Maximum water flow
1800 gal(US)/min
6814 L/min
Water per spray head (minimum)
35 gal(US)/min
132.5 L/min
Water per spray head (maximum)
600 gal(US)/min
2270 L/min
Spray head opening range (minimum)
0.04 in
1 mm
Spray head opening range (maximum)
0.75 in
19 mm
Maximum size debris flushed through spray head
0.75 in
19 mm
Spray system hydraulic tank capacity
7.25 gal (US)
27.5 l
Maximum number of rear spray heads
5
Minimum number of rear spray heads (recommended 3)
2
Minimum number of front/side spray heads
2
Maximum number of front/side spray heads
Maximum water from cannon (idle)
600 gal(US)/min
2271 L/min
Maximum water from cannon (high idle)
1650 gal(US)/min
6246 L/min
Maximum cannon spray distance
200 ft
61 m
Type
Wet water pump/hydraulic motor coupling
Note
Operator selectable coverage: 0.2 - 0.8 L/m² (4 kph - 40 kph) / 0.05 - 0.2 gal/ft² (3 mph - 25 mph). Coverage rates above 0.6 L/m² may not be available at higher speeds depending on head count and configuration.
Note (1)
Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Note (2)
The Auto Mode setting controls water coverage and automatically adjusts to the number of spray heads being used — independent of ground speed. This is an exclusive feature designed into the Cat WDS software to help water more efficiently. Water flow is continually adjusted during operation to conserve water and achieve desired coverage and flow rate.
Note (3)
Alternatively, manual mode allows the operator to set a water flow rate that is constant regardless of ground speed. This mode is not recommended for daily operation and will reduce watering efficiency and may increase fuel usage.
Note (4)
Spray heads on competitive water distribution systems require tools and maintenance to change flow and spray pattern. Caterpillar is the only company to have variable active spray heads to regulate water spray.
Note (5)
Cannon performance depends on nozzle orifice and pipe size.