1300 881 064 
FIND A BRANCH
DIGITAL TOOLS
Product Compare
Please use a desktop browser to compare products.
Operating Specifications 
Rated Payload - Loose Material (Standard)
20 ton (US)
22 t
14 ton (US)
12.7 t
Rated Payload - Loose Material (High Lift)
22 ton (US)
20 t
12.1 ton (US)
11 t
Rated Payload - Standard (Quarry Face)
17.5 ton (US)
15.9 t
11 ton (US)
10 t
Rated Payload - High Lift (Quarry Face)
17.5 ton (US)
15.9 t
11 ton (US)
10 t
Bucket Capacity Range
8,6 m³ – 10,0 m³ (11,25 yd³ – 13,0 yd³)
5.0-10.3 m³ (6.5-13.5 yd³)
4.7-13 m3 (6.2-17 yd3)
Cat Truck Match - Standard
773-775
770/735/740/745
770 - 772
Cat Truck Match - High Lift
775-777
772/773
773 - 775
Operating Weight
178517 lb
80974 kg
112574 lb
51062 kg
Engine
Net Power
699 hp
521 kW
Engine Model
C27 Cat®
Cat® C15
Cat® C18
Bore
5.4 in
137.2 mm
5.4 in
137 mm
5.7 in
145 mm
Stroke
6 in
152.4 mm
6.75 in
171.5 mm
7.2 in
183 mm
Displacement
1649.5 in³
27.03 l
927 in²
15.2 l
1105 in³
18.1 l
Torque Rise
18 %
18 %
16%
58 %
58 %
Rated Speed
1,800/min
2000
1700/rpm
Rated Speed - Net Power - SAE J1349 - Standard Ambient
699 hp
521 kW
Rated Speed - Net Power - SAE J1349 - High Ambient
648 hp
483 kW
Rated Speed - Gross - SAE J1995
766 hp
571 kW
Net Power - SAE J1349:2011
699 hp
521 kW
373 hp
278 kW
538 hp
401 kW
Emissions
U.S. EPA Tier 4 Final OR Tier 2 Equivalent
Rated Speed - Gross - ISO 14396
752 hp
561 kW
Gross - ISO 14396
752 hp
561 kW
Peak Torque - 1,200 rpm
2624 lb/ft
3557 N·m
2104 lbf·ft
2852 N·m
Buckets
Bucket Capacities
7,4-14,9 m³ (9,7-19,5 yd³)
Transmission
Transmission Type
Cat-Planetenlastschaltgetriebe
Cat planetary power shift
Cat planetary powershift
Forward - 1
4.5 mile/h
7.3 km/h
5 mile/h
7.3 km/h
4.0 mile/h
6.5 km/h
Forward - 2
8.3 mile/h
13.3 km/h
8 mile/h
12.2 km/h
7.2 mile/h
11.6 km/h
Forward - 3
14.2 mile/h
22.9 km/h
12.7 mile/h
20.4 km/h
Reverse - 1
4.9 mile/h
7.9 km/h
5 mile/h
7.6 km/h
4.7 mile/h
7.5 km/h
Reverse - 2
9.1 mile/h
14.7 km/h
8 mile/h
13.6 km/h
8.3 mile/h
13.3 km/h
Reverse - 3
15.5 mile/h
24.9 km/h
14.4 mile/h
23.2 km/h
Direct Drive - Forward 1
Lock-up disabled
Lock-up disabled
Direct Drive - Forward 2
8.5 mile/h
13.7 km/h
8 mile/h
12.7 km/h
7.8 mile/h
12.5 km/h
Direct Drive - Forward 3
15.2 mile/h
24.5 km/h
14 mile/h
22 km/h
13.9 mile/h
22.3 km/h
Direct Drive - Reverse 1
5.4 mile/h
8.7 km/h
5.0 mile/h
8.0 km/h
Direct Drive - Reverse 2
9.6 mile/h
15.4 km/h
9 mile/h
14.1 km/h
8.9 mile/h
14.3 km/h
Direct Drive - Reverse 3
16.4 mile/h
26.4 km/h
16 mile/h
25 km/h
15.8 mile/h
25.5 km/h
Note
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
- All dimensions are approximate.
- Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester)* – 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. • Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** • For pre-Tier 4 engines: Cat engines are compatible with diesel fuel blended with the following lower-carbon intensity fuels** up to: – 100% biodiesel FAME (fatty acid methyl ester)* – 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * For use of blends higher than 20% biodiesel, consult your Cat dealer. ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Axles
Front
Fixed
Fixed
Fixed
Rear
Trunnion
Trunnion
Trunnion
Oscillation Angle
8.5°
±12.5°
13 °
Hydraulic Cycle Times
Raise
8.2 s
8.2 s
9 s
9 s
8.0 s
8.0 s
Dump
2.9 s
2.9 s
3.5 s
3.5 s
2.2 s
2.2 s
Lower Float Down
3.6 s
3.6 s
4.3 s
4.3 s
3.5 s
3.5 s
Lower
3.7 s
3.7 s
5.2 s
5.2 s
Total Hydraulic Cycle Time - Empty Bucket
13.8 s
13.8 s
18.2 s
18.2 s
Rack Back
4.3 s
4.3 s
4.5 s
4.5 s
4.5 s
4.5 s
Service Refill Capacities
Fuel Tank
294.3 gal (US)
1114 l
141 gal (US)
535 l
188 gal (US)
712 l
Cooling System
54.9 gal (US)
208 l
31.7 gal (US)
120 l
Transmission
29.1 gal (US)
110 l
20 gal (US)
75 l
24.3 gal (US)
92 l
Hydraulic Tank - Implement and Hydraulic Fan
68.9 gal (US)
261 l
Differential - Final Drives - Rear
68.9 gal (US)
261 l
49.1 gal (US)
186 l
Differential - Final Drives - Front
71.6 gal (US)
271 l
49.1 gal (US)
186 l
Hydraulic Tank - Steering and Braking
34.9 gal (US)
132 l
Engine Crankcase
20 gal (US)
75.7 l
Hydraulic System Factory Fill
210 gal (US)
795 l
87 gal (US)
330 l
125.5 gal (US)
475 l
Note
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
- All dimensions are approximate.
- Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester)* – 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. • Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** • For pre-Tier 4 engines: Cat engines are compatible with diesel fuel blended with the following lower-carbon intensity fuels** up to: – 100% biodiesel FAME (fatty acid methyl ester)* – 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * For use of blends higher than 20% biodiesel, consult your Cat dealer. ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Hydraulic System - Lift/Tilt
Pilot System
Open loop and pressure reducing
Variable displacement piston
Maximum Flow at 1,800 rpm (1)
216 gpm
817 L/min
Cylinders, Double Acting - Lift, Bore and Stroke
235 mm × 1287 mm (9.3 in × 50.7 in)
210 mm × 1050 mm (8.7 in × 41.3 in)
Relief Valve Setting - Lift/Tilt
4786 psi
33000 kPa
4050 psi
27900 kPa
4757 psi
32800 kPa
Maximum Flow at 1,800 rpm (2)
22.2 gpm
84 L/min
Relief Valve Setting - Main
507 psi
3500 kPa
551 psi
3800 kPa
Lift/Tilt System - Circuit
Positive flow control
Load Sense
EH- Positive Flow Control, Flow Sharing
Cylinders, Double Acting - Tilt, Bore and Stroke
292.1 mm × 820 mm (11.5 in × 32.3 in)
266 mm × 685 mm (8.7 in × 27 in)
Lift/Tilt System
Variable displacement piston
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008)
69 dB(A)
69 dB(A)
Machine Sound Level (ISO 6395:2008)
113 dB(A)
113 dB(A)
Sound Performance - Standard
Machine Sound Level (ISO 6395:2008)
113 dB(A)
113 dB(A)
Operator Sound Level (ISO 6396:2008)
69 dB(A)
69 dB(A)
Hydraulic System - Steering
Total Steering Angle
70°
70°
86 °
Steering System - Pump
Piston, variable displacement
Piston, variable displacement
Piston, variable displacement
Steering System - Circuit
Pilot, load sensing
Load Sense
Pilot, load sensing
Steering
ISO 5010: 2007
Relief Valve Setting - Steering
4641 psi
32000 kPa
4351 psi
30000 kPa
Maximum Flow at 1,400 rpm
94.5 gpm
358 L/min
52 gpm
200 L/min
Operator's Cab
ROPS/FOPS
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Brakes
Brakes
ISO 3450: 2011
ISO 3450:2011
ISO 3450:2011