16

    
• Reduce downtime and operating cost through improved serviceability, fuel economy and reduced maintenance, maximizing availability.

    

• Major components are modular, so most can be removed and reinstalled without disturbing other components for peak repair efficiency.

    

• C13 engine has been optimized to be as efficient without compromising performance. Eco mode can be activated to control high engine idle speed and ensure the engine is performing as efficiently as possible, offering additional fuel savings.

    

• Center shift section of the front frame is a heavy-duty steel casting improving stress distribution for enhanced durability.

    

• Rear frame structure is lengthened providing easy access to components in the engine enclosure as well as improved machine balance.

    

• Front axle steering cylinder enhances durability and hydraulic lines are routed to improve reliability.

    

• Modular cooling package provides simple removal and installation of components on the cooling system reducing service time.

    

• Engine enclosure doors provide complete access to the engine without any enclosure post.

    

• Extended maintenance intervals reduce the number of touches and downtime.

    

• Fluid monitoring systems help prevent critical components from damage when levels are low.

    

• Information Display in cab shows service/maintenance concerns and diagnostic codes are logged.

• Motor graders have a direct impact on how productively all other mining machines operate – in particular in their role in haul road maintenance. The 16is optimized exactly to this goal:
• Additional weight along with adjusted weight balance offers enhanced performance improving traction and the ability to keep ground speed, especially when carrying a large load.
• Available with three variations of the C13 engine depending upon sales region.
• Emissions reduction technology is transparent, with no action required from the operator.
• Multi-color / touch screen information display is the operator’s gateway to monitoring machine performance and provides convenient way of modifying machine parameters to tailor performance to the current task. Assist in providing service information for troubleshooting.
• Cat Product Link™ Elite integrates into the machine, taking guesswork out of equipment management. Provides easy access to machine location, hours, fuel usage, idle time and event codes via the online VisionLink® user interface helping you manage your fleet and operating costs.
• Manage your fleet of machines while reducing fuel burn with Cat Production Measurement System option. The Efficiency Coach and Application Segmentation work together to monitor operators and machines simultaneously. Measure your jobsite’s efficiency and productivity from anywhere on the website.

• Caterpillar considers the safety of everyone in, on or around Cat equipment when developing products or enhancing safety features.
• The 16has safety features including –

1. Access to Tandem
2. Rear View Camera
3. Seat Belt Indicator
4. Access Platform – optional
5. Service Access Platform – optional
6. Fire Suppression Ready System – optional

• Cat dealers are committed to helping you succeed, ensuring you have the right machine for the job, making parts available, operator training and providing a wide range of versatile work tools.

NOTE

1. Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

1. Adjustable Electric Arm rest
2. Adjustable wrist rest
3. Air conditioner with heater
4. Articulation, automatic Return-to-Center
5. Centershift pin indicator
6. Coat hook
7. Cup holder
8. Display, digital speed and gear
9. Doors, left and right side with wiper
10. Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
11. Gauges, machine level
12. Information display touch screen
13. Joystick gear selection
14. Joystick hydraulic controls for implements, steering, transmission
15. Ladders, cab, left and right side
16. Lights, left and right side lights
17. Lights, night time cab
18. Meter, hour, digital
19. Mirror, inside rearview, wide angle
20. Power port, 12V
21. Radio ready, entertainment
22. ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
23. Seat, cloth-covered, comfort air suspension
24. Storage compartments
25. Throttle control, electronic

POWER TRAIN

1. Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector
2. Air-to-air after cooler (ATAAC)
3. Auto Diff Lock
4. Belt, serpentine, automatic tensioner
5. Brake wear indication
6. Brakes, oil disc, four-wheel, hydraulic
7. Consistent Power to ground
8. Critically Low Fluid Level Monitoring System
9. Differential, lock/unlock
10. Drain, engine oil, high speed
11. Electronic over speed protection
12. Engine ECO Mode: Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards
13. Engine, compression brake
14. Ether starting aid
15. Fuel tank, fast fill, ground level
16. Fuel-water separator
17. Hydraulic Demand Fan
18. Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3)
19. OK-to-Start
20. Optimized VHP
21. Parking brake – multi disc, sealed, oil-cooled
22. Priming pump, fuel
23. Rear axle, modular
24. Sediment drain, fuel tank
25. Three variations of the C13 engine. One meets U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards and are available for lesser or non-regulated countries, depending on the emission standards of the specific country.
26. Transmission, 8F/6R, power shift
27. VIMS no telematics

ELECTRICAL

1. Alternator, 150 ampere, sealed
2. Batteries, maintenance free, heavy duty, 1,400 CCA
3. Breaker panel
4. Electrical system, 24V
5. Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front
6. Product Link
7. Starter, electric, heavy duty

SAFETY

1. Alarm, back up
2. Ground level engine shutdown
3. Hammer (emergency exit)
4. Horn, electric
5. Lockout, hydraulic implement for roading
6. Operator not present monitoring System
7. Paint, glare reducing – top of front frame, rear enclosure an ripper cylinders
8. Rearview camera
9. Seat belt indicator
10. Seat belt, retractable 76 mm (3 in)
11. Secondary steering
12. Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (2)
13. Windows, tempered: – Left and right side wipers – Rear with intermittent wiper

OTHER STANDARD EQUIPMENT

1. 3-Bolt blade Bracket
2. AccuGrade ARO
3. Accumulators, blade lift
4. Brake accumulators, dual certified
5. Cat Grade Control Cross Slope
6. CD ROM Parts Book
7. Clutch, circle drive slip
8. Cutting edges, curved DH-2 steel: – 203 mm × 25 mm (8 in × 1 in) – 19 mm (3∕4 in) mounting bolts
9. Doors (four), engine compartment, (two left, two right hand) locking
10. Doors, two service, left and right side
11. Drawbar – six shoe with replaceable wear strips
12. End bits, 16 mm (5∕8 in) DH-2 steel, 19 mm (3∕4 in) mounting bolts
13. Fast fill fuel, 567.8 L/min (150 gpm)
14. Fluid check
15. Frame, articulated, with safety lock
16. Hydraulics, load-sensing
17. Metallic Fuel tank, 496 L (131 gal)
18. Metallic DCM wear strips
19. Modular cooling package
20. Moldboard: – 4880 mm × 787 mm × 25 mm (16 ft × 31 in × 1 in) – Hydraulic side shift and tip
21. Radiator, two cleanout access doors
22. Rear bumper
23. Rear tandem access steps and hand bars
24. S∙O∙S ports: engine, hydraulic, transmission, coolant
25. Tandem walkway
26. Top adjust circle wear strips
27. Tow hitch (not available with ripper)

TIRES, RIMS, AND WHEELS

1. A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight

FLUIDS

1. Extended Life Coolant to –35° C (–31° F)

WORK TOOLS/G.E.T.

1. 4.9 m (16 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)

NOTE

1. Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

1. Air horn
2. Comfort package
3. Heated door
4. Mirrors high visibility
5. Mirrors, outside heated 24V
6. Mirrors, outside mounted
7. Seat heated
8. Seat heated/ventilated
9. Windows cleaning platform and ladders left-right hand side

POWER TRAIN

1. Transmission, autoshift

GUARDS

1. Debris guard
2. Front axle cylinder guard
3. Rear fenders
4. Sound suppression, engine enclosure and transmission
5. Transmission guard

ELECTRICAL

1. Light, LED, warning strobe
2. Lights front LED
3. Lights, front headlights high
4. Lights, front headlights low
5. Mounting, for warning light
6. Service lights
7. Working lights halogen
8. Working lights LED

SAFETY

1. Additional monitor for rearview camera
2. Enhanced access platform
3. Fire suppression ready
4. Machine Security System Key
5. Service access platform

OTHER ATTACHMENTS

1. Auto-lube, Centro-matic
2. Auto-lube, ripper enhancement
3. Control, blade, variable float
4. Heater, engine coolant, 120V
5. Heater, engine coolant, 240V
6. Hydraulic arrangements with additional hydraulic valves Base+1
7. Hydraulic arrangements with additional hydraulic valves Base+5
8. Product Link Elite dual
9. Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)
10. Weather, Cold Plus package

WORK TOOLS/G.E.T.

1. 4.9 m (16 ft) blade with flat cutting edge 254 mm × 35 mm (10 in × 1 3∕8 in)
2. Push block, counterweight
3. Ripper, rear
4. Tooth, ripper

FLUIDS

1. Coolant, –51° C (–60° F)