Drills

Compare Models

MD6310
MD6310
  • MD6200
  • MD6250
  • MD6380
MD6380
  • MD6200
  • MD6250
  • MD6310
MD6200
  • MD6250
  • MD6310
  • MD6380
UNITS:
Metric
Imperial
Pull-Down Capacity
Up to 39 009 kg (86,000 lb)
Up to 39 009 kg (86,000 lb)
 
Up to 39 009 kg (86,000 lb)
Up to 39 009 kg (86,000 lb)
 
Up to 15 876 kg (Up to 35,000 lb)
Up to 15 876 kg (Up to 35,000 lb)
Hole Diameter
203-311 mm (8-12.25 in)
203-311 mm (8-12.25 in)
 
251-381 mm (9.875-15 in)
251-381 mm (9.875-15 in)
 
140-200 mm (5.5-7.87 in)
140-200 mm (5.5-7.87 in)
Engine
Cat® C32B
Cat® C32B
 
Cat® 3512C
Cat® 3512C
 
Cat© C18
Cat© C18
Bit Load
Up to 42 149 kg (Up to 92,922 lb)
Up to 42 149 kg (Up to 92,922 lb)
 
Up to 53 845 kg (118,719 lb)
Up to 53 845 kg (118,719 lb)
 
Up to 16 964 kg (37,400 lb)
Up to 16 964 kg (37,400 lb)
Body Length - Standard Cab
13.27 m
43.54 ft
Length - Mast Down - Extended Cab
25.43 m
83.33 ft
Length - Mast Down - Standard Cab
24.9 m
81.69 ft
Width - Front
5.39 m
17.68 ft
Body Length - Extended Cab
13.79 m
42.24 ft
Height - Mast Up
23.77 m
77.99 ft
Width - Rear
6.32 m
20.73 ft
13.7 m (44.9 ft) Mast - Hoist Speed
37.4 m/min
122.7 ft/min
 
-
17.5 m (57.4 ft) Mast - Hoist Speed
37.4 m/min
122.7 ft/min
 
-
Emissions (Equivalent to Tier 2): Engine
C32B @ 1,800 rpm
C32B @ 1,800 rpm
 
-
13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth
Down to 74.6 m (Down to 244.9 ft)
Down to 74.6 m (Down to 244.9 ft)
 
-
17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth
Down to 47.9 m (Down to 157.4 ft)
Down to 47.9 m (Down to 157.4 ft)
 
-
17.5 m (57.4 ft) Mast - Pulldown Capacity
Up to 39 009 kg (Up to 86,000 lb)
Up to 39 009 kg (Up to 86,000 lb)
 
-
17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth
17.5 m
57.4 ft
 
-
13.7 m (44.9 ft) Mast - Hole Diameter Range
203-311 mm (8-12.25 in)
203-311 mm (8-12.25 in)
 
-
Angle Drilling
Vertical to 30° (in 5° increments)
Vertical to 30° (in 5° increments)
 
-
17.5 m (57.4 ft) Mast - Hole Diameter Range
203-311 mm (8-12.25 in)
203-311 mm (8-12.25 in)
 
-
17.5 m (57.4 ft) Mast - Bit Load - Single Pass
Up to 42 149 kg (Up to 92,922 lb)
Up to 42 149 kg (Up to 92,922 lb)
 
-
13.7 m (44.9 ft) Mast - Hoist Capacity
Up to 22 113 kg (Up to 48,750 lb)
Up to 22 113 kg (Up to 48,750 lb)
 
-
Compressor - Rotary Drilling (1)
56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)
56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)
 
-
Compressor - Rotary Drilling (2)
73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi)
73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi)
 
-
13.7 m (44.9 ft) Mast - Pulldown Capacity
Up to 39 009 kg (Up to 86,000 lb)
Up to 39 009 kg (Up to 86,000 lb)
 
-
13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth
13.7 m
44.9 ft
 
-
Emissions (U.S. EPA Tier 4 Final): Engine
C32B @ 1,800 rpm
C32B @ 1,800 rpm
 
-
Compressor - DTH Drilling
42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi)
42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi)
 
29.7 m_/min (1,050 ft_/min) @ 24.1 bar (350 psi)
29.7 m_/min (1,050 ft_/min) @ 24.1 bar (350 psi)
17.5 m (57.4 ft) Mast - Hoist Capacity
Up to 22 113 kg (Up to 48,750 lb)
Up to 22 113 kg (Up to 48,750 lb)
 
-
13.7 m (44.9 ft) Mast - Bit Load - Single Pass
Up to 41 165 kg (Up to 90,753 lb)
Up to 41 165 kg (Up to 90,753 lb)
 
-
Emissions (U.S. EPA Tier 4 Final): Power Rating ISO 14396
751 kW
1007 HP
 
-
Emissions (Equivalent to Tier 2): Power Rating ISO 14396
769 kW
1031 HP
 
-
U.S. EPA Tier 2 Equivalent - Engine
-
 
C18 @ 1,800 rpm
C18 @ 1,800 rpm
U.S. EPA Tier 2 Equivalent - Emissions
-
 
U.S. EPA Tier 2 equivalent
U.S. EPA Tier 2 equivalent
U.S. EPA Tier 4 Final - Engine
-
 
C18 @ 1,800 rpm
C18 @ 1,800 rpm
U.S. EPA Tier 4 Final - Emissions
-
 
U.S. EPA Tier 4 Final
U.S. EPA Tier 4 Final
Compressor - Rotary Drilling
-
 
32.6 cmm (1,150 cfm) @ 8.6 bar (125 psi)
32.6 cmm (1,150 cfm) @ 8.6 bar (125 psi)
Angle Drilling Available
-
 
30 degrees to 0 degrees in 5-degree increments
30 degrees to 0 degrees in 5-degree increments
Bit Load (single-Pass)
-
 
16964 kg
37400 lb
Hoist Speed
-
 
1.32 m/s
4.3 ft/s
Hole Diameter Range
-
 
140-200 mm (5.5-7.87 in)
140-200 mm (5.5-7.87 in)
Hole Depth Range - Single-Pass Depth
-
 
11 m
36 ft
Pull-DownCapacity
-
 
Up to 15 876 kg (Up to 35,000 lb)
Up to 15 876 kg (Up to 35,000 lb)
Hoist Capacity
-
 
Up to 11 907 kg (Up to 26,250 lb)
Up to 11 907 kg (Up to 26,250 lb)
Hole Depth Range - Multi-Pass Depth
-
 
Down to 47.58 m (Down to 156 ft)
Down to 47.58 m (Down to 156 ft)
U.S. EPA Tier 4 Final - Power Rating (ISO 14396)
-
 
439 kW
589 HP
U.S. EPA Tier 2 Equivalent - Power Rating (ISO 14396)
-
 
438 kW
587 HP
Drawbar Pull
547000 N
122971 lbf
 
-
 
262 000 Nm (193,241 lbf-ft)
262 000 Nm (193,241 lbf-ft)
Track chain guards and guides
Level two
Level two
 
-
 
-
Travel Speed
2.45 km/h
1.5 mile/h
 
-
 
-
Lower rollers
Fourteen (14)
Fourteen (14)
 
-
 
Eight (8)
Eight (8)
Model
Cat® 349E EL Excavator type
Cat® 349E EL Excavator type
 
-
 
Cat® 336 Excavator type
Cat® 336 Excavator type
Carrier Rollers
Three (3)
Three (3)
 
-
 
Three (3)
Three (3)
Triple grousers for soft rock ground bearing pressure 1.28 bar (18.5 psi)
750 mm
29.5 in
 
-
 
-
Cat 374 EEL - Double Grousers for Hard Rock Applications
-
 
750 mm
29.5 in
 
-
Cat 374 EEL - Drawbar Pull
-
 
980686 N·m
723316 lbf
 
-
Cat 374 EEL - Double Grousers for Soft Rock Applications
-
 
900 mm
35.4 in
 
-
Triple Grousers (1)
-
 
-
 
600 mm (23.6 in); 0.89 bar (12.6 psi) ground pressure
600 mm (23.6 in); 0.89 bar (12.6 psi) ground pressure
Components (1)
-
 
-
 
Track chain guards and guides
Track chain guards and guides
Travel Speed - High
-
 
-
 
3.3 km/h
2 mile/h
Travel Speed - Low
-
 
-
 
2.1 km/h
1.3 mile/h
Components (10)
In-deck mounted battery box
In-deck mounted battery box
 
Machine lifting provisions
Machine lifting provisions
Components (9)
Self-closing, gates secure egress ladder locations
Self-closing, gates secure egress ladder locations
 
Slip resistant platform surfaces
Slip resistant platform surfaces
Components (12)
Air hose retention devices
Air hose retention devices
 
-
Components (2)
Seven (7) engine shut down buttons: in cab, at drill deck, on deck at power train, ground accessible by main access point and each side of the drill front and left
Seven (7) engine shut down buttons: in cab, at drill deck, on deck at power train, ground accessible by main access point and each side of the drill front and left
 
Hinged window guard over the full length of the front drill window
Hinged window guard over the full length of the front drill window
Components (6)
Guards for exhaust pipes and turbo lines
Guards for exhaust pipes and turbo lines
 
Automatic, audible tram alarm
Automatic, audible tram alarm
Feature
Approach angle of 14 degrees facilitates loading and unloading on a lowboy
Approach angle of 14 degrees facilitates loading and unloading on a lowboy
 
-
Components (7)
Mast access ladder with mast grating (option)
Mast access ladder with mast grating (option)
 
Battery disconnect and starter switches can be locked out
Battery disconnect and starter switches can be locked out
Components (4)
Tram alarm is automatic and audible
Tram alarm is automatic and audible
 
Self-closing gates
Self-closing gates
Components (11)
Ground level keyed battery disconnect/starter lockout with remote jump start terminals
Ground level keyed battery disconnect/starter lockout with remote jump start terminals
 
FOPS Certified Operator Cab
FOPS Certified Operator Cab
Components (1)
Alloy drill deck covers, with storage provision
Alloy drill deck covers, with storage provision
 
Seven (7) emergency stop buttons
Seven (7) emergency stop buttons
Components (5)
Hinged protective guard for full front drill window
Hinged protective guard for full front drill window
 
Electric horn activated by push button in the cab
Electric horn activated by push button in the cab
Components (3)
Electric horn activated by push button in the cab
Electric horn activated by push button in the cab
 
Conditional safety interlocks
Conditional safety interlocks
Components (8)
Three egress points on deck areas in addition to main access
Three egress points on deck areas in addition to main access
 
Air hose retention devices
Air hose retention devices
Feature (1)
-
 
Approach angle of 15-degrees facilitates loading and unloading on a lowboy
Approach angle of 15-degrees facilitates loading and unloading on a lowboy
Components (10)
Filter indicators for hydraulic, compressor and engine
Filter indicators for hydraulic, compressor and engine
 
Data logging of machine health with warnings and fault code records with export capability
Data logging of machine health with warnings and fault code records with export capability
Components (14)
ECM controlled proportional fan speed control system
ECM controlled proportional fan speed control system
 
Tram interlock, machine stability limits
Tram interlock, machine stability limits
Components (23)
Data logging of machine health with warnings, and fault code records; export capability
Data logging of machine health with warnings, and fault code records; export capability
 
-
Components (20)
Cabin pressure manometer with indicator (option)
Cabin pressure manometer with indicator (option)
 
Pre wired for Terrain and Autonomous Operation
Pre wired for Terrain and Autonomous Operation
Components (3)
Rotation torque control
Rotation torque control
 
Virtual rotary head travel stops
Virtual rotary head travel stops
Components (12)
Dust suppression control
Dust suppression control
 
Mast lock indicator
Mast lock indicator
Components (17)
Tram interlock, mast up and locked or down and parked
Tram interlock, mast up and locked or down and parked
 
Tram interlock, jacks retracted
Tram interlock, jacks retracted
Components (1)
All electric controls for drilling, tramming, leveling plus auxiliary functions
All electric controls for drilling, tramming, leveling plus auxiliary functions
 
Electric controls for drilling, tramming, leveling plus auxiliary functions
Electric controls for drilling, tramming, leveling plus auxiliary functions
Components (22)
Prewired for Terrain and autonomous operation
Prewired for Terrain and autonomous operation
 
-
Components (8)
Delayed engine shut down
Delayed engine shut down
 
Filter indicators for hydraulic, fuel, compressor and engine
Filter indicators for hydraulic, fuel, compressor and engine
Components (19)
Cab environment controls (AC, filter, heat, fan speeds)
Cab environment controls (AC, filter, heat, fan speeds)
 
Cab environment controls (AC, heat, fan speeds)
Cab environment controls (AC, heat, fan speeds)
Components (7)
Drill performance and display system
Drill performance and display system
 
Delayed engine shut down
Delayed engine shut down
Components (13)
Mast lock indicator
Mast lock indicator
 
ECM proportional fan speed control system
ECM proportional fan speed control system
Components (6)
Drill depth meter
Drill depth meter
 
Drill performance and display system
Drill performance and display system
Components (2)
Electronic compressor control
Electronic compressor control
 
Rotary torque control
Rotary torque control
Components (4)
Virtual rotary head travel stops and interlocks
Virtual rotary head travel stops and interlocks
 
Pipe positioner engaged/disengaged indicator
Pipe positioner engaged/disengaged indicator
Components (11)
Jack pressure sensors in the display
Jack pressure sensors in the display
 
Dust suppression control
Dust suppression control
Components (5)
Pipe positioner engaged/disengaged indicator
Pipe positioner engaged/disengaged indicator
 
Drill depth meter
Drill depth meter
Components (18)
Tram interlock, jacks retracted
Tram interlock, jacks retracted
 
Tram interlock, winch parked
Tram interlock, winch parked
Components (16)
Tram interlock, pipe in hole
Tram interlock, pipe in hole
 
Tram interlock, mast up and locked or down and parked
Tram interlock, mast up and locked or down and parked
Components (21)
Dust curtain lifting system – auto hydraulic raise front and rear (option)
Dust curtain lifting system – auto hydraulic raise front and rear (option)
 
-
Components (15)
Tram interlock, machine stability limits
Tram interlock, machine stability limits
 
Tram interlock, pipe in hole
Tram interlock, pipe in hole
Components (9)
Rotary head rpm gauge – (digital display in screen)
Rotary head rpm gauge – (digital display in screen)
 
Jack pressure sensors
Jack pressure sensors
Body Length - Standard Cab
13.27 m
43.54 ft
Body Length - Extended Cab
13.79 m
42.24 ft
Width - Rear
6.32 m
20.74 ft
Length - Mast Down - Standard Cab
21.1 m
69.23 ft
Length - Mast Down - Extended Cab
21.62 m
70.87 ft
Height - Mast Up
19.93 m
65.39 ft
Width - Front
5.39 m
17.68 ft
Note (2)
Configuration choices include single pass, multi pass, vertical out to 30 degree angle drilling
Configuration choices include single pass, multi pass, vertical out to 30 degree angle drilling
 
-
Features (12)
Pipe catcher; manual or optional hydraulically actuated
Pipe catcher; manual or optional hydraulically actuated
 
-
Features (4)
Feed system accommodates multiple pipe diameters
Feed system accommodates multiple pipe diameters
 
-
Note (1)
Hydraulic, indexing pipe carousels accept various pipe diameters
Hydraulic, indexing pipe carousels accept various pipe diameters
 
Vertical or angle drilling
Vertical or angle drilling
Features (13)
Tool oiler 113.5 L (30 gal) oil injection system (Rotary drilling only)
Tool oiler 113.5 L (30 gal) oil injection system (Rotary drilling only)
 
-
Features (2)
Pulldown/hoist system is a single cylinder
Pulldown/hoist system is a single cylinder
 
-
Features (1)
13.7 m (44.9 ft) or 17.5 m (57.4 ft) Mast configurations complete with pipe rack carousel
13.7 m (44.9 ft) or 17.5 m (57.4 ft) Mast configurations complete with pipe rack carousel
 
-
Features (9)
Drill pipe positioner
Drill pipe positioner
 
-
Features (10)
Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck (option)
Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck (option)
 
-
Features (3)
Auto tensioning of pull down and hoist cables
Auto tensioning of pull down and hoist cables
 
-
Features (6)
Sliding deck wrench assembly
Sliding deck wrench assembly
 
-
Features (11)
Rotation Gear Box with dual motor arrangement, up to 160 rpm, and 16,000 N∙m of torque (11,800 ft-lb)
Rotation Gear Box with dual motor arrangement, up to 160 rpm, and 16,000 N∙m of torque (11,800 ft-lb)
 
-
Features (15)
Mast access ladder and grating (option)
Mast access ladder and grating (option)
 
-
Features (5)
Variable grip hydraulic break out wrench (HOBO) for range of pipe diameters
Variable grip hydraulic break out wrench (HOBO) for range of pipe diameters
 
-
Features (7)
Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH
Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH
 
-
Features (14)
Mast lanyard mounting provisions (option)
Mast lanyard mounting provisions (option)
 
-
Features (8)
Angle drilling 0-30°; in 5° increments
Angle drilling 0-30°; in 5° increments
 
-
Hole Diameter Range
-
 
251-381 mm (9.875-15 in)
251-381 mm (9.875-15 in)
Pull Down Capacity Up To
-
 
49895 kg
110000 lb
Bit Load Up To
-
 
53845 kg
118719 lb
Rotation Torque Up To
-
 
20880 N·m
15400 lbf
Single Pass Hole Depth Down To
-
 
19.8 m
65 ft
Multi-Pass Hole Depth Down To
-
 
39.5 m
129 ft
Components (4)
Ether starting aid; ether bottle supplied locally
Ether starting aid; ether bottle supplied locally
Components (2)
Scheduled oil sampling (S∙O∙SSM) ports
Scheduled oil sampling (S∙O∙SSM) ports
Components (1)
Dual starter motors
Dual starter motors
Components (3)
Common air intake filters provide +500 hour service interval in normal operating conditions
Common air intake filters provide +500 hour service interval in normal operating conditions
Package (1)
Basic/Manual – Centralized Manual Lube; Gravity Fill for fuel and water
Basic/Manual – Centralized Manual Lube; Gravity Fill for fuel and water
 
Basic Package: Centralized manual lubrication for all pivot points, gravity fill for fuel and water
Basic Package: Centralized manual lubrication for all pivot points, gravity fill for fuel and water
Package (2)
Standard – Fast Fill for fuel and water; Automatic Lubrication System
Standard – Fast Fill for fuel and water; Automatic Lubrication System
 
Standard Package: Automated lubrication system, fast fill for fuel and water (option)
Standard Package: Automated lubrication system, fast fill for fuel and water (option)
Package (3)
Premium – Service center for lubricant drain and fill (compressor oil, hydraulic oil, gearbox oil, engine oil, tool lubrication and grease), Automatic Lubrication System, Fast Fill for fuel and water, blowdown hose
Premium – Service center for lubricant drain and fill (compressor oil, hydraulic oil, gearbox oil, engine oil, tool lubrication and grease), Automatic Lubrication System, Fast Fill for fuel and water, blowdown hose
 
Premium Package: Automated lubrication system, fast fill fuel and water, service center for lubricant drain and fill plus blowdown hose (option)
Premium Package: Automated lubrication system, fast fill fuel and water, service center for lubricant drain and fill plus blowdown hose (option)
Water injection and dry dust collector (option)
– Water tank capacity 1514 L (400 gal)<br>– 204 m³/min (7,200 cfm) dry dust collector<br>– Self-cleaning filters, with auto-eject dust chute
– Water tank capacity 1514 L (400 gal)<br>– 204 m³/min (7,200 cfm) dry dust collector<br>– Self-cleaning filters, with auto-eject dust chute
Water Injection - Standard
– Water tank capacity 1514 L (400 gal)
– Water tank capacity 1514 L (400 gal)
Choices (1)
Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dust collector)
Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dust collector)
Choices (3)
Static dust curtains, four sides boxed in (standard)
Static dust curtains, four sides boxed in (standard)
High Volume Water Injection System - Not Compatible with Basic Service Package
– Water tanks total capacity 3785 L (1,000 gal) maximum<br>– Primary tank above deck – 1514 L (400 gal) capacity (heated for extreme cold weather)<br>– Secondary tank above deck – 2271 L (600 gal) capacity deck
– Water tanks total capacity 3785 L (1,000 gal) maximum<br>– Primary tank above deck – 1514 L (400 gal) capacity (heated for extreme cold weather)<br>– Secondary tank above deck – 2271 L (600 gal) capacity deck
Choices (2)
Tram off spray to wet the ground around the cuttings pile (not recommended for cold weather applications)
Tram off spray to wet the ground around the cuttings pile (not recommended for cold weather applications)
Components (4)
Top Sub, or Shock sub and cross over adapter (option)
Top Sub, or Shock sub and cross over adapter (option)
 
Bit sub
Bit sub
Components (3)
Deck wrench, sliding
Deck wrench, sliding
 
Deck wrench
Deck wrench
Components (5)
Bit sub
Bit sub
 
Top sub
Top sub
Components (1)
Roller deck bushing
Roller deck bushing
 
One-piece roller deck bushing
One-piece roller deck bushing
Components (6)
Pipe wiper seal
Pipe wiper seal
 
Pipe wiper seal
Pipe wiper seal
Components (2)
Pipe positioner inserts
Pipe positioner inserts
 
Pipe positioner clamps
Pipe positioner clamps
Components (7)
-
 
Drill tool lubricator (optional)
Drill tool lubricator (optional)
Rotary Drilling (2)
73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi)
73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi)
Receiver Tank Choice (1)
Low pressure 8.6 bar (125 psi) for ASME/CR N/AU or CE
Low pressure 8.6 bar (125 psi) for ASME/CR N/AU or CE
Rotary Drilling (1)
56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)
56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)
DTH Drilling - Includes Tool Lubrication and Hammer Storage
42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi)
42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi)
Note
With the compressors variable volume control, the operator can limit air output resulting in reduced fuel consumption<br>– Both high and low pressure compressors contain this feature
With the compressors variable volume control, the operator can limit air output resulting in reduced fuel consumption<br>– Both high and low pressure compressors contain this feature
Receiver Tank Choice (2)
High pressure 34.4 bar (500 psi) for ASME/CR N/AU or CE
High pressure 34.4 bar (500 psi) for ASME/CR N/AU or CE
Choice
Electronic compressor control and regulation with purged air lines
Electronic compressor control and regulation with purged air lines
Components (5)
Four (4) lift lugs, for use with cables or chains
Four (4) lift lugs, for use with cables or chains
 
-
Components (7)
Bit storage box in-deck with hinged cover (option)
Bit storage box in-deck with hinged cover (option)
 
-
Components (6)
Walkway around cab to drill deck (option)
Walkway around cab to drill deck (option)
 
-
Features (2)
Slip resistant surface
Slip resistant surface
 
Slip resistant surfaces
Slip resistant surfaces
Features (3)
Fuel tank capacity 1609 L (425 gal)
Fuel tank capacity 1609 L (425 gal)
 
Fuel tank capacity 833 L (220 gal)
Fuel tank capacity 833 L (220 gal)
Components (1)
Stationary rear deck; for vertical and angle drilling
Stationary rear deck; for vertical and angle drilling
 
Three leveling jacks provide leveling on a 7� bench (any orientation)
Three leveling jacks provide leveling on a 7� bench (any orientation)
Components (2)
Four leveling jacks to provide leveling on a 7° bench (any orientation)
Four leveling jacks to provide leveling on a 7° bench (any orientation)
 
Heavy duty tow hooks (non-drill end)
Heavy duty tow hooks (non-drill end)
Features (6)
Three egress points on deck areas in addition to main access
Three egress points on deck areas in addition to main access
 
-
Components (10)
Drill pipe thread greaser with remote fill tank or disposable grease bucket (option)
Drill pipe thread greaser with remote fill tank or disposable grease bucket (option)
 
-
Features (7)
Sturdy guardrails, toe guards, self closing gates
Sturdy guardrails, toe guards, self closing gates
 
-
Components (4)
Heavy duty tow hooks (front end)
Heavy duty tow hooks (front end)
 
-
Components (3)
Manual, centralized, lubrication banks for all pivot points on drill, or automated lubrication system (option)
Manual, centralized, lubrication banks for all pivot points on drill, or automated lubrication system (option)
 
Four (4) lift lugs, for use with cables or chains
Four (4) lift lugs, for use with cables or chains
Components (8)
DTH hammer storage on drill deck with high pressure configuration (option)
DTH hammer storage on drill deck with high pressure configuration (option)
 
-
Features (4)
Fuel capacity expansion for additional +1609 L (425 gal)
Fuel capacity expansion for additional +1609 L (425 gal)
 
-
Features (5)
Bolt-on platform for cold weather generator or fire suppression bottles (option)
Bolt-on platform for cold weather generator or fire suppression bottles (option)
 
-
Components (9)
Hydraulically operated viewing hatch in drill deck with spotlight (option)
Hydraulically operated viewing hatch in drill deck with spotlight (option)
 
-
Features (1)
Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life
Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life
 
Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life
Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life
Components (2)
Separate engine cooling module
Separate engine cooling module
 
-
 
All cooler core sections are replaceable
All cooler core sections are replaceable
Components (1)
Coolers with easy cleaning access
Coolers with easy cleaning access
 
-
 
Coolers with easy cleaning access
Coolers with easy cleaning access
Components (3)
Replaceable cooler core sections
Replaceable cooler core sections
 
-
 
Functional in ambient temperature of up to 52� C (125� F)
Functional in ambient temperature of up to 52� C (125� F)
Components (4)
Automatic variable speed fan control
Automatic variable speed fan control
 
-
 
Automatic variable speed fan control
Automatic variable speed fan control
Features
Functional in ambient temperature of 52° C (125° F)
Functional in ambient temperature of 52° C (125° F)
 
Functional in ambient temperature of 52° C (125° F)
Functional in ambient temperature of 52° C (125° F)
 
-
Components (6)
Wiring for third party interface
Wiring for third party interface
 
Product Link™
Product Link™
 
-
Components (3)
Drill assist (single or multipass auto drill) (options)
Drill assist (single or multipass auto drill) (options)
 
Drill depth meter
Drill depth meter
 
Cat Terrain ready
Cat Terrain ready
Components (5)
Optional Command for Drilling enables each operator to manage more than one machine
Optional Command for Drilling enables each operator to manage more than one machine
 
Electric controls for drilling, tramming, leveling plus auxiliary functions
Electric controls for drilling, tramming, leveling plus auxiliary functions
 
-
Type
Autonomy ready
Autonomy ready
 
-
 
-
Components (2)
Auto level, auto retract, auto mast
Auto level, auto retract, auto mast
 
Multi pass auto drill/drill assist
Multi pass auto drill/drill assist
 
Drill Assist Automated Functionality (onboard technology):<br>- Auto Level (with auto retract jacks)<br>- Auto Mast (raise, lower and lock into place)<br>- Auto Dril (single pass)
Drill Assist Automated Functionality (onboard technology):<br>- Auto Level (with auto retract jacks)<br>- Auto Mast (raise, lower and lock into place)<br>- Auto Dril (single pass)
Components (1)
Drill depth indicator and interlocks
Drill depth indicator and interlocks
 
Single pass auto drill/drill assist
Single pass auto drill/drill assist
 
Drill depth meter
Drill depth meter
Optional Cat Terrain for Drills - Mining System Interface
– Production<br>– Navigation
– Production<br>– Navigation
 
-
 
-
Components (4)
Product Link Elite (hardware from factory, subscription package via dealer)
Product Link Elite (hardware from factory, subscription package via dealer)
 
Auto level, auto retract jacks, auto raise and lower mast
Auto level, auto retract jacks, auto raise and lower mast
 
Product Link™ Elite
Product Link™ Elite
Type (1)
-
 
Radio-ready for communication and entertainment radio
Radio-ready for communication and entertainment radio
 
Autonomous ready
Autonomous ready
Type (2)
-
 
Integrated Terrain for Drilling complete with wiring and harnesses
Integrated Terrain for Drilling complete with wiring and harnesses
 
-
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary (1)
203 mm
8 in
 
-
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: DTH
178 mm
7 in
 
-
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary or DTH
194 mm
7.625 in
 
-
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary (2)
219 mm
8.625 in
 
-
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary
235 mm
9.25 in
 
-
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary (2)
219 mm
8.625 in
 
-
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary (1)
203 mm
8 in
 
-
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: DTH
178 mm
7 in
 
-
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary or DTH
194 mm
7.625 in
 
-
Note
Dual purpose carousel pipe: 13.7 m (44.9 ft) Mast; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)<ul><li>Dual purpose pipe carousel accepts 194 mm (7.625 in) pipe – contact factory for additional pipe diameters</li></ul>
Dual purpose carousel pipe: 13.7 m (44.9 ft) Mast; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)<ul><li>Dual purpose pipe carousel accepts 194 mm (7.625 in) pipe – contact factory for additional pipe diameters</li></ul>
 
-
9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 5
-
 
152 mm
6 in
9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 4
-
 
140 mm
5.5 in
Climate Level 2 Arctic Fluids and Lubricants
Rated down to –18° C (–0.4° F) temperatures
Rated down to –18° C (–0.4° F) temperatures
 
– Temperatures down to –18° C (–0.4° F)
– Temperatures down to –18° C (–0.4° F)
 
-
Climate Level 1 Standard Fluids and Lubricants (1)
Rated down to –1° C (30° F) temperatures
Rated down to –1° C (30° F) temperatures
 
– Temperature range of –1° C (30° F) to 52° C (125° F)
– Temperature range of –1° C (30° F) to 52° C (125° F)
 
Rated down to -1C (30 F)
Rated down to -1C (30 F)
Climate Level 1 Standard Fluids and Lubricants (2)
Withstands high heat to 52° C (125° F)
Withstands high heat to 52° C (125° F)
 
-
 
Withstands high heat up to 52 C (125 F)
Withstands high heat up to 52 C (125 F)
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (6)
Breaker panel includes five (5) additional breakers for locally supplied heating elements, if needed
Breaker panel includes five (5) additional breakers for locally supplied heating elements, if needed
 
-
 
-
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (3)
Full arctic lubricant package includes: engine oil, compressor oil and hydraulic oil
Full arctic lubricant package includes: engine oil, compressor oil and hydraulic oil
 
-
 
-
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (1)
Rated down to –40° C (–40° F) temperatures
Rated down to –40° C (–40° F) temperatures
 
-
 
-
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (5)
Shore power connection box with switchable 240-600V (50 amp) connection; diesel genset and or plug, sold separately
Shore power connection box with switchable 240-600V (50 amp) connection; diesel genset and or plug, sold separately
 
-
 
-
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (2)
Diesel fired heating system that heats and circulates engine coolant through the: engine block, primary water tank, heating elements for battery trays with a provision for fuel tanks
Diesel fired heating system that heats and circulates engine coolant through the: engine block, primary water tank, heating elements for battery trays with a provision for fuel tanks
 
-
 
-
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (4)
Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, compressor control box, heat trace for compressor control lines, heat trace for housing from water tank to water pump and water fast-fill assembly plus tank
Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, compressor control box, heat trace for compressor control lines, heat trace for housing from water tank to water pump and water fast-fill assembly plus tank
 
-
 
-
Climate Level 2 Arctic Fluids and Lubricants, Engine Block and Manifold Heater 120V or 240V
-
 
-
 
Rated down to -18 C (0 F)
Rated down to -18 C (0 F)
Cable Diameter
13 mm
0.5 in
Winch Reach - Past The Drill Deck
6.1 m
20 ft
Capacity Rating
1814 kg
4000 lb
Note
Variable speed control
Variable speed control
Lighting
– LED interior lights; separate reading light, and backlit joysticks and keypads<br>– Zone controls for area lights and spot lighting for night drilling<br>– Flood lights for the drill perimeter<br>– Spot lights for power group area; drill deck; mast carousel; access ladder and walkways<br>– Standard lighting is Halogen, 1,300 lumens flood light on perimeter, area spot lights have 1,950 lumens<br>– Premium lighting is LED, 4,200 lumens flood light on perimeter (option)<br>– Mast clearance lights, cab mounted strobe, front mounted tram beacon (option)
– LED interior lights; separate reading light, and backlit joysticks and keypads<br>– Zone controls for area lights and spot lighting for night drilling<br>– Flood lights for the drill perimeter<br>– Spot lights for power group area; drill deck; mast carousel; access ladder and walkways<br>– Standard lighting is Halogen, 1,300 lumens flood light on perimeter, area spot lights have 1,950 lumens<br>– Premium lighting is LED, 4,200 lumens flood light on perimeter (option)<br>– Mast clearance lights, cab mounted strobe, front mounted tram beacon (option)
 
-
 
- LED interior lights, backlit joysticks and keypads<br>- Flood lights for the drill perimeter; area spotlights<br>- Mast beacon and tram flashing strobe light (option)
- LED interior lights, backlit joysticks and keypads<br>- Flood lights for the drill perimeter; area spotlights<br>- Mast beacon and tram flashing strobe light (option)
Components (7)
Operator station design integrates an ergonomic seat, armchair joystick controls with full instrumentation, and two 254 mm (10 in) color, high definition touchscreens and 12 volt power port
Operator station design integrates an ergonomic seat, armchair joystick controls with full instrumentation, and two 254 mm (10 in) color, high definition touchscreens and 12 volt power port
 
-
 
-
Components (4)
Drill performance touchscreen display
Drill performance touchscreen display
 
-
 
-
Components (3)
Cab perimeter walkway available for both cab sizes
Cab perimeter walkway available for both cab sizes
 
-
 
-
Components (1)
Spacious FOPS cab has 3 m² (32.4 ft²) floor space with an integrated operator station
Spacious FOPS cab has 3 m² (32.4 ft²) floor space with an integrated operator station
 
-
 
-
Components (13)
Seat swivels, locks and has two point/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in)
Seat swivels, locks and has two point/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in)
 
-
 
-
Components (9)
Power convertor 24V to 12V
Power convertor 24V to 12V
 
-
 
-
Components (2)
Extended cab option 4.2 m² (45.2 ft²); prewired and dedicated space for refrigerator and microwave
Extended cab option 4.2 m² (45.2 ft²); prewired and dedicated space for refrigerator and microwave
 
-
 
-
HVAC
– Floor vents in the foot rest area<br>– Roof-mounted air conditioner/heating/pressurizing unit<br>– Filter access from deck, does not require roof access, and has approximately 500 hour service interval<br>– Defogging HVAC vents on driller window
– Floor vents in the foot rest area<br>– Roof-mounted air conditioner/heating/pressurizing unit<br>– Filter access from deck, does not require roof access, and has approximately 500 hour service interval<br>– Defogging HVAC vents on driller window
 
-
 
- Floor heating vent<br>- Filter access from deck, 500 hour service interval<br>- Defogging HVAC vents on main window
- Floor heating vent<br>- Filter access from deck, 500 hour service interval<br>- Defogging HVAC vents on main window
Components (6)
Two swing-out hinged doors with windows and Cat keyed locks
Two swing-out hinged doors with windows and Cat keyed locks
 
-
 
-
Components (14)
Trainer’s seat that folds away and has retractable seat belt (optional)
Trainer’s seat that folds away and has retractable seat belt (optional)
 
-
 
-
Cameras
– Mounted on the front and left sides to provide 360° view from operator's seat<br>– Camera on the mast to view pipe carousel/top drive operation
– Mounted on the front and left sides to provide 360° view from operator's seat<br>– Camera on the mast to view pipe carousel/top drive operation
 
-
 
- Three (3) CC cameras (front, right and left sides) provide 360° visibility from operators seat; camera on the mast to view pipe carousel/top drive operation
- Three (3) CC cameras (front, right and left sides) provide 360° visibility from operators seat; camera on the mast to view pipe carousel/top drive operation
Components (5)
Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise
Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise
 
-
 
-
Components (10)
Radio-ready for communication and entertainment radio
Radio-ready for communication and entertainment radio
 
-
 
-
Cab - Premium
– Leather seat with heat and ventilation<br>– Dual pane window glass<br>– Front window guard<br>– Additional in-cab storage box<br>– Additional windshield wipers on front and rear windows<br>– Window shades (option)<br>– Foldaway trainer’s seat (option)<br>– Removable floor mat
– Leather seat with heat and ventilation<br>– Dual pane window glass<br>– Front window guard<br>– Additional in-cab storage box<br>– Additional windshield wipers on front and rear windows<br>– Window shades (option)<br>– Foldaway trainer’s seat (option)<br>– Removable floor mat
 
– Includes a leather seat with heat and ventilation, heavy duty suspension, dual pane window glass<br>– Additional storage plus windshield wipers on front and rear windows<br>– Removable driller window guard plus front window guard and trainer seat
– Includes a leather seat with heat and ventilation, heavy duty suspension, dual pane window glass<br>– Additional storage plus windshield wipers on front and rear windows<br>– Removable driller window guard plus front window guard and trainer seat
 
-
Components (11)
Cab roof access ladder (option)
Cab roof access ladder (option)
 
-
 
-
Cab - Standard
– Fabric seat<br>– Single pane window glass<br>– Windshield wiper for driller window<br>– Window shades (option)<br>– Foldaway trainer’s seat (option)<br>– Removable floor mat
– Fabric seat<br>– Single pane window glass<br>– Windshield wiper for driller window<br>– Window shades (option)<br>– Foldaway trainer’s seat (option)<br>– Removable floor mat
 
– Includes a fabric seat, single pane window glass, shades, and a windshield wiper for driller window, removable driller window guard and a trainer seat
– Includes a fabric seat, single pane window glass, shades, and a windshield wiper for driller window, removable driller window guard and a trainer seat
 
-
Components (8)
Additional display screen for cc cameras; color, high-definition 254 mm (10 in)
Additional display screen for cc cameras; color, high-definition 254 mm (10 in)
 
-
 
-
Components (12)
Literature holder
Literature holder
 
-
 
-
Cab Design
-
 
-
 
Falling Object Protective Structure (FOPS) certified cab includes:<br>- Rubber shock-mounts to absorb mechanical vibration<br>- Operator station design that integrates an ergonomic seat, joystick controls with full instrumentation, dual 254 mm (10 in) high-definition color screens and 12 volt power port<br>- Additional display screen for cc cameras; color, high-definition 254 mm (10 in)<br>- Power convertor 24V to 12V<br>- Radio-ready for communication and entertainment stereo<br>- Two swing out doors and Cat keyed locks<br>- Literature holder<br>- Storage area suitable for lunchbox
Falling Object Protective Structure (FOPS) certified cab includes:<br>- Rubber shock-mounts to absorb mechanical vibration<br>- Operator station design that integrates an ergonomic seat, joystick controls with full instrumentation, dual 254 mm (10 in) high-definition color screens and 12 volt power port<br>- Additional display screen for cc cameras; color, high-definition 254 mm (10 in)<br>- Power convertor 24V to 12V<br>- Radio-ready for communication and entertainment stereo<br>- Two swing out doors and Cat keyed locks<br>- Literature holder<br>- Storage area suitable for lunchbox
Cab Packages
-
 
-
 
<b>Standard configuration</b> includes a fabric seat, removable floor mat, single pane window glass and driller window guard<br><b>Premium configuration</b> includes a leather seat with heat and ventilation, heavy duty suspension, dual pane window glass and driller window guard.
<b>Standard configuration</b> includes a fabric seat, removable floor mat, single pane window glass and driller window guard<br><b>Premium configuration</b> includes a leather seat with heat and ventilation, heavy duty suspension, dual pane window glass and driller window guard.
Seating
-
 
-
 
- Swivel seat is fully ergonomic, with tilt (5° adjustment), lumbar support, and fore/aft seat adjustment 80 mm (3.1 in)<br>- Seat locks and has two point retractable, 76 mm (3 in) seat belt
- Swivel seat is fully ergonomic, with tilt (5° adjustment), lumbar support, and fore/aft seat adjustment 80 mm (3.1 in)<br>- Seat locks and has two point retractable, 76 mm (3 in) seat belt
Windows
-
 
-
 
- Large windows on the front, rear and right cab side; full length drill window with guard<br>- Window shades (option)<br>- Windshield wiper with a common washer tank<br>- Manometer Pressure Gauge (option)
- Large windows on the front, rear and right cab side; full length drill window with guard<br>- Window shades (option)<br>- Windshield wiper with a common washer tank<br>- Manometer Pressure Gauge (option)
Components (4)
Virtual rotary head travel stops and interlocks
Virtual rotary head travel stops and interlocks
 
-
Components (3)
Rotary torque control
Rotary torque control
 
Virtual rotary head travel interlocks
Virtual rotary head travel interlocks
Components (2)
Rotation gear box with dual motor arrangement, up to 160 rpm, and 16 000 N∙m (11,800 lbf-ft) of torque
Rotation gear box with dual motor arrangement, up to 160 rpm, and 16 000 N∙m (11,800 lbf-ft) of torque
 
Virtual rotary head travel interlocks
Virtual rotary head travel interlocks
Components (1)
Spindle with 168 mm (6.625 in) API regular thread and splined collar
Spindle with 168 mm (6.625 in) API regular thread and splined collar
 
Rotary torque control
Rotary torque control
Torque - Single Motor
-
 
8360 N·m
6166 lb/ft
Rotation Speed
-
 
0-150 rpm
0-150 rpm
Components (2)
One (1) auxiliary circuit pump – 110 cc (piston, load sensing)
One (1) auxiliary circuit pump – 110 cc (piston, load sensing)
 
One (1) auxiliary circuit pump – 145 cc (piston, load sensing)
One (1) auxiliary circuit pump – 145 cc (piston, load sensing)
 
One (1) auxiliary circuit pump: 45 cc (piston, load sensing)
One (1) auxiliary circuit pump: 45 cc (piston, load sensing)
Components (3)
Two (2) fan pumps – 1,000 cc (piston, with proportional electronic controls)
Two (2) fan pumps – 1,000 cc (piston, with proportional electronic controls)
 
Two (2) fan pumps – 100 cc (piston with proportional electronic controls)
Two (2) fan pumps – 100 cc (piston with proportional electronic controls)
 
One (1) fan pump: 45 cc (piston with proportional electronic controls)
One (1) fan pump: 45 cc (piston with proportional electronic controls)
Components (1)
Two (2) primary pumps – 210 cc (piston, with proportional electronic controls)
Two (2) primary pumps – 210 cc (piston, with proportional electronic controls)
 
Two (2) primary pumps – 280 cc (piston with proportional electronic controls)
Two (2) primary pumps – 280 cc (piston with proportional electronic controls)
 
Two (2) main pumps: 85 cc (piston with proportional electronic controls)
Two (2) main pumps: 85 cc (piston with proportional electronic controls)
Components (4)
Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement)
Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement)
 
Two (2) charge pumps – 74 cc (fixed displacement)
Two (2) charge pumps – 74 cc (fixed displacement)
 
One (1) charge pump: 73.8 cc (gear, fixed displacement)
One (1) charge pump: 73.8 cc (gear, fixed displacement)
Components (5)
Scheduled Oil Sampling (S∙O∙S) ports
Scheduled Oil Sampling (S∙O∙S) ports
 
Scheduled Oil Sampling (S·O·SSM) ports
Scheduled Oil Sampling (S·O·SSM) ports
 
Scheduled Oil Sampling (S-O-S SM) ports
Scheduled Oil Sampling (S-O-S SM) ports
Components (1)
Two piece bushing
Two piece bushing
 
Two-piece bushing
Two-piece bushing
Components (6)
Pipe wiper seal
Pipe wiper seal
 
Pipe wiper seal
Pipe wiper seal
Components (4)
Shock sub and top sub adapter
Shock sub and top sub adapter
 
Shock sub
Shock sub
Components (5)
Cross over hammer adapter
Cross over hammer adapter
 
Cross over subs
Cross over subs
Components (3)
Deck wrench, sliding
Deck wrench, sliding
 
Deck wrench
Deck wrench
Components (2)
Pipe positioner inserts
Pipe positioner inserts
 
Pipe positioner clamps
Pipe positioner clamps
Components (8)
-
 
Top sub
Top sub
Components (7)
-
 
Drill tool lubricator is included with selection of DTH Compressor
Drill tool lubricator is included with selection of DTH Compressor
Choice (1)
Fixed access ladder to the cab area
Fixed access ladder to the cab area
 
Fixed access steps to the cab area
Fixed access steps to the cab area
Choice (3)
Cab perimeter walkway available with either choice
Cab perimeter walkway available with either choice
 
Platform access to the cab with full length service access walkway includes fixed access steps and self-closing gates
Platform access to the cab with full length service access walkway includes fixed access steps and self-closing gates
Choice (2)
Cascading, hydraulic stairs to cab area (option) – includes jack and tram interlock that activates when the stairs are down
Cascading, hydraulic stairs to cab area (option) – includes jack and tram interlock that activates when the stairs are down
 
Small platform to the cab includes fixed access steps
Small platform to the cab includes fixed access steps
Mast Accessories Hydraulic (2)
One hydraulic pipe catcher, plus one wire rope, hydraulically actuated pipe positioner, hydraulic bit basket
One hydraulic pipe catcher, plus one wire rope, hydraulically actuated pipe positioner, hydraulic bit basket
 
-
Mast Accessories Hydraulic (1)
One hydraulic pipe catcher, hydraulically actuated pipe positioner, hydraulic bit basket
One hydraulic pipe catcher, hydraulically actuated pipe positioner, hydraulic bit basket
 
-
Angle Drilling
Included with either mast
Included with either mast
 
-
Mast Accessories Manual, 17.5 m (57.4 ft) Mast
Two wire rope pipe catchers, hydraulically actuated pipe positioner, manual bit basket
Two wire rope pipe catchers, hydraulically actuated pipe positioner, manual bit basket
 
-
Mast Accessories Manual, 13.7 m (44.9 ft) Mast
One wire rope pipe catcher, hydraulically actuated pipe positioner, manual bit basket
One wire rope pipe catcher, hydraulically actuated pipe positioner, manual bit basket
 
-
Single-Pass Depth
-
 
11 m
36 ft
Multi-Pass Depth
-
 
Down to 47.58 m (Down to 156 ft)
Down to 47.58 m (Down to 156 ft)
Pulldown - Rated Single Cylinder Pull-Down/Hoist System
-
 
Up to 15 876 kg (Up to 35,000 lb)
Up to 15 876 kg (Up to 35,000 lb)
Hoist
-
 
Up to 11 907 kg (Up to 26,250 lb)
Up to 11 907 kg (Up to 26,250 lb)
13.7 m (44.9 ft) Mast Carousel; holds quantity of 4 × 12.19 m (40 ft) pipes; total depth 62.5 m (204.9 ft): Pipe diameters
178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)
178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)
13.7 m (44.9 ft) Mast Carousel; holds quantity of 5 × 12.19 m (40 ft) pipes; total depth 74.6 m (244.9 ft): Pipe diameters
194 mm (7.625 in), 219 mm (8.625 in)
194 mm (7.625 in), 219 mm (8.625 in)
17.5 m (57.4 ft) Mast Carousel; holds quantity of 2 × 7.62 m (25 ft) pipes; total depth 32.7 m (107.4 ft): Pipe diameter
235 mm
9.25 in
17.5 m (57.4 ft) Mast Carousel; holds quantity of 4 × 7.62 m (25 ft) pipes; total depth 48 m (157.5 ft): Pipe diameters
178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)
178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)
Note
13.7 m (44.9 ft) Mast Carousel, dual purpose; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)<ul><li>Accepts 194 mm (7.625 in) pipe – contact factory for additional pipe diameters</li></ul>
13.7 m (44.9 ft) Mast Carousel, dual purpose; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)<ul><li>Accepts 194 mm (7.625 in) pipe – contact factory for additional pipe diameters</li></ul>
Option
Bushing Retention Tool 178 to 235 mm (7.00 to 9.25 in) pipe diameter
Bushing Retention Tool 178 to 235 mm (7.00 to 9.25 in) pipe diameter
Lifting Bails (Available on Request)
– 114 mm (4.5 in) API reg thread<br>– 140 mm (5.5 in) API reg thread<br>– 168 mm (6.625 in) for top sub/shock sub API thread<br>– 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread<br>– 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO thread
– 114 mm (4.5 in) API reg thread<br>– 140 mm (5.5 in) API reg thread<br>– 168 mm (6.625 in) for top sub/shock sub API thread<br>– 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread<br>– 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO thread
Working Weight Range - Minimum/Maximum
75 800/97 000 kg (167,110/213,848 lb)
75 800/97 000 kg (167,110/213,848 lb)
Variable Grip Hydraulic Break Out Wrench Grip Ranges (2)
235 mm (9.25 in)
235 mm (9.25 in)
Variable Grip Hydraulic Break Out Wrench Grip Ranges (1)
178-219 mm (7.0-8.625 in)
178-219 mm (7.0-8.625 in)
Working Weight Range - Minimum/Maximum
75 500/97 500 kg (166,449/214,950 lb)
75 500/97 500 kg (166,449/214,950 lb)
Power Rating (ISO 14396)
949 kW
1273 HP
Emissions (1)
U.S. EPA Tier 2/EU Stage II equivalent
U.S. EPA Tier 2/EU Stage II equivalent
Power Rating (J1995)
960 kW
1287 HP
Engine
Cat® 3512C @ 1,800 rpm
Cat® 3512C @ 1,800 rpm
Choice
Rotary, single stage, low pressure 101.9 m³/min (3,600 ft³/min) @ 6.9 bar (100 psi); with low pressure receiver tank for ASME/CRN/AU or CE
Rotary, single stage, low pressure 101.9 m³/min (3,600 ft³/min) @ 6.9 bar (100 psi); with low pressure receiver tank for ASME/CRN/AU or CE
Accessory (1)
Pipe positioner (stabilizer) engaged/disengaged indicator, and interlock
Pipe positioner (stabilizer) engaged/disengaged indicator, and interlock
Accessory (2)
One hydraulic pipe catcher
One hydraulic pipe catcher
Accessory (3)
Hydraulic pipe support in the upper section of the mast
Hydraulic pipe support in the upper section of the mast
Feature
LH/RH pipe racks hold 9.906 m (32.5 ft) drill pipe
LH/RH pipe racks hold 9.906 m (32.5 ft) drill pipe
324 mm (12.75 in) diameter
– Single pipe rack<br>– Dust collector side only<br>– Single pass only
– Single pipe rack<br>– Dust collector side only<br>– Single pass only
340 mm (13.375 in) diameter
– Single pipe rack<br>– Dust collector side only<br>– Single pass only
– Single pipe rack<br>– Dust collector side only<br>– Single pass only
219 mm (8.625 in) diameter
– LH and RH, double pipe rack<br>– Capable of single and multi-pass<br>– Primary loader @ 29.68 m (97.4 ft)<br>– Secondary loader @ 39.59 m (129.9 ft)
– LH and RH, double pipe rack<br>– Capable of single and multi-pass<br>– Primary loader @ 29.68 m (97.4 ft)<br>– Secondary loader @ 39.59 m (129.9 ft)
273 mm (10.75 in) diameter
– LH and RH, double pipe rack<br>– Capable of single and multi-pass<br>– Primary loader @ 29.68 m (97.4 ft)<br>– Secondary loader @ 39.59 m (129.9 ft)
– LH and RH, double pipe rack<br>– Capable of single and multi-pass<br>– Primary loader @ 29.68 m (97.4 ft)<br>– Secondary loader @ 39.59 m (129.9 ft)
235 mm (9.25 in) diameter
– LH and RH, double pipe rack<br>– Capable of single and multi-pass<br>– Primary loader @ 29.68 m (97.4 ft)<br>– Secondary loader @ 39.59 m (129.9 ft)
– LH and RH, double pipe rack<br>– Capable of single and multi-pass<br>– Primary loader @ 29.68 m (97.4 ft)<br>– Secondary loader @ 39.59 m (129.9 ft)
Variable Grip
– 219, 235, 273 mm (8.625, 9.25, 10.75 in)<br>– 324, 340 mm (12.75, 13.375 in)
– 219, 235, 273 mm (8.625, 9.25, 10.75 in)<br>– 324, 340 mm (12.75, 13.375 in)
One piece roller deck bushing, pipe positioner, deck wrench, bit sub, pipe wiper seal
– 219 mm (8.625 in)<br>– 235 mm (9.25 in)<br>– 273 mm (10.75 in)<br>– 324 mm (12.75 in)<br>– 340 mm (13.375 in)
– 219 mm (8.625 in)<br>– 235 mm (9.25 in)<br>– 273 mm (10.75 in)<br>– 324 mm (12.75 in)<br>– 340 mm (13.375 in)
Shock absorber with top sub adapter - available in Standard or Premium
– 219 mm (8.625 in)<br>– 235 mm (9.25 in)<br>– 273 mm (10.75 in)<br>– 324 mm (12.75 in)<br>– 340 mm (13.375 in)
– 219 mm (8.625 in)<br>– 235 mm (9.25 in)<br>– 273 mm (10.75 in)<br>– 324 mm (12.75 in)<br>– 340 mm (13.375 in)
Service Package - Standard
– Fast fill fuel and water only<br>– Automated lubricant system
– Fast fill fuel and water only<br>– Automated lubricant system
Service Package - Premium
– Service center for lubricant drain and fill<br>– Fast fill fuel and water<br>– Automated lubricant system
– Service center for lubricant drain and fill<br>– Fast fill fuel and water<br>– Automated lubricant system
Water Injection System
2271 l
600 gal (US)
Water Injection System, High Volume Total Tank Capacity
5299 l
1400 gal (US)
Water Injection System, High Volume Total Tank Capacity (Note 1)
2271 L (600 gal) below deck mounted tank
2271 L (600 gal) below deck mounted tank
Water Injection System (Note 1)
Tank below deck
Tank below deck
Water Injection/Dry Dust Collection
2271 l
600 gal (US)
Water Injection System, High Volume Total Tank Capacity (Note 2)
3028 L (800 gal) above deck mounted tank
3028 L (800 gal) above deck mounted tank
Water Injection System (Note 2)
Fast fill
Fast fill
Water Injection/Dry Dust Collection (Note 2)
Fast fill
Fast fill
Water Injection/Dry Dust Collection (Note 1)
Tank below deck
Tank below deck
Water Injection/Dry Dust Collection (Note 3)
204 m³/min (7,200 ft³/min) dry dust collection
204 m³/min (7,200 ft³/min) dry dust collection
Water Injection System, High Volume Total Tank Capacity (Note 3)
Fast fill
Fast fill
Note (2)
Six (6) each batteries, sealed<br>– Required for semi/full autonomy packages
Six (6) each batteries, sealed<br>– Required for semi/full autonomy packages
Note (1)
Four (4) each batteries, sealed
Four (4) each batteries, sealed
Height mast up
26.7 m
87.6 ft
 
16.54 m
54.3 ft
Height mast down
6.6 m
21.7 ft
 
3.58 m
11.75 ft
Length mast down
28.3 m
92.9 ft
 
17.54 m
57.5 ft
Note
*Working Length Mast Up with bolt-on platform adds 1.2 m (4 ft) for total of 15.9 m (52.1 ft)
*Working Length Mast Up with bolt-on platform adds 1.2 m (4 ft) for total of 15.9 m (52.1 ft)
 
*Contact the factory for width with platform access to cab or service platform walkway.
*Contact the factory for width with platform access to cab or service platform walkway.
Working Width (non-drill end)
6.06 m
19.9 ft
 
-
Working Width (drill end)
6.89 m
22.6 ft
 
-
Mast Only Shipping Length
25.24 m
82.8 ft
 
-
Working Length Mast Up*
14.7 m
48.1 ft
 
-
Width cab end*
-
 
4.18 m
13.7 ft
Width non-cab end
-
 
3.57 m
11.7 ft
Body Length
-
 
9.44 m
31 ft
Mast only length
-
 
15.89 m
52.1 ft
Mast Only
40000 kg
88184 lb
 
-
Without Mast
102300 kg
225533 lb
 
-
Working Weight Range
142 300 kg (313,717 lb)
142 300 kg (313,717 lb)
 
40 823 - 45 359 kg (90,000 - 100,000 lb)
40 823 - 45 359 kg (90,000 - 100,000 lb)
DTH Drilling
Includes tool lubrication system
Includes tool lubrication system
Rotary Drilling
Optional tool lubrication system
Optional tool lubrication system
Note
With the compressor's electronic controls plus variable volume control, the operator can adjust air output to reach optimal match of tool, flushing air and ground conditions. Both high and low pressure compressors contain this feature.
With the compressor's electronic controls plus variable volume control, the operator can adjust air output to reach optimal match of tool, flushing air and ground conditions. Both high and low pressure compressors contain this feature.
DTH Drilling - 1050 cfm/350 psi
29.7 cmm (1,050 cfm) @ 24.1 bar (350 psi) with 113.5 L (30 gal) tool oiler
29.7 cmm (1,050 cfm) @ 24.1 bar (350 psi) with 113.5 L (30 gal) tool oiler
Rotary Drilling - 1150 cfm/125 psi
32.6 cmm (1,150 cfm) @ 8.6 bar (125 psi)
32.6 cmm (1,150 cfm) @ 8.6 bar (125 psi)
Choice (1)
Low pressure 8.6 bar (125 psi)
Low pressure 8.6 bar (125 psi)
Choice (2)
High pressure 24.1 bar (350 psi)
High pressure 24.1 bar (350 psi)
Components (1)
Drill pipe thread greaser with remote fill tank that also accommodates disposable grease bucket
Drill pipe thread greaser with remote fill tank that also accommodates disposable grease bucket
High Volume Water Injection - Maximum - Tank Above Deck - Capacity
757 l
200 gal (US)
Water Injection - Tank Mounted Below Front Deck - Components
Water flow meter, volume control, tank fill level indicator
Water flow meter, volume control, tank fill level indicator
High Volume Water Injection - Maximum - Tank Below Deck - Capacity
757 l
200 gal (US)
Water Injection - Tank Mounted Below Front Deck
757 l
200 gal (US)
High Volume Water Injection - Maximum - Tanks Total Capacity
1514 l
400 gal (US)
Water Injection plus Dust Collector (1)
76.5 cmm (2,700 cfm) dust collector; includes standard water injection
76.5 cmm (2,700 cfm) dust collector; includes standard water injection
Water Injection plus Dust Collector (2)
Self-cleaning filters, dust chute clean-out door
Self-cleaning filters, dust chute clean-out door
Choices (1)
Static dust curtains, four sides boxed enclosed
Static dust curtains, four sides boxed enclosed
Choices (2)
Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dry dust collector)
Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dry dust collector)
Choices (3)
Tram off spray system (option)
Tram off spray system (option)
Feature (3)
Tier 4 Final package complete with DEF/Engine Shutdown Control Package
Tier 4 Final package complete with DEF/Engine Shutdown Control Package
Feature (1)
Dual starter motors
Dual starter motors
Feature (2)
Ether starting aid
Ether starting aid
Features (1)
Pipe carousel:<br>Accepts quantity of four (4) 9.14 m (30 ft) pipes
Pipe carousel:<br>Accepts quantity of four (4) 9.14 m (30 ft) pipes
Features (2)
Standard angle drilling package (0 to 30 degrees, in�5-degree�increments)
Standard angle drilling package (0 to 30 degrees, in�5-degree�increments)
Features (4)
Hydraulically actuated, self-indexing pipe carousel accepts pipe diameters up to 152 mm (6.0 in)
Hydraulically actuated, self-indexing pipe carousel accepts pipe diameters up to 152 mm (6.0 in)
Features (5)
Drills strings configured for bit changes above deck
Drills strings configured for bit changes above deck
Features (6)
Single cylinder pulldown/hoist system
Single cylinder pulldown/hoist system
Features (7)
Sliding deck wrench assembly
Sliding deck wrench assembly
Features (8)
Configured with roller deck bushing (for low pressure/tricone drilling)
Configured with roller deck bushing (for low pressure/tricone drilling)
Features (9)
Two-piece deck bushing (for high pressure DTH drilling)
Two-piece deck bushing (for high pressure DTH drilling)
Features (10)
Overhead winch with cable and hook plus remote control; variable speed drive with a 1361 kg (3,000 lb) rating
Overhead winch with cable and hook plus remote control; variable speed drive with a 1361 kg (3,000 lb) rating
Features (11)
Variable grip hydraulic break out wrench grip range 101-152 mm (4.0-6.0 in)
Variable grip hydraulic break out wrench grip range 101-152 mm (4.0-6.0 in)
Features (12)
Closed circuit camera mounted in mast to view pipe carousel/top drive operation
Closed circuit camera mounted in mast to view pipe carousel/top drive operation
Features (13)
Pipe positioner for angle drilling, multi-pass pipe handling
Pipe positioner for angle drilling, multi-pass pipe handling
Features (14)
Manual pipe catcher: One (1) wire rope, pipe catcher, pipe positioner, optional manual bit basket
Manual pipe catcher: One (1) wire rope, pipe catcher, pipe positioner, optional manual bit basket
X
This site uses and sets "cookies" on your computer to help make this website better. By continuing to use this site without changing your settings, you are agreeing to our use of cookies.
Confirm