With our huge inventory of new, used and rental equipment, WesTrac has the right machine for the job.
Motor Graders
Compare Models
UNITS:
Metric
Imperial
Engine
Net Power - EEC 80/1269
399 kW
535 HP
-
-
Bore
137.2 mm
5.4 in
105 mm
4.1 in
130 mm
5.1 in
Stroke
152.4 mm
6 in
135 mm
5.3 in
157 mm
6.2 in
Note (1)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269
Standards in effect at the time of manufacture.
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269
Standards in effect at the time of manufacture.
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Note (3)
Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Power as declared per ISO 14396
Power as declared per ISO 14396
Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Note (2)
Optimized VHP Plus is standard for the 24.
Optimized VHP Plus is standard for the 24.
Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Optimized VHP Plus is standard for the 14M3.
Optimized VHP Plus is standard for the 14M3.
Standard Capability
50 °C
122 °F
50 °C
122 °F
50 °C
122 °F
Emissions
Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
China Nonroad Stage III and Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3/EU Stage IIIA
China Nonroad Stage III and Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3/EU Stage IIIA
Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
Note (4)
Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)
Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)
-
Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
Engine Model
Cat C27
Cat C27
Cat 7.1
Cat 7.1
Cat C13
Cat C13
Displacement
27.03 l
1648 in³
7.01 l
427.8 in³
12.5 l
763 in³
Number of Cylinders
12
12
6
6
6
6
Net Power Range (Tier 3)
-
97 kW
130 HP
-
Derating Altitude (AWD)
-
1676 m
5499 ft
-
Maximum Torque - ISO 9249
-
822 N·m
606 lb/ft
-
Derating Altitude
-
3000 m
9842.5 ft
-
Maximum Torque - AWD On
-
828 N·m
611 lb/ft
-
All-Wheel Drive Net Power Range (Tier 3)
-
101 kW
136 HP
-
Torque Rise - ISO 9294
-
42%
42%
-
Engine RPM
-
2,000
2,000
-
Base Power (1st Gear) - Net
-
-
178 kW
238 HP
Speed at Rated Power
-
-
1,850 rpm
1,850 rpm
Torque Rise
-
-
41%
41%
Maximum Altitude - Full Power
-
-
4237 m
13900 ft
Maximum Torque - VHP Plus
-
-
1542 N·m
1137 lb/ft
Maximum Altitude - Full Power (Tier 3)
-
-
4374 m
14349 ft
Maximum Altitude - Full Power (Tier 2)
-
-
3672 m
12049 ft
Standard - Fan Speed - Minimum
-
-
550 rpm
550 rpm
Note (5)
-
-
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Standard - Fan Speed - Maximum
-
-
1,600 rpm
1,600 rpm
Weights
Operating Weight - Typically Equipped
74985 kg
165314 lb
15803 kg
34839 lb
25968 kg
57250 lb
Gross Vehicle Weight - Base* - Total
-
-
23124 kg
50980 lb
Gross Vehicle Weight - Base* - Front Axle
-
-
6344 kg
13994 lb
Gross Vehicle Weight - Typically Equipped - Total
-
-
25968 kg
57250 lb
Gross Vehicle Weight - Typically Equipped - Rear Axle
-
-
19053 kg
42005 lb
Gross Vehicle Weight - Typically Equipped - Front Axle
-
-
6915 kg
15245 lb
Gross Vehicle Weight - Base* - Rear Axle
-
-
16780 kg
36994 lb
Note
-
-
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
Machine Weight
Weight*
73344 kg
161695 lb
-
Joystick Weight* Tier 3
-
15824 kg
34886 lb
Joystick All-Wheel Drive (AWD) Weight* Tier 3
-
16499 kg
36374 lb
Lever/Steering Wheel Weight* Tier 3
-
15699 kg
34610 lb
Note
-
*Typically equipped includes 3.7 m (12 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids.
*Typically equipped includes 3.7 m (12 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids.
Moldboard
Blade Width
7.3 m
24 ft
3.7 m
12 ft
4.3 m
14 ft
Blade Height
1025 mm
40 in
610 mm
24 in
-
Cutting Edge
-
152 mm
6 in
-
End Bit
-
152 mm
6 in
-
Cutting Edge Width
-
152 mm
6 in
-
Arc Radius
-
413 mm
16.3 in
413 mm
16.3 in
Throat Clearance
-
120 mm
4.7 in
117 mm
4.6 in
Blade Width - With End Bits
-
-
4290 mm
169 in
Blade Height - With Cutting Edge
-
-
631 mm
24.9 in
Blade Width - Without End Bits
-
-
4166 mm
164 in
Blade Height - Without Cutting Edge
-
-
585 mm
23 in
Blade Range
Maximum Depth of Cut
550 mm
21.7 in
775 mm
30.5 in
593 mm
23.3 in
Maximum Lift Above Ground
410 mm
16.1 in
410 mm
16.1 in
419 mm
16.5 in
Maximum Shoulder Reach Right
-
1928 mm
76 in
-
Circle Center Shift Right
-
656 mm
26 in
-
Blade Tip Range Forward
-
40
40
-
Moldboard Side Shift Right
-
663 mm
26.1 in
-
Blade Tip Range Backward
-
5
5
-
Maximum Shoulder Reach Left
-
1764 mm
69.4 in
-
Moldboard Side Shift Left
-
512 mm
20.1 in
-
Circle Center Shift Left
-
656 mm
26 in
-
Circle Centershift - Left
-
-
650 mm
25.6 in
Circle Centershift - Right
-
-
520 mm
20.5 in
Blade Tip Range - Backward
-
-
5°
5°
Maximum Shoulder Reach Outside of Tires - Right
-
-
2004 mm
78.9 in
Moldboard Sideshift - Right
-
-
790 mm
31.1 in
Moldboard Sideshift - Left
-
-
740 mm
29.1 in
Maximum Shoulder Reach Outside of Tires - Left
-
-
1870 mm
73.6 in
Blade Tip Range - Forward
-
-
40°
40°
Dimensions
Length of Machine*
9838 mm
387 in
Width
2592 mm
102 in
Width All Wheel Drive (AWD)
100.4 in
2551 mm
Maximum Height
3465 mm
136.4 in
Note
*Typically equipped with push block and ripper.
*Typically equipped with push block and ripper.
Service Refill Capacities
Circle Drive
7 l
1.8 gal (US)
7 l
1.8 gal (US)
Engine Crankcase
18 l
4.8 gal (US)
-
Transmission and Differential
60 l
15.9 gal (US)
89 l
23.5 gal (US)
Hydraulic System
97 l
25.6 gal (US)
125 l
33 gal (US)
Fuel Tank
246 l
65 gal (US)
416 l
109.9 gal (US)
Cooling System
52.5 l
14 gal (US)
60 l
15.9 gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Only)
-
22 l
5.8 gal (US)
Frame
Circle - Outer Diameter
1822 mm
71.7 in
Front Axle - Wheel Lean - Left/Right
17.1°
17.1°
Front Axle - Total Oscillation per Side
32°
32°
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).