320

Machine Setup Simplification

    
• At the touch of fingertips and navigating user-friendly icons, the latest operator oriented User Interface (UI) maximizes uptime and gets crews to work without delay. From re-ordering work tool lists to creating new work tool combinations as needed, operators can quickly set up machines and easily access information.

    

• The interface allows operators to maintain accuracy and makes the most of every second of their shift. Adding the ability to input couplers and attachments into the system makes setting up work tool combinations highly efficient by significantly reducing calibration time. It also eliminates the need to measure up again when changing Cat® work tool attachments and makes it manageable for a single person to check and adjust for bucket wear.

Cat® Grade 3D Ready

    
• The Cat Grade 3D Ready option includes all the hardware required for the Grade with 3D system, installed and tested from the factory. This option provides an easier upgrade path for customers who want to add Grade with 3D after their initial purchase. To activate, contact your Cat Dealer to purchase the required 3D software licenses. Licenses can be installed remotely or manually loaded onto the machine.

Cat Payload and Advanced Payload*

    
• Cat Payload provides operators with on-the-go weighing to help them hit load targets and avoid overloading, underloading, or misloading materials. Advanced Payload is a system upgrade that offers expanded features and capabilities, including custom tags, daily totals, and electronic ticketing. Combine Payload with VisionLink™** to analyze jobsites and individual assets for remote management of production targets and key metrics.

*Payload technologies are not legal for trade.
**VisionLink subscription required. 

Not all features are available in all regions. Please check with your local Cat dealer for specific offering availability in your area. Build Number: 07H

    
• Leverage standard Cat® technologies to streamline operating efficiency — help reduce fuel consumption and daily maintenance costs with VisionLink, Cat Assist, Cat Payload, and more.

    

• Match the excavator to the job using power modes including Smart mode that automatically matches engine and hydraulic power to your digging conditions.

    

• The advanced hydraulic system provides the optimum balance of power and efficiency while giving you the control you need for your precise digging requirements.

    

• The electronically controlled, twin-turbocharged engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards using a transparent after treatment system that requires no operator input or downtime.

    

• Auxiliary hydraulic options give you the versatility to use a wide range of Cat attachments.

    

• Advansys™ bucket tips increase penetration and improve cycle times. Tip changes can be done quickly with a simple lug wrench instead of a hammer or special tool, improving safety and uptime.

    

• Don’t let the temperature stop you from working. The excavator has a standard high ambient temperature capability of 52º C (125º F) and cold start capability of -32º C (-25º F).

    
• The latest operator oriented User Interface (UI) has been designed to maximize uptime by allowing operators to easily reorder work tool lists and quickly create new work tool combinations. It also eliminates the need to measure up again when changing Cat® work tool attachments and makes it manageable for a single person to check and adjust for bucket wear.

    

• Leverage standard Cat Grade with 2D system with indicate-only and laser capability to help boost productivity.

    

• Want a 3D system to improve your digging results? Caterpillar’s single antenna global navigation satellite system (GNSS) makes it easy by giving you visual and auditory guidance to grade. Plus, you can create and edit designs on the touchscreen monitor while you’re on the job. If your application calls for a dual antenna system, it’s easy to upgrade.

    

• Upgrade to our dual antenna GNSS for maximum grading efficiency. The system lets you create and edit designs on the touchscreen monitor while you’re on the job, or you can have the plan design sent to the excavator to make your work easier. Plus, you get added benefits of avoidance zones, cut and fill mapping, lane guidance, and augmented reality along with advanced positioning capability.

    

• All Cat Grade systems are compatible with radios and base stations from Trimble, Topcon, and Leica. Already invested in a grade infrastructure? You can install grade systems from Trimble, Topcon, and Leica onto the machine.

    

• The Cat Grade 3D Ready option includes all the hardware required for the Grade with 3D system, installed and tested from the factory. Activation requires the purchase of additional 3D software licenses.

    

• Standard Grade Assist helps you stay on grade – simply and effortlessly – with single-lever digging.

    

• Keep the tracks on ground in lifting and hard digging with Boom Assist.

    

• Set your desired bucket angle and let Bucket Assist automatically maintain the angle in sloping, leveling, fine grading, and trenching applications.

    

• Automatically stop excavator swing at operator-defined set points in truck loading and trenching applications with Swing Assist, which will help you use less effort and consume less fuel.

    

• Cat Payload helps you achieve precise load targets to improve your operating efficiency. Pick up a load of material–with a bucket and thumb combination or grapple and clamshell attachments–and get a real-time weight estimate without swinging.

    

• Advanced Payload is a system upgrade that offers expanded features and capabilities, including custom tags, daily totals, and electronic ticketing.

    

• Combine Payload with VisionLink™ and remotely manage your production targets.

    

• Optional Operator Coaching is an in-cab system that recognizes specific opportunities for operators to be more productive and prevent unnecessary machine wear and tear.

    
• VisionLink™ provides actionable data insights for all assets – regardless of fleet size or equipment manufacturer.* Review equipment data from your desktop or mobile device to maximize uptime and optimize assets. Equipment management features provide up-to-date asset tracking of your entire fleet. You can track asset location, operating hours, fuel level, health issues, and overall utilization. Monitor equipment health with fault codes, fluid analysis, and inspection due dates. It’s all about making informed, data-based decisions to help reduce operating costs. Productivity management features enable you to analyze overall job site performance. You’ll be able to track tonnage moved, production targets, and payload, as well as Grade 3D and compaction data. These vital metrics help you to reduce costs and improve jobsite operational efficiency.

    

• Cat® Inspect is a mobile application that allows you to easily perform digital preventative maintenance (PM) checks, inspections, and daily walkarounds. Inspections can easily be integrated with other Cat data systems like VisionLink so you can keep a close eye on your fleet.

    

• Remote Troubleshoot is a mobile application that allows your Cat dealer to perform diagnostic testing on your connected machine remotely to help ensure that issues are resolved quickly and with less downtime.

    

• Remote Flash is a mobile application that allows you to update onboard software without a technician being present, allowing you to initiate software updates when convenient, increasing your overall operating efficiency.

    

• The Cat PL161 attachment locator allows you to track attachments across all worksites, reduce the number of lost attachments, and plan for attachment maintenance and replacement. The work tool recognition** feature automatically adjusts machine settings based on the selected tool.

*Data field availability can vary by equipment manufacturer.
** Recognition feature available on select excavator models. Consult your Cat dealer for details.

    
• Cab options let you choose the level of comfort you need.

    

• Enjoy wide spacing between consoles for a more spacious comfortable environment.

    

• Sit in a wide seat that adjust for operators of all sizes (heated and heated/cooled options are available).

    

• Get in and out of the cab easier using the tip-up left console (Deluxe and Premium cabs only).

    

• Control the excavator comfortably with easy-to-reach controls located in front of you. Standard automatic climate control keeps you at the right temperature throughout your shift.

    

• Stow your gear with plenty of in-cab storage behind the seat, overhead, and in the consoles.

    

• The standard radio has USB ports and Bluetooth® technology enabled to connect your device and make hands-free calls.

    
• Protect hydraulic components in cold weather. The auto warm-up feature speeds hydraulic oil warming in cooler temperatures.

    

• The fuel system is protected from contamination of fuel by three levels of filtration.

    

• Bottom guarding protects engine and hydraulic components from damage while swinging and traveling.

    

• The hydraulic tank with an oval shape designed to improve stress resistance.

    

• The strong X-structure lower frame carries loads from the excavator’s upper structure to the track.

    

• Travel motor hydraulic lines are routed inside of the frame to protect them from damage.

    

• The sloped track frame design prevents mud and debris from accumulating and damaging tracks.

    

• The grease lubricated tracks have grease sealed between the pin and bushing to prevent debris from entering and reducing life.

    

• The track rollers are rebuild-able and sealed to prevent dirt and debris causing wear of internal components.

    

• A bolt-on track guiding guard helps maintain track alignment while traveling or working on slopes.

    
• Start the engine with a push button; use a Bluetooth® key fob, or the Operator ID passcode.

    

• Program each joystick button, including response and pattern, using Operator ID; the machine will remember what you set each time you go to work.

    

• Program up to four depth and slope offsets so you can easily get to grade without a grade checker – a real time saver and safety enhancer on the jobsite.

    

• Navigate quickly on the standard high-resolution 203 mm (8 in) touchscreen monitor, or with the optional 254 mm (10 in) touchscreen monitor, or with the aid of the jog dial control.

    

• Protect your hammer tool from overheating and rapid wear. Auto hammer stop warns you after 15 seconds of continuous firing and then automatically shuts it off after 30 seconds – all to extend the tool’s service life.

    

• Not sure how a function works or how to maintain the excavator? Always have the operator’s manual at your fingertips in the touchscreen monitor.

    

• Continuously improved user interface allows for intuitive navigation, minimizing performance interruption with the easy-to-use touchscreen menu.

    

• Use the in-monitor QR code to learn about machine and technology features through a full suite of “how-to” videos.

    

• The Cat® PL161 attachment locator is a Bluetooth device designed to let users know where their attachments are across all worksites, reduce the number of lost attachments, and plan for attachment maintenance and replacement. The PL161 integrates easily into VisionLink™ for full fleet management of machines and attachments from one smartphone or tablet dashboard to view location and tracking details.

    

• Save more time and energy with the available work tool recognition feature. A simple shake of the attached tool confirms its identity and ensures all the attachment settings (pressure, flow, and dimensions) are correct so you can work quickly and efficiently.*

    

• Auto Dig Boost increases power by up to 8% for better bucket penetration, shorter cycle times, and greater payloads.**

    

• Make moving the excavator much easier with optional Cat Stick Steer. Simply push a button and use one hand to travel and turn instead of both hands or feet on levers or pedals.

    

• Make operating easier with the touch of a joystick button. Additional auxiliary relays allow you to power on or turn off a CB radio, beacon light, and even a dust suppression watering system without taking your hands off the joysticks.

    

• Need more lift during your shift? Turn on Auto Heavy Lift and get up to 8% more power exactly when you need it for as long as you need it.**

    

• Tiltrotator attachments–ours or other brands–work seamlessly with Cat 2D Grade, Assist, Payload, and E-Fence . With no additional hardware required, all you have to do is simply select “Third Party Tiltrotator System Installation” in the monitor, do the calibration, and get to work.

*Automated attachment settings must be enabled within each machine configuration. Consult your Cat dealer for details.
**Auto Dig Boost and Auto Heavy Lift calculations are based on 380 bar (boost pressure) divided by 350 bar (standard pressure). Does not apply to long reach excavators.
 

    
• Extended maintenance intervals help reduce maintenance costs.

    

• Boost productivity with proactive service reminders. The Integrated vehicle health management system alerts the operator with step-by-step service guidance along with parts needed so you don’t experience any unnecessary downtime.

    

• Do all daily maintenance inspections at ground level.

    

• Check engine oil level quickly and safely with the ground-level engine oil dipstick; fill and check engine oil on top of the machine with a conveniently located second dipstick.

    

• Reversing electric cooling fans make it easy to clean radiator, oil coolers, and condensers.

    

• The latest air intake filter with pre-cleaner has a high dust-holding capacity.

    

• The latest hydraulic oil filter offers high-quality filtration performance, features anti-drain valves to keep the oil clean when the filter is replaced, and provides an extended 3,000-hour replacement interval for efficiency and convenience.

    

• Using Cat® genuine oil and filters and doing your typical S∙O∙S^SM monitoring will extend the current service interval to 1,000 hours, giving you greater uptime to do more work.

    

• S·O·S ports are on ground level, simplifying maintenance and allowing for quick, easy extraction of samples for fluid analysis.

    
• Optional Cat® Detect – People Detection helps protect the most valuable asset on any jobsite – people. The system uses smart cameras with depth sensors to provide the operator with visual and auditory alerts so he or she can take immediate action when a person is too close to the excavator.*

    

• Optional Cat Command remote control enables equipment operators to work safely outside the machine when working in hazardous environments. Command offers the choice of handheld Consoles** (line-of-sight) or long-distance virtual Stations (non-line-of-sight). Deep integration with machine systems enables efficiency and productivity by maintaining the use of in-cab technology** features (Grade, Payload, Assist, etc.).

    

• 2D E-Fence restricts the front linkage from moving beyond operator-defined preset boundaries for the ceiling, floor, wall, swing, and cab. It helps operators avoid jobsite hazards such as traffic, keeps personnel safe, and helps you save on costly repairs, equipment downtime, and potential jobsite fines.

    

• Access daily maintenance inspection points from ground level – no need for you to climb on top of excavator.

    

• The standard ROPS cab meets ISO 12117-2:2008 requirements.

    

• Enjoy great visibility into the trench, in each swing direction, and behind you with the help of smaller cab pillars, larger windows, and a flat engine hood design.

    

• The standard hydraulic lockout lever isolates all hydraulic and travel functions in the lowered position.

    

• Ground level shut-off switch stops all fuel to the engine when activated and shuts down the machine.

    

• Rear and right-hand-sideview cameras are standard. Upgrade to 360° visibility, allowing the operator to easily visualize objects and personnel around the excavator in a single view.

    

• Right-hand service platform design provides easy, safe, and quick access to upper service platform; the service platform steps use anti-skid punch plate to prevent slipping. The handrails comply with ISO 2867 requirements.

    

• Make service work easier with optional inspection lighting. With the flip of a switch, lights will illuminate the engine, pump, battery, and radiator compartments to enhance visibility.

    

• Enhance jobsite safety. Add a swing alarm to alert people when you’re rotating from trench to stockpile and back again.

*The system may not detect personnel in certain circumstances, such as fast swing speeds, people lying down or crouching, or when cameras are impaired by low light conditions (dusk, dawn, overcast), inclement weather (snow, rain, fog), or other similar conditions. For limitations of use, refer to the operation and maintenance manual.
**Operator assist features for the Command Console are not available in Europe, Australia, and New Zealand.

Tackle your jobs with a complete Cat® solution. Cat attachments are not just accessories – they are essential tools that define what your machine can do. When you pair a Cat excavator with Cat attachments, you unlock a fully integrated system built for performance, durability, and efficiency. Whether you are clearing land, breaking concrete, or compacting soil, the right attachment transforms your excavator into a powerful, multi-purpose tool ready for any challenge. Depending on your project or application, you could benefit from excavator attachments such as:

    
• Buckets: Handle everything from digging and grading to cleanup and debris removal with your excavator. Caterpillar® offers general duty, heavy duty, extreme duty, and severe duty buckets, as well as specialized designs for ditch cleaning, rock, and finishing work. Reinforced edges and wear-resistant materials ensure long-lasting performance in tough conditions.

    

• Couplers (HEX): Cat® couplers for excavators enable fast, secure attachment changes, without the need to leave the cab. From Pin Grabbers to hydraulic quick connect options, couplers help reduce downtime, boost jobsite efficiency and promote versatility by allowing multiple machines to share a common attachment inventory.

    

• Hammers: Break concrete, rock, and steel with up to 1,000 blows per minute. Built for high-production demolition, quarrying, and construction, they offer powerful impact energy and consistent performance. Their durability and low-maintenance design make them essential for demanding breaking applications.

    

• Multi-Processors: A versatile tool for demolition, equipped with interchangeable jaws to handle concrete, steel, and rebar. Multi-Processors combine cutting, crushing and pulverizing capabilities in one attachment. Their modular design maximizes efficiency across a range of job site demands.

    

• Demolition and Sorting Grapples: Tackle larger debris or precisely sort materials into piles. These grapples are engineered for accuracy in demolition and material sorting, handling concrete, rebar, wood, and mixed debris. High clamping force and agile movement make them ideal for primary and secondary demolition and recycling operations.

    

• Scrap and Demolition Shears: Rotating shears provide precision cutting for metal structures, pipes, rebar, and scrap, making them ideal for demolition and recycling. Their powerful jaws and fast cycle times ensure clean cuts and high productivity. Built for durability, they excel in heavy-duty steel processing.

    

• Pulverizers: Built to crush concrete and separate rebar during demolition and recycling. With high crushing force and fast cycle times, pulverizers efficiently reduce material for easier handling. Primary models feature 360° bidirectional rotation and tackle structure teardown, while secondary models have a fixed jaw design and process debris after demolition.

    

• Compactors (Vibratory Plate): Compact soil, sand, gravel and asphalt quickly and efficiently to create a stable foundation. Vibratory plate compactors deliver high-impact force and even coverage, reducing air pockets and improving surface integrity for trenching, roadwork, and patching.

    

• Rotary Cutters: Get accurate, precise work with less noise and vibration. Cat® Rotary Cutters deliver high torque and precision for a range of applications: demolition, grinding, profiling, trenching, tunneling, and quarrying. Specifically designed for excavator-mounted use to handle heavy-duty materials like concrete, rock, and dense brush with ease.

    

• Orange Peel Grapples: Built for scrap and bulk material handling, Orange Peel Grapples excel with irregular, heavy loads like metal, rock, and waste. Their hydraulic tines provide superior grip and penetration. High-capacity and continuous rotation are perfect for scrap yards and transfer stations. Caterpillar® offers these grapples with a choice of different shell designs and tine options suited to various applications.

    

• Thumbs: Add gripping capability to your buckets, enabling precise and secure handling of irregular materials like rocks, stumps, and debris. Perfect for loading, sorting, and placing tasks, they enhance versatility and control. Hydraulic or mechanical options allow for flexible operation across job types.

    

• Tiltrotators: Tiltrotators provide 360° rotation and 40° left/right tilt functionality, allowing attachments to move with unmatched precision and flexibility. This flexibility transforms your machine into a multi-functional tool capable of working from virtually any angle without repositioning. Ideal for grading, trenching, and complex excavation work, they deliver multi-angle control for tight and confined spaces.

Cat® attachments are engineered to maximize your excavator’s productivity, helping you get more work done with greater efficiency and confidence. Choosing the right attachment is not just about compatibility, it is about unlocking your machine’s full potential while avoiding equipment damage or safety risks. Connect with your Cat Dealer to find the optimal attachments for your specific machine and application needs.

Please note: Not all attachments are available in all regions. Contact your Cat Dealer for details.

    
• The Cat® C4.4 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.

    

• The 320 emits lower CO2 emissions compared to the previous 320F.

    

• Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)*** or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. 

    

• VisionLink™ displays the CO2 emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.

    

• Cat Grade technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy.

    

• Auto Engine Speed Control reduces unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.

    

• Cat® Payload for excavators provides on-the-go material weighing which helps reduce fuel burn by improving loading efficiency, job site productivity, and eliminating trips to the scale.

    

• Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.

    

• Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.

    

• A well-trained operator is worth the investment. Skilled operators benefit your bottom line by maximizing productivity, avoiding costly downtime, and maintaining jobsite safety – which can help to improve fuel efficiency and reduce greenhouse gas emissions.
       

*While Caterpillar engines are compatible with these alternative fuels, some regions may not allow their use. 
**Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. 
***Engines with no aftertreatment devices are compatible with higher blends, up to 100% biodiesel (for use of  blends higher than 20% biodiesel, consult your Cat dealer).

NOTE

1. Standard and optional equipment may vary. Consult your Cat® dealer for details.

CAB

1. Rollover Protective Structure (ROPS)
2. Air-adjustable seat with heat (Deluxe only)
3. Auto-adjustable seat with heat and air ventilation (Premium only)
4. High-resolution 254 mm (10 inch) LCD touchscreen monitor

CAT TECHNOLOGY

1. VisionLink™
2. Remote Flash
3. Remote Troubleshoot
4. Work tool recognition and tracking (PL161)
5. Cat Grade with 2D
6. Cat Assist
7. Cat Payload

ELECTRICAL SYSTEM

1. Two 1,000 CCA maintenance-free batteries
2. Programmable time-delay LED working lights
3. LED chassis light, left-hand/right-hand boom lights, cab lights

ENGINE

1. Cat C4.4 twin turbo diesel engine
2. Three selectable power modes
3. Automatic engine speed control
4. 52°C (126°F) ambient cooling capacity
5. -32°C (-25°F) cold start capability
6. Double element air filter with integrated precleaner
7. Reversing electric cooling fans

HYDRAULIC SYSTEM

1. Boom and stick regeneration circuits
2. Auto warm up
3. Auto two-speed travel
4. Auto dig boost
5. Auto heavy lift
6. Boom and stick drift reduction valve

SAFETY AND SECURITY

1. 2D E-Fence
2. Auto hammer stop
3. Rearview and right-side-view cameras
4. Ground-level engine shutoff switch
5. Lockable disconnect switch
6. Right-hand handrail and hand hold
7. Signaling/warning horn

SERVICE AND MAINTENANCE

1. Scheduled Oil Sampling (S·O·S℠) ports
2. Ground-level and platform-level engine oil dipsticks
3. Integrated vehicle health management system

UNDERCARRIAGE AND STRUCTURES

1. Tie-down points on base frame

NOTE

1. Standard and optional equipment may vary. Consult your Cat® dealer for details.

BOOMS AND STICKS

1. 5.7 m (18’8″) Reach boom
2. 5.7 m (18’8″) HD Reach boom
3. 2.8 m (9’2″) Stub + 3.3 m (10’10”) Fore, VA boom
4. 8.85 m (29′) Super Long Reach boom
5. 2.5 m (8’2″) Reach stick
6. 2.9 m (9’6″) Reach stick
7. 2.5 m (8’2″) HD Reach stick
8. 2.9 m (9’6″) HD Reach stick
9. 2.9 m (9’6″) HD Thumb Ready Reach stick
10. 6.28 m (20’7″) Super Long Reach stick

CAB

1. Operator Protective Guards (OPG)
2. Cat Stick Steer
3. Auxiliary relay

CAT TECHNOLOGY

1. Operator Coaching
2. Cat Grade with 2D with Attachment Ready Option (ARO)
3. Cat Grade with 3D (single or dual GNSS)
4. Cat Grade 3D Ready
5. Cat Grade Connectivity
6. Cat Advanced Payload
7. Cat Tiltrotator (TRS) integration

HYDRAULIC SYSTEM

1. Boom and stick lowering check valves
2. SmartBoom™ (Europe only)
3. Hammer return filter circuit
4. Hydraulic efficiency monitoring
5. Advanced tool control (two pump, one/two way high-pressure flow)
6. Medium-pressure circuit
7. Quick coupler circuit for Cat pin grabber

SAFETY AND SECURITY

1. Cat Command (remote control)
2. 360° visibility
3. Swing alarm
4. Inspection lighting

UNDERCARRIAGE AND STRUCTURES

1. 600 mm (24″) triple grouser shoes
2. 700 mm (28″) triple grouser shoes
3. 790 mm (31″) triple grouser shoes
4. 900 mm (35″) triple grouser shoes
5. 4200 kg (9,300 lb) counterweight
6. 4700 kg (10,400 lb) counterweight