With our huge inventory of new, used and rental equipment, WesTrac has the right machine for the job.
Electric Rope Shovels
Compare Models
UNITS:
Metric
Imperial
Dimensions
Dipper Payload
64 t
70 t
82 t
90 t
109 t
120 t
Dipper Capacity
20.6-55.8 m3 (27-73 yd3)
20.6-55.8 m3 (27-73 yd3)
27.5-60.4 m3 (36-79 yd3)
27.5-60.4 m3 (36-79 yd3)
30.6-62.7 m3 (40-82 yd3)
30.6-62.7 m3 (40-82 yd3)
Note
Dependent on application and material density.
Dependent on application and material density.
Dependent on application and material density.
Dependent on application and material density.
Dependent on application and material density
Dependent on application and material density
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified)
-
-
109 t
120 t
Weights
Working Weight - With Dipper and Standard Links
1202927 kg
2652000 lb
1295777 kg
2856700 lb
1390714 kg
3066000 lb
Ballast - Furnished By Customer
260362 kg
574000 lb
260362 kg
574000 lb
302614 kg
667150 lb
Note (1)
These weights will vary slightly depending upon dipper and optional equipment selection.
These weights will vary slightly depending upon dipper and optional equipment selection.
These weights will vary slightly depending upon dipper and optional equipment selection.
These weights will vary slightly depending upon dipper and optional equipment selection.
These weights will vary slightly depending upon dipper and optional equipment selection
These weights will vary slightly depending upon dipper and optional equipment selection
Note (2)
All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads.
All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads.
All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.
All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.
Main Structures
Ground Bearing Pressure - 274.3 cm (108 in) Treads
296 kPa
43 psi
316 kPa
46 psi
-
Planetary Propel
Dual-motor independent drive.
Dual-motor independent drive.
Dual-motor independent drive.
Dual-motor independent drive.
Dual-motor independent drive
Dual-motor independent drive
Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard
10 m
32.75 ft
10 m
32.75 ft
-
Ground Bearing Pressure - Total Effective Bearing Area (2)
41 m²
442 ft²
41 m²
442 ft²
-
Ground Bearing Pressure
Ground bearing pressure is dependent upon many factors.
Ground bearing pressure is dependent upon many factors.
Ground bearing pressure is dependent upon many factors.
Ground bearing pressure is dependent upon many factors.
-
Ground Bearing Pressure - Total Effective Bearing Area (1)
32 m²
343 ft²
32 m²
343 ft²
-
Upper Works Overall Width - Including Standard Walkways
13.5 m
44.25 ft
13.5 m
44.25 ft
12.8 m
41.9 ft
Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads
10.6 m
34.75 ft
10.6 m
34.75 ft
-
Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard
371 kPa
54 psi
400 kPa
58 psi
-
Swing
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Hoist
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads
-
-
11.6 m
38 ft
Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard
-
-
11 m
36 ft
Ground Bearing Pressure - Note
-
-
Ground bearing pressure is dependent upon many factors
Ground bearing pressure is dependent upon many factors
Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm/102 in) Treads
-
-
46.6 m2 (298 kPa); 501.7 ft2 (43 psi)
46.6 m2 (298 kPa); 501.7 ft2 (43 psi)
Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm/79 in) Treads - Standard
-
-
36 m2 (382 kPa); 386 ft2 (55 psi)
36 m2 (382 kPa); 386 ft2 (55 psi)
Optimal Working Ranges*
Cutting Height - Maximum
14.9 m
48.75 ft
14.9 m
48.75 ft
Dumping Height - With Clearance to Open Dipper Door
9.4 m
30.84 ft
9.4 m
30.84 ft
Cutting Radius - Maximum
22.8 m
74.75 ft
22.8 m
74.75 ft
Radius of Level Floor
16 m
52.49 ft
16 m
52.49 ft
Revolving Frame Tail Swing Radius
9.3 m
30.51 ft
9.3 m
30.51 ft
Note (1)
Optimal working ranges based on loading a Cat® 793F truck.
Optimal working ranges based on loading a Cat® 793F truck.
Optimal working ranges based on loading a Cat® 793F truck.
Optimal working ranges based on loading a Cat® 793F truck.
Note (2)
*All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
*All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
*All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads.
*All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads.
Lube System
Type
Automatic, single-line system for open gear lubricant and grease.
Automatic, single-line system for open gear lubricant and grease.
Automatic, single-line system for open gear lubricant and grease.
Automatic, single-line system for open gear lubricant and grease.
Automatic, single-line system for open gear lubricant and grease
Automatic, single-line system for open gear lubricant and grease
Components (1)
6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
Components (2)
External fast fill from lower level.
External fast fill from lower level.
External fastfill from lower level.
External fastfill from lower level.
External FastFil from lower level
External FastFil from lower level
Electrical
Drive
IGBT Acutrol drive system.
IGBT Acutrol drive system.
IGBT Acutrol drive system.
IGBT Acutrol drive system.
IGBT Acutrol drive system
IGBT Acutrol drive system
Power Requirements - Peak power
3106 kW
4165 hp
3330 kW
4466 hp
3778 kW
3778 kW
Power Requirements - Voltage
3 phase, 50/60 Hz, 7,200V
3 phase, 50/60 Hz, 7,200V
3 phase, 50/60 Hz, 7,200V
3 phase, 50/60 Hz, 7,200V
3 phase, 50/60 Hz, 7,200V
3 phase, 50/60 Hz, 7,200V
Power Requirements - Average Power Demand
777-1087 kW (1,042-1,458 hp)
777-1087 kW (1,042-1,458 hp)
832-1165 kW (1,116-1,562 hp)
832-1165 kW (1,116-1,562 hp)
945-1322 kW
945-1322 kW
Power Requirements - 60 Hz
7,200V
7,200V
7,200V
7,200V
7,200V, 13,800V
7,200V, 13,800V
Power Requirements - 50 Hz
6,000V, 6,600V, 7,200V, 11,000V
6,000V, 6,600V, 7,200V, 11,000V
6,000V, 6,600V, 7,200V, 11,000V
6,000V, 6,600V, 7,200V, 11,000V
6,000V, 6,600V, 7,200V, 11,000V
6,000V, 6,600V, 7,200V, 11,000V
Note
Other voltages available to suit customer requirements.
Other voltages available to suit customer requirements.
Other voltage options available to suit customer requirements.
Other voltage options available to suit customer requirements.
-
Power Requirements - Note
-
-
Other voltage options available to suit customer requirements
Other voltage options available to suit customer requirements
System Voltage - Nominal
-
-
50/60 Hz, 7,200V
50/60 Hz, 7,200V
Front End
Rope Data - Crowd - Diameter
64 mm
2.5 in
64 mm
2.5 in
-
Rope Data - Dipper Trip - Diameter
16 mm
0.625 in
16 mm
0.625 in
19 mm
0.75 in
Rope Data - Hoist - Diameter
70 mm
2.75 in
70 mm
2.75 in
70 mm
2.75 in
Rope Data - Boom Suspension - Diameter
83 mm
3.25 in
83 mm
3.25 in
83 mm
3.25 in
Rope Data - Crowd - No.
1
1
1
1
-
Rope Data - Retract - No.
1
1
1
1
-
Rope Data - Dipper Trip - No.
1
1
1
1
1
1
Components
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
-
Rope Data - Boom Suspension - No.
4
4
4
4
4
4
Crowd
Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
-
Rope Data - Hoist - No.
2
2
2
2
2
2
Rope Data - Retract - Diameter
64 mm
2.5 in
64 mm
2.5 in
-
Note
High impact ropes available as an option
High impact ropes available as an option
-
-
Rope Data - Note
-
High impact ropes available as an option.
High impact ropes available as an option.
High impact ropes available as an option
High impact ropes available as an option
Type
-
-
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Crowd (1)
-
-
HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
Crowd (2)
-
-
(Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
(Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Dimensions - Working Ranges
Dipper Capacities
30.6-62.7 m3 (40-82 yd3)
30.6-62.7 m3 (40-82 yd3)
Maximum Dumping Height
8.8 m
28.9 ft
Dipper Payload
109 t
120 ton (US)
Operating Weight
1390714 kg
3066000 lb
Dimensions (Approximate) - Optimal Working Ranges*
Cutting Radius - Maximum
24.4 m
80 ft
Revolving Frame Tail Swing Radius
9.3 m
30.5 ft
Cutting Height - Maximum
16.3 m
53.5 ft
Radius of Level Floor
17.1 m
56.1 ft
Dumping Height - With Clearance to Open Dipper Door
8.8 m
28.9 ft
Note (1)
Optimal working ranges based on loading a Cat 795F AC truck.
Optimal working ranges based on loading a Cat 795F AC truck.
Note (2)
*All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.
*All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.