0.42 ft 109 mm

0.25 ft 77 mm

Width: Bucket

6.75 ft 2080 mm

6.17 ft 1890 mm

Width: Tread Center

5.08 ft 1570 mm

4.58 ft 1420 mm

Turning Radius: Over Bucket

14.92 ft 4570 mm

14.42 ft 4406 mm

Width: Over Tires

6.5 ft 1990 mm

6 ft 1840 mm

Turning Radius: Outside of Tires

13.33 ft 4087 mm

13.08 ft 4007 mm

Turning Radius: Inside of Tires

6.67 ft 2033 mm

6.92 ft 2128 mm

Rack Angle at Full Lift

53°

56°

Dump Angle at Full Lift

45°

Rack Angle at Carry

51°

Departure Angle - Degrees

30°

Articulation Angle - Degrees

39°

Operating Weight: Bucket ^

14617 lb 6632 kg

12628 lb 5730 kg

Tipping Load - Straight - ISO 14397-1 †

10604 lb 4812 kg

9756 lb 4427 kg

Tipping Load - Full Turn - ISO 14397-1 †

8947 lb 4060 kg

8157 lb 3701 kg

Operating Weight: Carriage and Tines ^^

14252 lb 6467 kg

12236 lb 5552 kg

Tipping Load - Straight †

8639 lb 3920 kg

7745 lb 3514 kg

80% of Tip: Firm and Level EN474-3 ††

5813 lb 2638 kg

5209 lb 2364 kg

Note (1)

Maximum gross and net torque measured at 1,600 rpm.

Note (2)

Net power ratings are tested at the reference conditions for the specified standard.

Note (3)

Net power advertised is the power available at the flywheel.

Note (4)

Note (5)

†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.

Note (6)

††Full compliance to EN474-3 and SAE J1197.

Note (7)

#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.

Note (8)

Dimensions - High Lift - With SSL Coupler - Approximate

Height: Ground to Cab**

8.75 ft 2670 mm

8.08 ft 2468 mm

Height: Ground to Beacon**

9.33 ft 2853 mm

8.67 ft 2651 mm

Height: Ground Axle Center**

1.67 ft 519 mm

1.5 ft 480 mm

Height: Ground Clearance**

1 ft 320 mm

0.92 ft 300 mm

Length: Overall*

18.17 ft 5549 mm

17.58 ft 5369 mm

Length: Rear Axle to Bumper

4.5 ft 1391 mm

Length: Hitch to Front Axle

3.5 ft 1085 mm

Length: Wheel Base

7.08 ft 2170 mm

Clearance: Bucket at 45° *

8.5 ft 2615 mm

8.17 ft 2499 mm

Clearance: Load over Height**

9.67 ft 2957 mm

9.5 ft 2900 mm

Clearance: Level Bucket**

10.42 ft 3197 mm

9.92 ft 3038 mm

Height: Bucket Pin**

11.08 ft 3404 mm

10.58 ft 3244 mm

Height: Overall**

14.08 ft 4304 mm

13.5 ft 4115 mm

Reach: Bucket at 45° *

2.5 ft 770 mm

2.33 ft 725 mm

Carry Height: Bucket Pin

1.08 ft 353 mm

1 ft 311 mm

Dig Depth**

0.42 ft 109 mm

0.25 ft 77 mm

Width: Bucket

6.75 ft 2080 mm

6.17 ft 1890 mm

Width: Tread Center

5.08 ft 1570 mm

4.58 ft 1420 mm

Turning Radius: Over Bucket

14.92 ft 4570 mm

14.42 ft 4406 mm

Width: Over Tires

6.5 ft 1990 mm

6 ft 1840 mm

Turning Radius: Outside of Tires

13.33 ft 4087 mm

13.08 ft 4007 mm

Turning Radius: Inside of Tires

6.67 ft 2033 mm

6.92 ft 2128 mm

Rack Angle at Full Lift

53°

56°

Dump Angle at Full Lift

45°

Rack Angle at Carry

51°

Departure Angle - Degrees

30°

Articulation Angle - Degrees

39°

Operating Weight: Bucket ^

14617 lb 6632 kg

12628 lb 5730 kg

Tipping Load - Straight - ISO 14397-1 †

10604 lb 4812 kg

9756 lb 4427 kg

Tipping Load - Full Turn - ISO 14397-1 †

8947 lb 4060 kg

8157 lb 3701 kg

Operating Weight: Carriage and Tines ^^

14252 lb 6467 kg

12236 lb 5552 kg

Tipping Load - Straight †

8639 lb 3920 kg

7745 lb 3514 kg

80% of Tip: Firm and Level EN474-3 ††

5813 lb 2638 kg

5209 lb 2364 kg

Note (1)

Maximum gross and net torque measured at 1,600 rpm.

Note (2)

Net power ratings are tested at the reference conditions for the specified standard.

Note (3)

Net power advertised is the power available at the flywheel.

Note (4)

Note (5)

†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.

Note (6)

††Full compliance to EN474-3 and SAE J1197.

Note (7)

#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.

Note (8)