With our huge inventory of new, used and rental equipment, WesTrac has the right machine for the job.
Articulated Trucks
Compare Models
UNITS:
Metric
Imperial
Engine
Engine Model
Cat® C13
Cat® C13
Cat® C13
Cat® C13
Cat® C13
Cat® C13
Bore
130 mm
5.1 in
130 mm
5.1 in
130 mm
5.1 in
Stroke
157 mm
6.2 in
157 mm
6.2 in
157 mm
6.2 in
Displacement
12.5 l
762.8 in³
12.5 l
763 in³
12.5 l
736 in³
Net Power - ISO 14396
276 kW
370 HP
276 kW
370 HP
320 kW
429 HP
Gross Power - SAE J1995
280 kW
375 HP
280 kW
375 HP
324 kW
434 HP
No Engine De-rating Below
3810 m
12500 ft
3990 m
13100 ft
3810 m
12500 ft
Peak Engine Torque Speed
1200 r/min
1200 r/min
1200 r/min
1200 r/min
1200 r/min
1200 r/min
Peak Engine Torque Net (SAE J1349)
2120 N·m
1564 ft·lbf
-
2165 N·m
1597 ft·lbf
Net Power - SAE J1349
274 kW
367 HP
274 kW
367 HP
316 kW
424 HP
Engine Model - U.S. EPA Tier 4 Final/EU Stage V
Cat C13
Cat C13
-
Cat C13
Cat C13
Peak Engine Torque Gross (SAE J1995)
2141 N·m
1579 ft·lbf
1830 N·m
1350 ft·lbf
2188 N·m
1614 ft·lbf
Note (3)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Net power when the fan is at maximum speed is 274 kW (367 hp) per the SAE reference conditions.
Net power when the fan is at maximum speed is 274 kW (367 hp) per the SAE reference conditions.
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Emissions
The 730 meets Tier 4 Final and Stage V emission standards.
The 730 meets Tier 4 Final and Stage V emission standards.
The 730 EJ meets either Tier 2/Stage II or Tier 3/Stage IIIA equivalent emission standards.
The 730 EJ meets either Tier 2/Stage II or Tier 3/Stage IIIA equivalent emission standards.
The 735 meets Tier 4 Final and Stage V emission standards.
The 735 meets Tier 4 Final and Stage V emission standards.
Note (2)
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note (1)
The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
Note (4)
Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
-
Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Note (5)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
-
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Engine Model - Either U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage IIIA equivalent
-
Cat C13
Cat C13
-
Peak Engine Torque Net (ISO 14396)
-
1810 N·m
1335 ft·lbf
-
Weights
Rated Payload
28 t
31 ton (US)
27.1 t
30 ton (US)
32 t
35.3 ton (US)
Body Capacities
Heaped (SAE 2:1)
17.5 m³
23 yd³
16.9 m³
22.1 yd³
20 m³
26.2 yd³
Struck
13.3 m³
17.4 yd³
13.5 m³
17.7 yd³
15.5 m³
20.3 yd³
Tailgate Heaped SAE 2:1
18.8 m³
24.6 yd³
-
21.3 m³
27.9 yd³
Tailgate Struck
13.9 m³
18.2 yd³
-
16.3 m³
21.3 yd³
Transmission
Forward - 1
8 km/h
5 mile/h
8 km/h
5 mile/h
8 km/h
5 mile/h
Forward - 2
15 km/h
9 mile/h
15 km/h
9 mile/h
15 km/h
9 mile/h
Forward - 3
22 km/h
14 mile/h
22 km/h
14 mile/h
23 km/h
14 mile/h
Forward - 4
34 km/h
21 mile/h
34 km/h
21 mile/h
35 km/h
22 mile/h
Forward - 5
47 km/h
29 mile/h
47 km/h
29 mile/h
48 km/h
30 mile/h
Forward - 6
55 km/h
34 mile/h
55 km/h
34 mile/h
57 km/h
35 mile/h
Reverse - 1
9 km/h
6 mile/h
9 km/h
6 mile/h
9 km/h
6 mile/h
Sound Levels
Interior Cab
72 dB(A)
72 dB(A)
72 dB(A)
72 dB(A)
72 dB(A)
72 dB(A)
Note (1)
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Operating Weights
Front Axle - Empty
15000 kg
33069 lb
15230 kg
33576 lb
15480 kg
34128 lb
Front Axle - Loaded
18280 kg
40300 lb
15880 kg
35009 lb
19580 kg
43166 lb
Center Axle - Rated Load
12360 kg
27249 lb
13225 kg
29156 lb
13950 kg
30754 lb
Rear Axle - Loaded
16700 kg
36817 lb
18605 kg
41017 lb
18720 kg
41270 lb
Center Axle - Loaded
16920 kg
37302 lb
18825 kg
41502 lb
18940 kg
41756 lb
Total - Rated Load
28000 kg
61729 lb
27100 kg
59745 lb
32000 kg
70548 lb
Front Axle - Rated Load
3280 kg
7231 lb
650 kg
1433 lb
4100 kg
9039 lb
Total - Loaded
51900 kg
114420 lb
53310 kg
117528 lb
57240 kg
126192 lb
Center Axle - Empty
4560 kg
10053 lb
5600 kg
12346 lb
4990 kg
11001 lb
Rear Axle - Empty
4340 kg
9568 lb
5380 kg
11861 lb
4770 kg
10516 lb
Total - Empty
23900 kg
52690 lb
26210 kg
57783 lb
25240 kg
55645 lb
Rear Axle - Rated Load
12360 kg
27249 lb
13225 kg
29156 lb
13950 kg
30754 lb
Service Refill Capacities
Fuel Tank
412 l
108.8 gal (US)
412 l
108.8 gal (US)
412 l
108.8 gal (US)
Cooling System
83 l
21.9 gal (US)
83 l
21.9 gal (US)
83 l
21.9 gal (US)
Hydraulic System
110 l
29.1 gal (US)
110 l
29.1 gal (US)
110 l
29.1 gal (US)
Engine Crankcase
38 l
10 gal (US)
38 l
10 gal (US)
38 l
10 gal (US)
Transmission
47 l
12.4 gal (US)
47 l
12.4 gal (US)
56 l
12.3 gal (US)
Final Drives/Differential
125 l
33 gal (US)
125 l
33 gal (US)
125 l
33 gal (US)
Output Transfer Gear Box
24 l
6.3 gal (US)
24 l
6.3 gal (US)
25 l
5.5 gal (US)
DEF Tank
20 l
5.3 gal (US)
-
20 l
5.3 gal (US)
Body Hoist
Raise Time
12 s
12 s
12 s
12 s
Lower Time
8 s
8 s
11 s
11 s
Steering
Lock to Lock
4.75 seconds @ 60 rpm
4.75 seconds @ 60 rpm
4.75 seconds @ 60 rpm
4.75 seconds @ 60 rpm
4.75 seconds @ 60 rpm
4.75 seconds @ 60 rpm
Standards
Brakes
ISO 3450 – 2011
ISO 3450 – 2011
ISO 3450 – 2011
ISO 3450 – 2011
ISO 3450 – 2011
ISO 3450 – 2011
Cab - FOPS
ISO 3449 Level II – 2005
ISO 3449 Level II – 2005
ISO 3449 Level II – 2005
ISO 3449 Level II – 2005
ISO 3449 Level II – 2005
ISO 3449 Level II – 2005
Cab - ROPS
ISO 3471 – 2008
ISO 3471 – 2008
ISO 3471 – 2008
ISO 3471 – 2008
ISO 3471 – 2008
ISO 3471 – 2008
Steering
ISO 5010 – 2007
ISO 5010 – 2007
ISO 5010 – 2007
ISO 5010 – 2007
ISO 5010 – 2007
ISO 5010 – 2007
Body Plate
Type
High strength Brinell HB450 wear resistant steel
High strength Brinell HB450 wear resistant steel
High strength Brinell HB450 wear resistant steel
High strength Brinell HB450 wear resistant steel
High strength Brinell HB450 wear resistant steel
High strength Brinell HB450 wear resistant steel
Turning Circle
Turning Dimensions - Aisle Width
5332 mm
210 in
5424 mm
214 in
5393 mm
212 in
Turning Dimensions - Steer Angle - Left/Right
45°
45°
45°
45°
45°
45°
Turning Dimensions - Inside Radius
3879 mm
153 in
3849 mm
152 in
3793 mm
149 in
Turning Dimensions - SAE Turning Radius
7470 mm
294 in
7470 mm
294 in
7470 mm
294 in
Note
Dimensions are for machines equipped with 23.5R25 tires.
Dimensions are for machines equipped with 23.5R25 tires.
Dimensions are for machines equipped with 750/65 R25 tires.
Dimensions are for machines equipped with 750/65 R25 tires.
Dimensions are for machines equipped with 750/65 R25 tires.
Dimensions are for machines equipped with 750/65 R25 tires.
Turning Dimensions - Clearance Radius
8075 mm
318 in
8075 mm
318 in
8075 mm
318 in
Body Plate Thickness
Base Plate
13 mm
0.51 in
13 mm
0.51 in
Side Plates
11 mm
0.43 in
11 mm
0.43 in
Front Plate
7 mm
0.28 in
7 mm
0.28 in
Optimal Loader/Truck Pass Matching
Wheel Loaders: 966M/966M XE - Passes
4
4
4
4
4
4
Wheel Loader: 962M - Passes
4–5
4–5
4–5
4–5
4–5
4–5
Wheel Loader: 950M - Passes
5
5
5
5
5
5
Hydraulic Excavators: 336F/336F XE - Passes
5–6
5–6
5–6
5–6
5–6
5–6
Hydraulic Excavators: 349F/349F XE - Passes
4–5
4–5
4–5
4–5
4–5
4–5
Note
An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
An optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
An optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Wheel Loaders: 972M/972M XE - Passes
3–4
3–4
3–4
3–4
3–4
3–4
Eject/Retract Times
Eject Time
12 s
12 s
Retract Time
15 s
15 s