With our huge inventory of new, used and rental equipment, WesTrac has the right machine for the job.
Excavators
Compare Models
UNITS:
Metric
Imperial
Engine
Engine Power - ISO 14396
110 kW
148 hp
129 kW
174 hp
129.4 kW
174 hp
Engine Power - ISO 14396 (DIN)
150 hp (metric)
150 hp (metric)
176 hp (metric)
176 hp (metric)
176 hp (metric)
176 hp (metric)
Engine Model
Cat® C4.4
Cat® C4.4
Cat® C4.4
Cat® C4.4
Cat C4.4
Cat C4.4
Net Power - ISO 9249
104.9 kW
141 hp
128 kW
171 hp
127.8 kW
171 hp
Net Power - ISO 9249 (DIN)
143 hp (metric)
143 hp (metric)
174 hp (metric)
174 hp (metric)
174 hp (metric)
174 hp (metric)
Bore
105 mm
4.1 in
105 mm
4.1 in
105 mm
4.1 in
Stroke
127 mm
5 in
127 mm
5 in
135 mm
5.3 in
Displacement
4.4 l
268.5 in³
4.4 l
268.5 in³
4.4 l
268.5 in³
Biodiesel Capability
Up to B20¹
Up to B20¹
Up to B20¹
Up to B20¹
Up to B20¹
Up to B20¹
Emissions
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Meets U.S. EPA Tier 4 Final, EU Stage V, and Korea Stage V emission standards.
Meets U.S. EPA Tier 4 Final, EU Stage V, and Korea Stage V emission standards.
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed 2,000 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed 2,000 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Drive
Maximum Travel Speed
35 km/h
21.7 mile/h
35 km/h
21.7 mile/h
35 km/h
21.7 mile/h
Hydraulic System
Main System - Maximum Flow - Implement
275 l/min
73 gal/min
254 l/min
67 gal/min
306 l/min
81 gal/min
Maximum Pressure - Implement Circuit - Normal
35000 kPa
5076 psi
35000 kPa
5076 psi
35000 kPa
5076 psi
Maximum Pressure - Implement Circuit - Heavy Lift
37000 kPa
5366 psi
37000 kPa
5366 psi
37000 kPa
5366 psi
Maximum Pressure - Implement Circuit - Travel Circuit
35000 kPa
5076 psi
35000 kPa
5076 psi
35000 kPa
5076 psi
Swing Mechanism
Maximum Swing Speed*
10.2 r/min
10.2 r/min
9.4 r/min
9.4 r/min
9.2 r/min
9.2 r/min
Maximum Swing Torque
43.8 kN·m
32305 lbf·ft
47.1 kN·m
34739 lbf·ft
52.5 kN·m
38,722 lbf·ft
Note (1)
*For CE-marked machine default value may be set lower.
*For CE-marked machine default value may be set lower.
*For CE-marked machine default value may be set lower.
*For CE-marked machine default value may be set lower.
*For CE-marked machine default value may be set lower
*For CE-marked machine default value may be set lower
Machine Weight
Operating Weight Maximum
18400 kg
40560 lb
19950 kg
43980 lb
21200 kg
46740 lb
Operating Weight Minimum
17000 kg
37480 lb
17100 kg
37700 lb
18800 kg
41450 lb
Note (1)
Operating weight includes full fuel tank, operator, bucket 700 kg (1,543 lb) and dual pneumatic tires. Weight varies depending on configuration. Typical configurations include 2500 mm (8'2") stick, 3300 kg (7,280 lb) counterweight, bucket and 220 kg (485 lb) quick coupler.
Operating weight includes full fuel tank, operator, bucket 700 kg (1,543 lb) and dual pneumatic tires. Weight varies depending on configuration. Typical configurations include 2500 mm (8'2") stick, 3300 kg (7,280 lb) counterweight, bucket and 220 kg (485 lb) quick coupler.
Operating weight includes full fuel tank, operator, bucket 610 kg (1,340 lb), and dual pneumatic tires. Weight varies depending on configuration. Typical configurations include 2.5 m (8' 2") medium stick and 3700 kg (8,157 lb) counterweight.
Operating weight includes full fuel tank, operator, bucket 610 kg (1,340 lb), and dual pneumatic tires. Weight varies depending on configuration. Typical configurations include 2.5 m (8' 2") medium stick and 3700 kg (8,157 lb) counterweight.
Operating weight includes full fuel tank, operator, bucket 700 kg (1,543 lb) and dual pneumatic tires. Weight varies depending on configuration. Typical configurations include 2500 mm (8'2") stick, 3600 kg (7,937 lb) counterweight, bucket and 220 kg (485 lb) quick coupler.
Operating weight includes full fuel tank, operator, bucket 700 kg (1,543 lb) and dual pneumatic tires. Weight varies depending on configuration. Typical configurations include 2500 mm (8'2") stick, 3600 kg (7,937 lb) counterweight, bucket and 220 kg (485 lb) quick coupler.
Service Refill Capacities
Fuel Tank
350 l
92.5 gal (US)
350 l
92.5 gal (US)
470 l
124.2 gal (US)
Diesel Exhaust Fluid (DEF)
20 l
5.3 gal (US)
20 l
5.3 gal (US)
30 l
7.9 gal (US)
Cooling System
24 l
6.3 gal (US)
32 l
8.5 gal (US)
31.7 l
8.4 gal (US)
Hydraulic Tank
120 l
31.7 gal (US)
120 l
31.7 gal (US)
155 l
40.9 gal (US)
Hydraulic System - Including Tank
260 l
68.7 gal (US)
260 l
68.7 gal (US)
270 l
71.3 gal (US)
Dimensions
Boom
Variable Adjustable Boom 5.2 m (17'1")
Variable Adjustable Boom 5.2 m (17'1")
Variable Adjustable Boom 5.2 m (17'1")
Variable Adjustable Boom 5.2 m (17'1")
Variable Adjustable Boom 5260 mm (17'3")
Variable Adjustable Boom 5260 mm (17'3")
Stick
2.2 m (7'3")
2.2 m (7'3")
2.5 m (8' 2")
2.5 m (8' 2")
2500 mm (8'2")
2500 mm (8'2")
Bucket
GD 0.8 m³ (1.05 yd³)
GD 0.8 m³ (1.05 yd³)
GD 0.91 m³ (1.19 yd³)
GD 0.91 m³ (1.19 yd³)
GD 0.98 m³ (1.28 yd³)
GD 0.98 m³ (1.28 yd³)
Shipping Height - Top of Cab
3300 mm
10.8 ft
3360 mm
11 ft
3370 mm
11.1 ft
Shipping Length
8640 mm
28.3 ft
8360 mm
27.4 ft
8925 mm
29.3 ft
Support Point
3870 mm
12.7 ft
3090 mm
10.1 ft
3580 mm
11.7 ft
Tail Swing Radius
2350 mm
7.7 ft
2350 mm
7.7 ft
2600 mm
8.5 ft
Counterweight Clearance
1301 mm
4.3 ft
1300 mm
4.3 ft
1306 mm
4.3 ft
Ground Clearance
395 mm
1.3 ft
325 mm
1.1 ft
420 mm
1.4 ft
Undercarriage Length
4970 mm
16.3 ft
5050 mm
16.6 ft
5050 mm
16.6 ft
Wheel Base
2550 mm
8.4 ft
2700 mm
8.9 ft
2700 mm
8.9 ft
Working Ranges and Forces
Boom
Variable Adjustable Boom 5.2 m (17'1")
Variable Adjustable Boom 5.2 m (17'1")
Variable Adjustable Boom 5.2 m (17'1")
Variable Adjustable Boom 5.2 m (17'1")
Variable Adjustable Boom 5260 mm (17'3")
Variable Adjustable Boom 5260 mm (17'3")
Stick
2.2 m (7'3")
2.2 m (7'3")
2.5 m (8' 2")
2.5 m (8' 2")
2500 mm (8'2")
2500 mm (8'2")
Bucket
GD 0.8 m³ (1.05 yd³)
GD 0.8 m³ (1.05 yd³)
GD 0.91 m³ (1.19 yd³)
GD 0.91 m³ (1.19 yd³)
GD 0.98 m³ (1.28 yd³)
GD 0.98 m³ (1.28 yd³)
Maximum Cutting Height
10110 mm
33.2 ft
10260 mm
33.7 ft
9950 mm
32.6 ft
Maximum Loading Height
7140 mm
23.4 ft
7300 mm
24 ft
6960 mm
22.8 ft
Maximum Digging Depth
5630 mm
18.5 ft
5890 mm
19.3 ft
6030 mm
19.8 ft
Maximum Vertical Wall Digging Depth
4410 mm
14.5 mm
4600 mm
15.1 ft
4230 mm
13.9 ft
Maximum Reach at Ground Level
8970 mm
29.4 ft
-
-
Bucket Forces (ISO)
119 kN
26752 lbf
119 kN
26752 lbf
137 kN
30799 lbf
Stick Forces (ISO)
75 kN
16861 lbf
75 kN
16861 lbf
92 kN
20682 lbf
Note (1)
Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on) and a tip radius of 1378 mm (4'6").
Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on) and a tip radius of 1378 mm (4'6").
Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on), and a tip radius of 1378 mm (4'6").
Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on), and a tip radius of 1378 mm (4'6").
Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). Force values are calculated with heavy lift on, a GD bucket (pin-on) and a tip radius of 1462 mm (4'10").
Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). Force values are calculated with heavy lift on, a GD bucket (pin-on) and a tip radius of 1462 mm (4'10").
Maximum Reach at Ground Line
-
9210 mm
30.2 ft
9290 mm
30.5 ft
Air Conditioning System
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg (1.8 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons).
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg (1.8 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons).
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons).
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons).
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons).
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons).
Sustainability
Recyclability
92%
92%