With our huge inventory of new, used and rental equipment, WesTrac has the right machine for the job.
With our huge inventory of new, used and rental equipment, WesTrac has the right machine for the job.
Keep your operation working around the clock by making WesTrac your partner in parts. With over 75,000 product lines stocked in our warehouses, ready-to-go, we won't let you down.
Cat® Tiltrotators help you maneuver obstacles in your work area without the need for repositioning your machine.
Cat® Tiltrotators for excavators provide 360-degree rotation and 40-degree tilting action side-to-side, allowing the machine to reach more work areas from a single position. The tiltrotator enables the operator to maneuver around posts, rocks, and other obstacles, as well as to reach along ditch edges more easily.
Machine Class | 6 Ton Mini Excavators | 6 Ton Mini Excavators |
Weight | 210 kg | 463 lb |
Interface Options: Top-Bottom | Pin-On / Pin Grabber | Pin-On / Pin Grabber |
Overall Height | 905 mm | 35.6 in |
Length | 526 mm | 20.7 in |
Overall Width | 490 mm | 19.3 in |
Rotation Speed | 7 Seconds per 1 Full Rotation | 7 Seconds per 1 Full Rotation |
Tilt Angle Range +/- | 40 degrees left/right | 40 degrees left/right |
Maximum Bucket Capacity | 250 l | 8.8 ft³ |
Maximum Bucket Width | 1200 mm | 47.2 in |
Optimal Hydraulic Flow | 45-80 L/min (12-21 gpm) | 45-80 L/min (12-21 gpm) |
Maximum Operating Pressure | 25000 kPa | 3625.9 psi |
Required Hydraulics | 1st Auxiliary | 1st Auxiliary |
Tilting Torque | 14408.3 N·m | 10627 lb/ft |
Turning Torque | 3900 N·m | 2876.5 lb/ft |
Provides optimal control of your work tools to provide greater flexibility.
A single point of entry for grease allows the entire unit to be greased quickly and easily.
Upgraded software informs the operator of the attachments position via standard equipped monitoring sensors.
A maintenance free solution that more effectively distributes heat, providing better lubrication than grease.
Worm gear box with high rotation torque and self locking ability allows digging in all directions with full power, allowing the gear to accept the maximum machine forces and split the load through the entire TRS construction.
Valves sustain holding pressures and prevent cylinder movement under load constraints.
The visual verification indicator allows the operator to visibly confirm, from the cab, that the coupler has successfully locked the attachment into place properly.
LCS incorporates an electronic position sensor integrated into the quick coupler hydraulic cylinder. This sensor provides precise and reliable input to an electronic processor mounted inside the quick coupler. This microprocessor provides digital communication to the Next Generation MHE machine Electronic Control Module (ECM) by way of an electrical harness. This data is then displayed on the operators display screen, and will provide audible indications when that locking status changes.
Only compatible with the following Next Gen machines and serial numbers:
Cat® Tiltrotators for excavators provide 360-degree rotation and 40-degree tilting action side-to-side, allowing the machine to reach more work areas from a single position. The tiltrotator enables the operator to maneuver around posts, rocks, and other obstacles, as well as to reach along ditch edges more easily.
Machine Class | 6 Ton Mini Excavators | 6 Ton Mini Excavators |
Weight | 210 kg | 463 lb |
Interface Options: Top-Bottom | Pin-On / Pin Grabber | Pin-On / Pin Grabber |
Overall Height | 905 mm | 35.6 in |
Length | 526 mm | 20.7 in |
Overall Width | 490 mm | 19.3 in |
Rotation Speed | 7 Seconds per 1 Full Rotation | 7 Seconds per 1 Full Rotation |
Tilt Angle Range +/- | 40 degrees left/right | 40 degrees left/right |
Maximum Bucket Capacity | 250 l | 8.8 ft³ |
Maximum Bucket Width | 1200 mm | 47.2 in |
Optimal Hydraulic Flow | 45-80 L/min (12-21 gpm) | 45-80 L/min (12-21 gpm) |
Maximum Operating Pressure | 25000 kPa | 3625.9 psi |
Required Hydraulics | 1st Auxiliary | 1st Auxiliary |
Tilting Torque | 14408.3 N·m | 10627 lb/ft |
Turning Torque | 3900 N·m | 2876.5 lb/ft |
Provides optimal control of your work tools to provide greater flexibility.
A single point of entry for grease allows the entire unit to be greased quickly and easily.
Upgraded software informs the operator of the attachments position via standard equipped monitoring sensors.
A maintenance free solution that more effectively distributes heat, providing better lubrication than grease.
Worm gear box with high rotation torque and self locking ability allows digging in all directions with full power, allowing the gear to accept the maximum machine forces and split the load through the entire TRS construction.
Valves sustain holding pressures and prevent cylinder movement under load constraints.
The visual verification indicator allows the operator to visibly confirm, from the cab, that the coupler has successfully locked the attachment into place properly.
LCS incorporates an electronic position sensor integrated into the quick coupler hydraulic cylinder. This sensor provides precise and reliable input to an electronic processor mounted inside the quick coupler. This microprocessor provides digital communication to the Next Generation MHE machine Electronic Control Module (ECM) by way of an electrical harness. This data is then displayed on the operators display screen, and will provide audible indications when that locking status changes.
Only compatible with the following Next Gen machines and serial numbers: