14

    
• Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases engine rpm systematically when grader stabilizes.

    

• Optional Cat Grade with Cross Slope helps maintain desired cross slope by automatically controlling one side of the blade.

    

• Optional Cat Grade uses positioning and guidance technologies, machine sensors, and automatic blade control to help get to grade faster, easier, and more efficiently.

    

• Optional Auto Articulation allows you to articulate automatically while steering in tight spaces or around curves, obstacles, and turnarounds.

    

• Manage your fleet of machines while reducing fuel burn with Cat Production Measurement System option. The Efficiency Coach and Application Segmentation work together to monitor operators and machines at the same time. Measure your jobsite’s efficiency and productivity from anywhere on the website.

• Cat C13 engine meets U.S. EPA Tier 4 Final/EU Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent emission standards, depending on emission standards of specific country.
• Standard Economy Mode can be turned on to limit maximum engine speed which helps reduce fuel consumption.
• Standard VHP Plus provides ideal amount of power in all gears.
• Standard Automatic Differential Lock unlocks differential during a turn and re-locks when straight for easier operation and improved power train protection.

    
• Load-sensing system and advanced electro hydraulics give operator superior implement control and hydraulic performance.

    

• Proportional Priority Pressure-Compensating valves have different flow rates for head and rod ends of cylinder so machine responds consistently and predictably.

    

• Balanced hydraulic flow is proportioned to ensure all implements will operate at the same time without slowing engine or speed of some implements.

• Simple, intuitive joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue.
• Optional Advanced Control Joysticks allow operator to control automated grading solutions efficiently and safely without removing hands from the joysticks.
• Selectable blade lift modes – Fine, Normal, or Coarse – allow operator to match application requirements.
• Articulation Return-to-Center automatically returns machine to a straight frame position from any angle with the touch of a button.

• Optional rear vision camera enhances sight to rear of machine.
• Electrical disconnect and engine shutoff switches are ground level.
• Operator Presence System keeps parking brake engaged and hydraulic implements disabled until operator is seated and machine is ready for operation.
• Hydraulic Lockout disables all implement functions while still providing machine steering control – especially useful while roading.
• Optional seat belt indicator promotes safe operating habits.

• Convenient access from the top of the circle to the patented top-adjust wear strips and inserts make them easy to add or replace.
• Shim less Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.

NOTE

1. Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

1. Joystick, power adjustable armrests
2. Air conditioner with heater
3. Centershift pin indicator
4. Coat hook
5. Cup holder
6. Display, digital speed and gear
7. Doors, left and right side with wiper
8. Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
9. Gauges, machine level
10. Message display
11. Joystick gear selection
12. Joystick hydraulic controls for implements, steering, transmission
13. Ladders, cab, left and right side
14. Lights, left and right side lights
15. Lights, night time cab, LED
16. Meter, hour, digital
17. Mirror, inside rearview, wide angle
18. Power port, 12V
19. Radio ready, entertainment
20. ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
21. Seat, mechanical suspension, cloth
22. Storage compartments
23. Throttle control, electronic

POWER TRAIN

1. Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector
2. Articulation, automatic Return-to-Center
3. Air-to-Air After Cooler (ATAAC)
4. Auto Diff Lock
5. Brake wear indication
6. Brakes, oil disc, four-wheel, hydraulic
7. Consistent power to ground
8. Monitoring system
9. Clutch, circle drive slip
10. Differential, lock/unlock*
11. Drain, engine oil, ecology
12. Demand fan, hydraulic
13. Engine ECO Mode
14. Ether starting aid
15. Fuel tank, ground level
16. Fuel-water separator
17. Hydraulic demand fan
18. Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent)
19. Optimized VHP
20. Parking brake – multi disc, sealed, oil-cooled
21. Priming pump, fuel
22. Sediment drain, fuel tank
23. Three variations of the C13 engine. One meets Tier 4 Final/Stage V emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country.
24. Transmission, 8F/6R, power shift, direct drive

ELECTRICAL

1. Alternator, 150 ampere, sealed
2. Batteries, maintenance free, HD, 1,125 CCA
3. Breaker panel
4. Electrical system, 24V*
5. Belt, serpentine, automatic tensioner
6. Lights: reversing (LED), roof-mounted roading, stop and tail (LED)
7. Product Link
8. Starter, electric
9. Service lights, enclosure, rear, LED

SAFETY

1. Alarm, back up
2. Ground level engine shutdown
3. Hammer (emergency exit)
4. Horn, electric
5. Lockout, hydraulic implement for roading
6. Operator Not Present Monitoring system
7. Paint, glare reducing – top of front frame, rear enclosure and ripper cylinders
8. Seat belt, retractable 76 mm (3 in)
9. Secondary steering
10. Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)

NOTE

1. Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

1. Air horn
2. Heated door
3. Mirrors high visibility
4. Mirrors, outside heated 24V
5. Mirrors, outside mounted
6. Seat, heated
7. Seat, heated/ventilated
8. Rearview camera
9. Seat belt indicator

POWER TRAIN

1. Transmission, autoshift
2. Engine, compression brake

TECHNOLOGY

1. Cat GRADE with Cross Slope
2. Stable Blade
3. Advanced Control Joysticks
4. Auto Articulation

GUARDS

1. Debris guard
2. Front axle cylinder guards
3. Rear fenders
4. Sound suppression, engine enclosure and transmission
5. Transmission guard
6. Accumulators, blade lift
7. Fast fill fuel, 378.5 L/min (100 gal/min)
8. Metallic DCM wear strips

ELECTRICAL

1. Light, LED, warning strobe
2. Lights, front headlights high
3. Lights, front headlights low
4. Mounting, for warning light
5. Working lights halogen
6. Working lights LED

SAFETY

1. Additional rearview camera and monitor
2. Machine security system key

OTHER ATTACHMENTS

1. Moldboard, 4.9 m (16 ft)
2. Heater, engine coolant, 120V
3. Heater, engine coolant, 240V
4. Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
5. Product Link satellite, cellular
6. Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
7. Snow wing, mounting frame ready
8. Fast fill

WORK TOOLS/G.E.T.

1. 4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
2. Push block, counterweight
3. Ripper, rear
4. Tooth, ripper

FLUIDS

1. Coolant, -51 degrees C (-60 degrees F)