With our huge inventory of new, used and rental equipment, WesTrac has the right machine for the job.
Excavators
Compare Models
UNITS:
Metric
Imperial
Engine
Engine Power - ISO 14396
129.4 kW
174 HP
-
100 kW
134 HP
Engine Power - ISO 14396 (DIN)
176 hp (metric)
176 hp (metric)
-
136 hp (metric)
136 hp (metric)
Engine Model
C4.4
C4.4
Cat C4.4
Cat C4.4
Cat C3.6
Cat C3.6
Net Power - ISO 9249
127.8 kW
171 HP
-
100 kW
134 HP
Net Power - ISO 9249 (DIN)
174 hp (metric)
174 hp (metric)
-
129 hp (metric)
129 hp (metric)
Bore
105 mm
4 in
105 mm
4 in
98 mm
3.9 in
Displacement
4.4 l
268.5 in³
4.4 l
269 in³
3.6 l
221 in³
Stroke
135 mm
5.3 in
127 mm
5 in
120 mm
5 in
Biodiesel Capability
Up to B20¹
Up to B20¹
-
Up to B20¹
Up to B20¹
Emissions
Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
-
Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
-
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
-
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Engine Power - Maximum Net - ISO 9249/SAE J1349 - Metric
-
112 kW (150 hp/152 PS)
112 kW (150 hp/152 PS)
-
Maximum Torque - 1,400 rpm
-
710 N·m
524 ft-lb
-
Engine Power - Maximum Gross - ISO 14396
-
117 kW (157 hp/159 PS)
117 kW (157 hp/159 PS)
-
Number of Cylinders - In Line
-
4
4
-
Ratings
-
2000 r/min
2000 r/min
-
Note
-
Meets stage IV emission standards
Meets stage IV emission standards
-
Transmission
Maximum Travel Speed
35 km/h
21.7 mile/h
Hydraulic System
Main System - Maximum Flow - Implement
306 l/min
81 gal/min
-
270 l/min
71 gal/min
Maximum Pressure - Equipment
37000 kPa
5366 psi
-
35000 kPa
5076 psi
Maximum Pressure - Swing
39500 kPa
5729 gal/min
-
35500 kPa
5149 psi
Maximum Pressure - Travel
35000 kPa
5076 gal/min
-
35000 kPa
5076 psi
Maximum Pressure - Implement Circuit - Normal
-
35000 kPa
5076 psi
-
Maximum Flow - Swing Mechanism
-
80 l/min
21 gal/min
-
Maximum Flow - Auxiliary Circuit - High Pressure
-
240 l/min
63 gal/min
-
Maximum Pressure - Implement Circuit - Travel Circuit
-
35000 kPa
5076 psi
-
Maximum Flow - Auxiliary Circuit - Medium Pressure
-
49 l/min
13 gal/min
-
Maximum Pressure - Auxiliary Circuit - High Pressure
-
35000 kPa
5076 psi
-
Tank Capacity
-
122 l
32 gal (US)
-
Swing Mechanism
-
37000 kPa
5366 psi
-
System
-
240 l
63 gal (US)
-
Maximum Flow - Implement/Travel Circuit
-
240 l/min
63 gal/min
-
Maximum Pressure - Implement Circuit - Heavy Lift
-
37500 kPa
5439 psi
-
Maximum Pressure - Auxiliary Circuit - Medium Pressure
-
18500 kPa
2683 psi
-
Machine Weight
Operating Weight Maximum
21200 kg
46740 lb
18000 kg
39683 lb
Operating Weight Minimum
18800 kg
41450 lb
15000 kg
33069 lb
Note (1)
-
Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires.
Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires.
Service Refill Capacities
Cooling System
31.7 l
8.4 gal (US)
-
24 l
6.3 gal (US)
Diesel Exhaust Fluid (DEF)
30 l
7.9 gal (US)
19 l
5 gal (US)
20 l
5.3 gal (US)
Hydraulic System - Including Tank
270 l
71.3 gal (US)
-
220 l
58.1 gal (US)
Hydraulic Tank
155 l
40.9 gal (US)
-
90 l
23.8 gal (US)
Final Drive
2.5 l
0.7 gal (US)
-
2.4 l
0.6 gal (US)
Fuel Tank
470 l
124.2 gal (US)
-
295 l
77.9 gal (US)
Fuel Tank - Total Capacity
-
240 l
63.4 gal (US)
-
Dimensions
Boom
5260 mm (17'3")
5260 mm (17'3")
5m (16' 6")
5m (16' 6")
Bucket
0.98 m³ GD (1.28 yd³)
0.98 m³ GD (1.28 yd³)
0.76m3 (.78 yd3)
0.76m3 (.78 yd3)
Stick
2.5 m (8' 2")
2.5 m (8' 2")
2.2m (7' 3")
2.2m (7' 3")
Shipping Height - Top of Cab
3370 mm
11 ft
10.9 mm
3315 ft
Shipping Length
8925 mm
29.3 ft
8210 mm
26.9 ft
Counterweight Clearance
1306 mm
4.3 ft
1260 mm
4.1 ft
Ground Clearance
420 mm
1.4 ft
325 mm
1.1 ft
Support Point
3580 mm
11.8 ft
-
Tail Swing Radius
2600 mm
8.5 ft
2150 mm
7.1 ft
Wheel Base
2700 mm
8.9 ft
2500 mm
8.2 ft
Undercarriage Length
-
4920 mm
16.1 ft
Working Ranges and Forces
Boom Type
VA Boom
VA Boom
VA Boom
VA Boom
Bucket
0.98 m³ GD (1.28 yd³)
0.98 m³ GD (1.28 yd³)
0.76m3 (0.99 y3) GD
0.76m3 (0.99 y3) GD
Stick
2.5 m (8' 2")
2.5 m (8' 2")
R2.2CB (7' 3")
R2.2CB (7' 3")
Reach at Ground Level
9290 mm
30.5 ft
8650 mm
28.4 ft
Vertical Wall Digging Depth
4230 mm
13.9 ft
4250 mm
13.9 ft
Cutting Height
9950 mm
32.6 ft
-
Bucket Forces (ISO)
137 kN
30799 lbf
-
Stick Forces (ISO)
92 kN
20682 lbf
-
Note (1)
Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0").
Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0").
Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') and heavy lift on. Pin-On Bucket (358-8619, GD, 1100 mm/3' 7", 0.68 m³/0.89 yd³ with Advansys 70 tips) with no quick coupler.
Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') and heavy lift on. Pin-On Bucket (358-8619, GD, 1100 mm/3' 7", 0.68 m³/0.89 yd³ with Advansys 70 tips) with no quick coupler.
Digging Height
-
5290 mm
17.4 ft
Dump Height
-
7010 mm
23 ft
Swing Mechanism
Swing Speed
9.2 r/min
9.2 r/min
-
9.1 r/min
9.1 r/min
Maximum Swing Torque
50 kN·m
37000 ft·lbf
42 kg/m²
30978 ft·lbf
39 kN·m
28860 ft·lbf
Maximum Swing Speed
-
9 r/min
9 r/min
-
Air Conditioning System
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.
Drive
Maximum Travel Speed - Road Mode
20 km/h
12.4 mile/h
-
Drawbar Pull - Road Mode
104 kN
23380 lbf
-
Maximum Travel Speed - Rail Mode
20 km/h
12.4 mile/h
-
Drawbar Pull - Rail Mode
45 kN
10116 lbf
-
Maximum Travel Speed
-
37 km/h
23 mile/h
Undercarriage
Road Ground Clearance
360 mm
1.2 ft
Rail Ground Clearance
195 mm
0.7 ft
Weights
Operating Weight*
22 900 kg - 23 900 kg (50,486 - 52,590 lb)
22 900 kg - 23 900 kg (50,486 - 52,590 lb)
Counterweights - Standard
6400 kg
14110 lb
Counterweights - Optional
7400 kg
16314 lb
Note
Operating weight includes medium stick, full fuel tank, operator and dual pneumatic tires. Weight varies depending on configuration.
Operating weight includes medium stick, full fuel tank, operator and dual pneumatic tires. Weight varies depending on configuration.
Working Ranges
Stick Length
2100 mm
6.9 ft
Stick Digging Force - ISO 6015
84 kN
18884 lbf
Digging Depth
5610 mm
18.4 ft
Digging Height
10070 mm
33 ft
Boom Type
VA Boom
VA Boom
Reach at Ground Level
9090 mm
29.8 ft
Dump Height
6920 mm
22.7 ft
Bucket Digging Force - ISO 6015
114 kN
25628 lbf
Note
Range values are calculated with GD Bucket 1100 mm, 0.80 m3 with tips K080 and CW-20-H.4.N quick coupler with a tip radius of 1574 mm. Breakout force values are calculated with heavy lift on (no quick coupler)and a cutting edge tip radius of 1237 mm.
Range values are calculated with GD Bucket 1100 mm, 0.80 m3 with tips K080 and CW-20-H.4.N quick coupler with a tip radius of 1574 mm. Breakout force values are calculated with heavy lift on (no quick coupler)and a cutting edge tip radius of 1237 mm.
Sustainability
Recyclability
93%
93%
91%
91%