With our huge inventory of new, used and rental equipment, WesTrac has the right machine for the job.
Motor Graders
Compare Models
UNITS:
Metric
Imperial
Engine
Base Power (1st Gear) - Net
227 kW
304 HP
-
-
Engine Model
Cat® C13
Cat® C13
Cat C27
Cat C27
Cat 7.1
Cat 7.1
Bore
130 mm
5.1 in
137.2 mm
5.4 in
105 mm
4.1 in
Stroke
157 mm
6.2 in
152.4 mm
6 in
135 mm
5.3 in
Speed at Rated Power
2,000 rpm
2,000 rpm
-
-
Standard - Ambient Capability
50 °C
122 °F
-
-
Base Power (1st Gear) - Net - Metric
227 kW
309 HP
-
-
VHP Range - Net
227-266 kW (304-357 hp)
227-266 kW (304-357 hp)
-
-
Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent
1721 N·m
1270 lb/ft
-
-
Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent
3711 m
12176 ft
-
-
Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent
3954 m
12973 ft
-
-
Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent
1721 N·m
1270 lb/ft
-
-
Standard - Fan Speed - Minimum
550 rpm
550 rpm
-
-
Emissions (1)
U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)
U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)
-
-
Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4 Final)
40%
40%
-
-
Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4 Final)
1771 N·m
1306 lb/ft
-
-
Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4 Final)
3810 m
12500 ft
-
-
Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent
38%
38%
-
-
Standard - Fan Speed - Maximum
1,450 rpm
1,450 rpm
-
-
Emissions (2)
Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards
Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards
-
-
Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent
38%
38%
-
-
VHP Range - Net - Metric
227-266 kW (309-362 hp)
227-266 kW (309-362 hp)
-
-
Emissions (3)
Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards
Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards
-
-
Displacement
12.5 l
763 in³
27.03 l
1648 in³
7.01 l
427.8 in³
Number of Cylinders
6
6
12
12
6
6
Optimized VHP Range - Net
227-266 kW (304-357 hp)
227-266 kW (304-357 hp)
-
-
Net Power - EEC 80/1269
-
399 kW
535 HP
-
Note (1)
-
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269
Standards in effect at the time of manufacture.
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269
Standards in effect at the time of manufacture.
Note (3)
-
Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Power as declared per ISO 14396
Power as declared per ISO 14396
Note (2)
-
Optimized VHP Plus is standard for the 24.
Optimized VHP Plus is standard for the 24.
Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Standard Capability
-
50 °C
122 °F
50 °C
122 °F
Emissions
-
Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
China Nonroad Stage III and Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3/EU Stage IIIA
China Nonroad Stage III and Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3/EU Stage IIIA
Note (4)
-
Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)
Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)
-
Net Power Range (Tier 3)
-
-
97 kW
130 HP
Derating Altitude (AWD)
-
-
1676 m
5499 ft
Maximum Torque - ISO 9249
-
-
822 N·m
606 lb/ft
Derating Altitude
-
-
3000 m
9842.5 ft
Maximum Torque - AWD On
-
-
828 N·m
611 lb/ft
All-Wheel Drive Net Power Range (Tier 3)
-
-
101 kW
136 HP
Torque Rise - ISO 9294
-
-
42%
42%
Engine RPM
-
-
2,000
2,000
Weights
Operating Weight - Typically Equipped
33713 kg
74324 lb
74985 kg
165314 lb
15803 kg
34839 lb
Power Train
Forward/Reverse Gears
8 Forward/6 Reverse
8 Forward/6 Reverse
Transmission
Direct drive, power shift, countershaft
Direct drive, power shift, countershaft
Brakes - Parking
Spring applied, hydraulically released
Spring applied, hydraulically released
Brakes - Dynamic Brake Torque per Wheel
36701 N·m
27069.27 lb/ft
Brakes - Service
Oil-actuated, oil disc
Oil-actuated, oil disc
Brakes - Secondary
Oil-actuated, oil-disc
Oil-actuated, oil-disc
Moldboard
Blade Width
5.5 m
18 ft
7.3 m
24 ft
3.7 m
12 ft
Arc Radius
413 mm
16.3 in
-
413 mm
16.3 in
Throat Clearance
126 mm
5 in
-
120 mm
4.7 in
Down Force - Maximum GVW
19895 kg
43861 lb
-
-
Blade Pull* - Base GVW
21417 kg
47216 lb
-
-
Blade Pull* - Maximum GVW
23985 kg
52878 lb
-
-
End Bit - Width
152 mm
6 in
-
-
Down Force - Base GVW
15426 kg
34008 lb
-
-
Cutting Edge Thickness
35 mm
1.4 in
-
-
Thickness
25 mm
1 in
-
-
Width
5.5 m
18 ft
-
-
Cutting Edge Width
254 mm
10 in
-
152 mm
6 in
End Bit - Thickness
19 mm
0.75 in
-
-
Height
787 mm
31 in
-
-
Note
*Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.
*Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.
-
-
Blade Height
-
1025 mm
40 in
610 mm
24 in
Cutting Edge
-
-
152 mm
6 in
End Bit
-
-
152 mm
6 in
Hydraulic System
Circuit Type
Electro-hydraulic load sensing, closed center
Electro-hydraulic load sensing, closed center
Pump Type
Variable piston
Variable piston
Maximum System Pressure
24750 kPa
3590 psi
Standby Pressure
5900 kPa
856 psi
Pump Output*
280 l/min
74 gal/min
Note
*Pump output measured at 2,150 rpm.
*Pump output measured at 2,150 rpm.
Operating Specifications
Forward - 6th
25.8 km/h
16 mile/h
Forward - 2nd
6.1 km/h
3.8 mile/h
Forward - 8th
51.7 km/h
32.1 mile/h
Forward - 5th
19 km/h
11.8 mile/h
Reverse - 3rd
9.7 km/h
6 mile/h
Turning Radius - Outside Front Tires
9.3 m
30.5 ft
Forward - 4th
12.3 km/h
7.6 mile/h
Top Speed - Reverse
40.8 km/h
25.3 mile/h
Forward - 7th
35.5 km/h
22 mile/h
Articulation Angle - Left/Right
20°
20°
Reverse - 1st
3.6 km/h
2.2 mile/h
Forward - 3rd
8.9 km/h
5.5 mile/h
Reverse - 4th
15 km/h
9.3 mile/h
Forward - 1st
4.5 km/h
2.8 mile/h
Top Speed - Forward
51.7 km/h
32.1 mile/h
Reverse - 6th
40.8 km/h
25.3 mile/h
Steering Range - Left/Right
47.5°
47.5°
Reverse - 2nd
6.6 km/h
4.1 mile/h
Reverse - 5th
28 km/h
17.4 mile/h
Note
Calculated with no slip and 23.5R25 L-3 tires.
Calculated with no slip and 23.5R25 L-3 tires.
Service Refill
Fuel Capacity
496 l
131 gal (US)
Cooling System
70 l
18.5 gal (US)
Hydraulic System - Tank
70 l
18.5 gal (US)
Hydraulic System - Total
146 l
38.6 gal (US)
DEF Tank
16 l
4.2 gal (US)
Engine Oil
36 l
9.5 gal (US)
Transmission - Differential - Final Drives
98.5 l
26 gal (US)
Tandem Housing - Each
129 l
34 gal (US)
Front Wheel Spindle Bearing Housing
0.9 l
0.24 gal (US)
Circle Drive Housing
10 l
2.6 gal (US)
Frame
Front Frame Structure - Width
356 mm
14 in
Front Axle - Height to Center
670 mm
26.4 in
Circle - Diameter
1822 mm
71.7 in
Front Frame Structure - Thickness
14 mm
0.6 in
Front Frame Structure - Height
460 mm
18.1 in
Circle - Blade Beam Thickness
50 mm
2 in
Drawbar - Width
76 mm
3 in
Front Axle - Wheel Lean
18° Left/17° Right
18° Left/17° Right
Front Axle - Total Oscillation per Side
35°
35°
Drawbar - Height
203 mm
8 in
Tandems
Sidewall Thickness - Outer
22 mm
0.9 in
Sidewall Thickness - Inner
22 mm
0.9 in
Tandem Oscillation - Front Up
15°
15°
Tandem Oscillation - Front Down
25°
25°
Height
648 mm
25.5 in
Width
236 mm
9.3 in
Drive Chain Pitch
63.5 mm
2.5 in
Wheel Axle Spacing
1841 mm
72.5 in
Blade Range
Maximum Blade Position Angle
65°
65°
-
-
Maximum Lift Above Ground
400 mm
15.7 in
410 mm
16.1 in
410 mm
16.1 in
Maximum Depth of Cut
470 mm
18.5 in
550 mm
21.7 in
775 mm
30.5 in
Maximum Shoulder Reach Outside of Tires - Right
2605 mm
103 in
-
-
Circle Centershift - Right
560 mm
22 in
-
-
Maximum Shoulder Reach Outside of Tires - Left
2605 mm
103 in
-
-
Moldboard Sideshift - Right
790 mm
31.1 in
-
-
Blade Tip Range - Backward
5°
5°
-
-
Moldboard Sideshift - Left
740 mm
29.1 in
-
-
Circle Centershift - Left
690 mm
27.2 in
-
-
Blade Tip Range - Forward
40°
40°
-
-
Maximum Shoulder Reach Right
-
-
1928 mm
76 in
Circle Center Shift Right
-
-
656 mm
26 in
Blade Tip Range Forward
-
-
40
40
Moldboard Side Shift Right
-
-
663 mm
26.1 in
Blade Tip Range Backward
-
-
5
5
Maximum Shoulder Reach Left
-
-
1764 mm
69.4 in
Moldboard Side Shift Left
-
-
512 mm
20.1 in
Circle Center Shift Left
-
-
656 mm
26 in
Ripper
Shank Holder Spacing - Minimum
445 mm
17.5 in
Ripping Depth - Maximum
452 mm
17.8 in
Ripper Shank Holders
7
7
Penetration Force
13749 kg
30311 lb
Pry-Out Force
19822 kg
43700 lb
Machine Length Increase, Beam Raised
1610 mm
63.4 in
Shank Holder Spacing - Maximum
500 mm
20 in
Weights Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)*
Gross Vehicle Weight - Typically Equipped - Rear Axle
24417 kg
53830 lb
Gross Vehicle Weight - Base** - Total
32794 kg
72298 lb
Gross Vehicle Weight - Maximum Tested - Rear Axle
26650 kg
58753 lb
Gross Vehicle Weight - Maximum Tested - Front Axle
11850 kg
26125 lb
Gross Vehicle Weight - Typically Equipped - Front Axle
9296 kg
20494 lb
Gross Vehicle Weight - Base** - Front Axle
8998 kg
19837 lb
Gross Vehicle Weight - Maximum Tested - Total
38500 kg
84877 lb
Gross Vehicle Weight - Typically Equipped - Total
33713 kg
74324 lb
Gross Vehicle Weight - Base** - Rear Axle
23796 kg
52461 lb
Note (2)
**Base operating weight calculated on standard machine configuration with 23.5R25 tires, full fuel tank operator and rops cab.
**Base operating weight calculated on standard machine configuration with 23.5R25 tires, full fuel tank operator and rops cab.
Note (1)
*No Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission engine: subtract 150 kg (331 lb) from rear axle wt. & total wt.
*No Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission engine: subtract 150 kg (331 lb) from rear axle wt. & total wt.
Dimensions (Approximate)
Height - Top of Cylinders
3115 mm
122.6 in
Width - Outside Rear Tires
3411 mm
134.3 in
Height - Exhaust Stack
3584 mm
141.1 in
Length - Between Tandem Axles
1841 mm
72.5 in
Length - Front Axle to Mid Tandem
7365 mm
290 in
Width - Tire Center Lines
2703 mm
106.4 in
Length - Front Axle to Moldboard
3066 mm
120.7 in
Length - Counterweight to Ripper
12051 mm
474.4 in
Height - Front Axle Center
760 mm
29.9 in
Width - Outside Front Tires
3411 mm
134.3 in
Length - Front Tire to Rear of Machine - Including Tow Hitch
10593 mm
417 in
Height - Top of Cab
3746 mm
147.5 in
Ground Clearance - Rear Axle
423 mm
16.7 in
Standards
Sound
ISO 6394: 2008/ISO 6395: 2008/ISO 6396: 2008
ISO 6394: 2008/ISO 6395: 2008/ISO 6396: 2008
ROPS/FOPS
ISO 3471: 2008/ISO 3449: 2005
ISO 3471: 2008/ISO 3449: 2005
Brakes
ISO 3450: 2011
ISO 3450: 2011
Steering
ISO 5010: 2007
ISO 5010: 2007
Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Metric
Gear - Forward 1st
227 kW
309 HP
Gear - Forward 2nd
227 kW
309 HP
Gear - Reverse 2nd
227 kW
309 HP
Gear - Forward 4th
239 kW
325 HP
Gear - Forward 6th
251 kW
341 HP
Gear - Forward 5th
244 kW
332 HP
Gear - Forward 8th
266 kW
362 HP
Gear - Reverse 1st
227 kW
309 HP
Gear - Forward 3rd
232 kW
315 HP
Gear - Forward 7th
255 kW
347 HP
Gear - Reverse 3rd-6th
232 kW
315 HP
Optional Tire Arrangements
Wheel Group - 19.5×25 MP (2)
Tires: 23.5R25 Bridgestone VKT 1 Star
Tires: 23.5R25 Bridgestone VKT 1 Star
Wheel Group - 19.5×25 MP (1)
Tires: 23.5R25 Bridgestone VKT 2 Star
Tires: 23.5R25 Bridgestone VKT 2 Star
Wheel Group - 19.5×25 MP (3)
Tires: 23.5R25 Bridgestone VJT 1 Star
Tires: 23.5R25 Bridgestone VJT 1 Star
Wheel Group - 19.5×25 MP (4)
Tires: 23.5R25 Michelin XHA 2 Star
Tires: 23.5R25 Michelin XHA 2 Star
Wheel Group - 19.5×25 MP (5)
Tires: 23.5R25 Michelin XLDD 2 Star L5
Tires: 23.5R25 Michelin XLDD 2 Star L5
Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Net
Gear - Forward 4th
239 kW
321 HP
Gear - Reverse 2nd
227 kW
304 HP
Gear - Forward 1st
227 kW
304 HP
Gear - Reverse 3rd-6th
232 kW
311 HP
Gear - Forward 3rd
232 kW
311 HP
Gear - Forward 5th
244 kW
327 HP
Gear - Forward 7th
255 kW
342 HP
Gear - Forward 2nd
227 kW
304 HP
Gear - Reverse 1st
227 kW
304 HP
Gear - Forward 6th
251 kW
337 HP
Gear - Forward 8th
266 kW
357 HP
Machine Weight
Weight*
73344 kg
161695 lb
-
Joystick Weight* Tier 3
-
15824 kg
34886 lb
Joystick All-Wheel Drive (AWD) Weight* Tier 3
-
16499 kg
36374 lb
Lever/Steering Wheel Weight* Tier 3
-
15699 kg
34610 lb
Note
-
*Typically equipped includes 3.7 m (12 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids.
*Typically equipped includes 3.7 m (12 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids.
Dimensions
Length of Machine*
9838 mm
387 in
Width
2592 mm
102 in
Width All Wheel Drive (AWD)
100.4 in
2551 mm
Maximum Height
3465 mm
136.4 in
Note
*Typically equipped with push block and ripper.
*Typically equipped with push block and ripper.
Service Refill Capacities
Circle Drive
7 l
1.8 gal (US)
Engine Crankcase
18 l
4.8 gal (US)
Transmission and Differential
60 l
15.9 gal (US)
Hydraulic System
97 l
25.6 gal (US)
Fuel Tank
246 l
65 gal (US)
Cooling System
52.5 l
14 gal (US)